Lot # : 1909 - TACKLIFE Stud Metal Wood Wall Detector DMS03 TL-17

NEW, TACKLIFE Stud Finder Scanner 3 in 1 Metal, Wood Wall Detector. DMS03 [FOUR SCANNING MODE FOR DEEPER DETECT] - The stud finder is located in the center of wood studs in exact mode and deep mode up to 0.75 inches 20mm deep and 1.5 inches 38 mm deeper separately; Detecting the ferrous metal up to 4 inches 100mm and non-ferrous metals behind walls up 3.15 inches 80mm; Live AC wire mode locate live AC wires up to 2 inches 50mm deeper. [LARGER LCD SCREEN WITH THREE SIGNAL LIGHTS] - The detector has a large LCD display which could show four scan mode, detection depth, detection signal strength, battery, and audio signal indicator as well as the edges indicator, etc; The light show green when the detector was calibrated and get ready, as getting close to the center of the stud, the indicator will turn yellow to red. [AUTOMATIC CALIBRATION & AUDIBLE WARNING] - The wall detector could calibrate automatically, no need to press the button manually all the time, which was finished in the condition without nails, AC wires, or metal; The multi-function wall detector finders will provide an audio tone sound continually when the stud or AC wire is locating, saving your time and money. [UPGRADED AND ERGONOMIC DESIGN] - The TACKLIFE stud finder takes with upgraded and ergonomic design, which is so comfortable to hold from any angle satisfying your DIY and home projects; The cotton on the back has prevented the damage caused to the wall, safely and conveniently.