1992 JCB back hoe model 214, 4 x 4, extenda-hoe, includes 24" bucket and 4' forks. Cracked windshield. Meter reads 4692 but is not operational. Consignor declares unit runs and operates normally.

New Holland model 488, 9' steel rollers. PTO powered, Consignor declares unit is in good running order and was last used 5 years ago.

Agro Ttrend sprayer, 3 point hitch mount. 125 gallon capacity, 20 foot spray area.(8' main, 2 x 6' wings) Has not been used since 2022 but consignor declares in good working order

6 cylinder, 4 L engine, automatic transmission, power windows power locks. Some minor damage to rear quarter. Consignor declares unit starts and runs normally. Last year of use was 2024.

New Holland loader frame, skid steer. coupler, unit is brand new. never used will fit New Holland tractors

Portable sawmill, machine shop made. 48 inch circular blade 30' long., 8 foot carriage last use was 2024. Can be powered either by PTO or belt. Log capacity 24" x 24' long

HL - 15 tires,. Consigner declares unit is in good operating order, last used 2024

Allis Chalmers 4 furrow, 3 pt hitch mount

Normand 16' tandem axle ,hydraulic dump powered by tractor remote, side and rear doors

GMC 7000, unit starts and runs as normal, Frt axle 9000 llbs, rear axle 12000 lbs

New Holland corn head, model 360N6 , 6 row corn-head.,consignor declares unit will operate but some minor repairs would be helpful, last used in 2021

Deck boards need attention. Last used 2023

One slide out, shower, microwave, 3 burner stove. Three-way fridge last use, 2023.

10 ton feed bin 4 and 1/2 inch blow pipe 7 foot diameter unit, hopper bottom. Unit is not bolted down and help is available to load onto a truck or trailer

Baldor Reliance part #9700963, Consignor declares in good operating order

Tri- axle, Needs one tire but consignor will replace before sale.

New Holland back hoe model B115, 4 x 4, crab steering, extenda- hoe includes 60 inch forks and 8 foot loader bucket with reversible cutting edge currently in use. Meter reads 5350 hrs. Consignor declares unit is in good operating order and is currently in use.

2012 John Deere Model 17D, 3700 lbs machine , Meter reads 1772 hours Includes 15" bucket, Open ROPS, front blade. hydraulic thumb. Consignor declares unit starts runs and is in good operating condition.

Case model CX36B, Meter reads 7762 hours tracks in good shape and includes hydraulic thumb, Consignor declares in good operating order.

Bush Hog model BH15-2, Sixty inch cut, Twin blade, 3 point hitch mounted., PTO powered. Seller declares in good operating order, and was used this year.

Vertical Band Saw, ER Maier, 30" x 18" table, Automatic Cut.

ER Maier, 120 volt, 30" x 18", Automatic Cut.

DoAll, 24" x 24" table, 230 volt 3 phase, 12" Throat, Normal.

King 58", 220 volt single phase, Consignor declares electric motor is new.

Canox Stick welder, 265amp, AC/DC.

1/2 ton, Air Operated, Hook Mounted.

1/2 ton, Air Operated, Hook Mounted.

1/2 ton, Air Operated, Hook Mounted.

1/2 ton, Air Operated, hook mounted.

1/2 ton, Air operated, Hook Mounted.

1/2 ton , Air operated, hook mounted.

4500 lb capacity, 460 volt, 3 phase, remote control

1/2 ton capacity, 460 volt, 3 phase, remote control.

72 compartments.

72 compartments.

Maximart, 10" x 50" bed, 220 volt Single Phase, Drilling, Milling R8 Collet.

Roycal 10" x 50" Bed, 600 volt 3 phase, Drilling, Milling R8 Collet.

Dorbert, 12" x 55" Bed. 600 volt 3 Phase, Drilling Milling R32 Collet.

Techtop, 75 hp ,240 / 360 volt 3 phase. Consignor declares that this unit is new, never used.

4 Drawer, Letter Size.

4 Drawer, Letter Size

4 Drawer, Letter size

4 Drawer, Letter Size

4 Drawer, Letter size

4 Drawer, Letter Size

4 Drawer, Letter Size

4 Drawer, Letter Size

Motion Canada, 75 hp, 230/ 460 volt 3 Phase, 2 valve. Consignor declares that this unit is NEW, unused.

JDJ ,10 ton , 24 ' Wooden Deck, Beaver Tail Ramps, electric brakes

Hagedorn 275 Hydra-Spread , Plastic liner floor and sides. Consignor declares in good operating order.

Hagedorn 276 Hydra-Spread, Plastic Liner Floor and Sides, Consignor declares unit is in good operating condition

Case, serial #810T 01049, Gas, PTO, Drawbar, Electric and Crank Start. Consignor declares unit starts, runs and operates normally

Buhler Farm King, 6' wide, 3 Blade

Smyth, single auger, 102". Reversable and Standard Mount . Hydraulic swing and chute. PTO powered

Heston Model 8100, Draper Head with Side Cut Knives, Perkins Diesel engine. Consignor declares unit is in good running order.

2006 Atlas Copco, 185CFM. John Deere Diesel Engine, Consignor declares unit is in good running order

2" Pin Size, Fits Volvo EC460 excavator or similar 90,000 -110,000 lb excavator

Ridged model 300, 110 powered k

Kenworth

18 ft long, bunk style, bunk boards need replacing.

Genco model 2430,, 4 cyl. Perkins diesel, meter reads 6486 hours. Consignor declares in good running order

EBF Model 1040. Working unit, Consignor declares unit is out of the building under a tarp, CNC unit plugged in inside building,

Denver Vision, Consignor, declares. Unit has a programming issue is under a tarp and out of the building.

On late 70's GMC 1 ton chassis, 350 V8,auto trans, Consigner declares unit runs normally but needs some cosmetics

Originally from Saskatchewan. Original , Body is tight with an original hoist and pump , flathead V8 . Consigner declares engine needs some work

2000 Georgie- Boy on Ford V-10 Chassis, odometer reads 124276 miles, Onan 50 amp genny, 12' slide out, 2 roof top A/C units and 1dash A/C unit, 3 burner propane stove, oven, 3 way fridge/freezer, microwave, 2 x TV's, Levelling jacks in working order, Unit has been mechanically certified and comes with a safetty certificate.

5.9 litre Cummins .Diesel , 2 wheel drive, auto transmission, Unit was in an accident and involved in a roll over,, Engine appears in good condition and will run, Call for inspection, Unit being sold for parts, NO OWNERSHIP.

4 door Ranger, Body and Paint just done at a cost of $4,000.00, Needs final restoration. Includes a second 1958 Edsel for parts, Winning Bidder gets both cars. Delivery can be arranged with Consignor.

Consignor declares unit starts and runs as normal. Manual transmission

Martin Is gravity bin

Set of 2

PTO and hydraulic powered. Seller declares in good operating order

Loader

Craig 29 ton, Tandem duals,

10 trailer, Beaver Tail, 4ft ramps

3ph, hydraulic powered

18ft Shop built 1987 Hardy loader, 52 inch grapple, 2000 kilogramsm max working l

Six foot Lucknow, 3ph. PTO powered,,hydraulic chute rotation

Teledyne model 725 , 4.5" inch tool, Excavator mount, No hoses

From JD 160, will fit most 15-20 ton excavators

Includes electric pump, consignor declares in good working order, Previously held diesel fuel

Model C12 Rock. And concrete splitter., Includes one set of feathers,no wiphoses, 2 plugs

Model. C 12, , Includes wip hoses and one set of feathers

Model C12, Includes wip hoses and one set of feathers

Model C12, Includes wip hoses and one set of feathers

1000 psi, , Comes with hoses and manifold for use with Darda C12 splitters.

1979 international S1900, Ten speed fuller transmission, Consignor , declares unit starts runs and operates as normal

4 sets

1989 Komatsu WAS 600-1, Meter reads 10,400 Hours, Includes two extra Tires not on rims. Consigner declares unit starts runs and operates as normal. Also includes a set of detachable forks., 12 foot bucket., Cutting edge has no teeth.