Two Mallard decoys by William H. Williams (Pekin, IL, 1882-1964) including a Mallard Drake and a hen. These wood decoys are carved, hollow, two-piece, with pine body. Provenance: purchased by our seller from the estate of Edgar Vale, decoy maker, b. 1902. Shipping is available through third-party providers, see auction details for shipper recommendations

Two wood Mallard drake decoys by unknown makers including a large decoy with a broad, flat back with downward angled bill (correct for species); and a decoy with a feathering carved back and large patches of white on the sides, with a flat, white bottom with a broad wooden keel. Shipping is available through third-party providers, see auction details for shipper recommendations

Two wood duck decoys by unknown makers including a mallard hen with an anchor weight around neck, similar in style to that of decoy artist James Haubensak (Bartonville, IL) (?)); and a Canvasback drake in the style of O.E. Sterett (Monmouth, IL, b. 1899) Shipping is available through third-party providers, see auction details for shipper recommendations

A Perry Wilcoxen (Liverpool, IL, 1862-1954) Mallard Drake carved wood decoy consisting of two hollowed-out pieces of pine wood, a shallow depression in the head through the eye area. This decoy was given to Bernard Troth in 1938 by Harve Baughman, Wilcoxson's son-in-law. Shipping is available through third-party providers, see auction details for shipper recommendations

A Commercial Mallard Drake decoy with glass eyes, with "CWC" or "OWC" stamped in keel weight. One eye slightly to one side of the keel weight for attachment of the anchor line that has a small piece of line attached. Painting is in the style of Perry Wilcoxen. Shipping is available through third-party providers, see auction details for shipper recommendations

A Mallard Hen decoy with know eyes, initialed H B in the keel weight. Believed by the previous owner, Bernard Troth, to have been owned by Harv Baughman who possible repainted the duck that was made by Baughman's father-in-law, Perry Wilcoxen. Consisting of a two-piece hollow body and an eye for attachment of anchor line. There is a crack through the bill. Shipping is available through third-party providers, see auction details for shipper recommendations

A Widgeon Drake decoy by Herman Glick (Havana, IL). Carved on bottom, "H. Glick 77", with "Havana" stamped into the wood. Hollow with a little rattle. Shipping is available through third-party providers, see auction details for shipper recommendations

A Canvasback Drake decoy, similar to the canvasback drake made by O.E. Sterett (Monmouth, IL, b. 1899) pictured in plate 120 of the book "Decoys and Decoy Carvers of Illinois". Shipping is available through third-party providers, see auction details for shipper recommendations

Two Bluebill Drake decoys including D.W. Berglund, Aledo, IL signed on side of body and bottom of bill, with white sides and a dark back with feathers carved into the back and tail with a series of notches in the illusion of feathers; and an unknown maker with white on the sides and a white wing patch, with a darker back that has a combed feather pattern, leather strap for attachment of the anchor line and a lead weight on the flat bottom, glass eyes. Shipping is available through third-party providers, see auction details for shipper recommendations

Two Bluebill decoys including a drake by an unknown maker, purchased in central Illinois, with white on sides and across back, painted tack eyes; a small staple for anchor line attachment on flat bottom. Wear on the end of the tail indicated it was stood on end on its tail for transport in a boat when hunting; and a Bluebill decoy marked CDW on the bottom, hollow with a rattle inside and painted tack eyes, keel weight and small staple for attachment of anchor line on a rounded bottom Shipping is available through third-party providers, see auction details for shipper recommendations

A Bluebill decoy by Clark C. Howell (Havana, IL,1864-1936), carved from a single piece of wood, carved with C C Howell into bottom. Refinished by Dick Windish and repainted by Bernard Troth at the request of Windish, using book illustrations as a guide. Shipping is available through third-party providers, see auction details for shipper recommendations

This decoy is a Bluebill or ring-necked duck decoy that is marked on the bottom with a piece of tape that says "Reisinger old man" and also has the word "Hasting". Glass eyes, keel weight, and an eye for attachment of anchor line. Body contour is very deep breasted. The bluebill has a black tip and white ring just behind the black tip and at the base of the bill. Possibly by George Reisinger (Pekin, IL, 1880-1953) or James Reisinger (George's Son, 1906-1967) Shipping is available through third-party providers, see auction details for shipper recommendations

Two bluebill decoys including Charles Hitchcock (Douglas IL, b. 1880) decoy with harrow spike for keel weight, strongly built with painted tack eyes; and a bluebill decoy by unknown maker with white sides and black back, glass eyes, detailed carving in bill, thin rounded tail, rounded bottom with a keel weight and eye-ring for anchor line attachment. Shipping is available through third-party providers, see auction details for shipper recommendations

Two duck decoys including a ring-necked duck signed on bottom James Pollett, Lewistown Ill, 10/2/77, glass eyes; and a Wood duck drake with the word "Bruno" stamped into the wood on the bottom, decorative, not fitted with a keel weight or an attachment for an anchor line. Shipping is available through third-party providers, see auction details for shipper recommendations

A Hooded Merganser decoy with glass eyes and hole drilled through back into two-piece hollow body, painted by Bernard Troth in his interpretation of the proper painting for a decoy that he obtained as an unpainted, raw wood carving, original maker unknown; and a Mallard hen with a yellow, green and white scapula and painted eyes, keel weight and eye for attachment of the anchor line, maker unknown. Shipping is available through third-party providers, see auction details for shipper recommendations

A Mallard Drake decoy by Dick Windish (Elmwood, IL/Galesburg, IL), with glass eyes and a combed pattern in the paint on the back and sides, flat bottom painted white, without keel or eye for attachment of anchor line; and a Mallard drake decoy with a broad, thick body, glass eyes, combed paint pattern on back and sides, white painted flat bottom, without keel or eye for anchor line attachment Shipping is available through third-party providers, see auction details for shipper recommendations

A Commercially made Mallard decoy by Victor, with glass eyes, lead keel weight attached with two screws, eye for attachment of anchor line, little remaining paint and word "VICTOR" stamped into the wood of the flat bottom Shipping is available through third-party providers, see auction details for shipper recommendations

A Charles Hitchcock (Douglas, IL, b. ca. 1880) Mallard Drake decoy with a harrow spike for keel eight, strongly built with painted tack eyes, rounded bottom with wire loop for anchor line attachment. The harrow spike is this maker's signature. Shipping is available through third-party providers, see auction details for shipper recommendations

A Canada Goose decoy with glass eyes, cork body, flat bottom with small staple of anchor line attachment and metal keel weight attached with two screws with the marking "NO 58" Shipping is available through third-party providers, see auction details for shipper recommendations

Two duck decoys including black duck with glass eyes, turned head, in preening feathers on back position, nicely carved, flat-bottomed decoy without keel weight or eye for anchor line attachment, feather patterning in the painting of the entire body as well as on the bottom, purchased by Wand Troth in Maryland for her husband, Bernard; and a Mallard drake decoy with flat bottom, no keel weight or eye for anchor line, glass eyes, carving in back to suggest layers, painting includes seven white radial lines on the upper surface of the tail to suggest a feather pattern, cracked bill. Shipping is available through third-party providers, see auction details for shipper recommendations

Wood Mark 1 folding clasp knife, with original documentation and plastic case, Barry Wood, maker, etched on blade, open length 7.75" Shipping is available through third-party providers, see auction details for shipper recommendations

Three vintage folding knives, including Buck 112 lockblade, Gerber lockblade, and lockblade marked 'J 944' on blade Shipping is available through third-party providers, see auction details for shipper recommendations

M&A Schrock 9" hunting knife, etched on blade 1540M, selling with M&A Schrock finger knife, 6"l Shipping is available through third-party providers, see auction details for shipper recommendations

Hand made hunting knife by James B Lile (Arkansas, 1933-1991), 8.5"l, stag handle Shipping is available through third-party providers, see auction details for shipper recommendations

TM (Tom) Enos (FL) straight hunting knife, with Dall Sheep engraving on blade, also signed/dated 1975 and numbered 261 on blade, wood handle, 6.5"l Shipping is available through third-party providers, see auction details for shipper recommendations

Randall Made straight knife, marked RP McRory and Randall Made, Orlando, FL on blade, with Randall Made leather sheath, knife is 9"l Shipping is available through third-party providers, see auction details for shipper recommendations

(2) straight knives, one marked 'Davis' on blade (Barry Davis?), 5.75"l, and the other marked 'White' and '30' on blade, 5.5"l Shipping is available through third-party providers, see auction details for shipper recommendations

Stiletto knife by Bone, Lubbock, TX, 7.5"l, with leather sheath Shipping is available through third-party providers, see auction details for shipper recommendations

A straight knife marked on blade "Era II", by E Russ Andrews II (MO), with leather sheath, knife is 5.75"l Shipping is available through third-party providers, see auction details for shipper recommendations

(2) straight knives, including 8.75"l hunting knife marked 'Crabtree, Alma, Ark" and 6" filet knife marked Aeria, Shipping is available through third-party providers, see auction details for shipper recommendations

Group of (4) Buck folding knives, all in original boxes, including Colt model 703, Esquire model 501, Trapper model 311, and Muskrat model 313 Shipping is available through third-party providers, see auction details for shipper recommendations

A group of (5) pocket knives, including Parker Apache Teardrop, 2-blade "Sho Me Cutlery Club", Star Mini-Deerslayer with etched blade, Parker Bullet knife, and Parker Invincible Skinner, all are in original boxes Shipping is available through third-party providers, see auction details for shipper recommendations

Group of (4) pocket knives, including Schrade Walden 735 Rigging knife with spike, vintage Remington R1399 single blade, Remington single blade, and vintage Remington 4-blade Shipping is available through third-party providers, see auction details for shipper recommendations

Group of (5) pocketknives, including vintage Cattaraugus Cutlery 2-blade (predecessor to Case), vintage Kabar 2-blade, Gerber 2-blade, Inox/Abercrombie&Fitch utility knife and Holland 'tourist' German single blade Shipping is available through third-party providers, see auction details for shipper recommendations

Group of (3) straight knives, including 10" Buck, 10.75" I Wilson, and 6.5" AG Russell, with leather boot sheath Shipping is available through third-party providers, see auction details for shipper recommendations

(3) vintage knives, including curved blade Herter's, 11"l, curved blade I Wilson, 9"l, and Old File Co, Havana ILL, butcher knife10.5"l Shipping is available through third-party providers, see auction details for shipper recommendations

Group of three items, including Keen Kutter chisel (no handle), Queen Cutlery (PA) paring knife, and AG Russell P51 small hunting knife, with leather belt holster Shipping is available through third-party providers, see auction details for shipper recommendations

Two Buck straight knives, including 'Caper' model 116, with original box and sheath, and Skinner model 103, with matching sheath Shipping is available through third-party providers, see auction details for shipper recommendations

Two Buck straight knives, 9.25" and 7.5" long, both with original Buck sheaths Shipping is available through third-party providers, see auction details for shipper recommendations

WWII era USMC Pal knife, with red spacer, parkerized blade, 12" long, original sheath Shipping is available through third-party providers, see auction details for shipper recommendations

DH Russell stag-handle hunting knife, 8"l, with fish logo and 'DH' etched on blade, with leather sheath Shipping is available through third-party providers, see auction details for shipper recommendations

A group of (4) straight knives, including Frost Cutlery Coon Skinner, 5.5"l, with sheath, Gensco (Sweden) 8"l, with sheath, Olsen throwing knife, 11"l, with sheath, and Stewart's Hand Made butcher knife, 10.5"l Shipping is available through third-party providers, see auction details for shipper recommendations

Two, vintage Case XX pocket knives, including 6250 Elephant Toe 2-blade knife, with elephant etched on primary blade, and 62131 Canoe 2-blade, with canoe etched on primary blade, both in nice condition Shipping is available through third-party providers, see auction details for shipper recommendations

Group of (4) folding knives, including vintage Kabar 3-blade, Kleintools (Japan) lockback with leather sheath, Parker Apache Teardrop in original box, and Schrade Silhouette Cliphanger, in box Shipping is available through third-party providers, see auction details for shipper recommendations

Case Buffalo P172 Folding Knife, 4-dot, wood handles, nickel silver bolsters, buffalo etched on blade, with original wood display box and outer slip cover, very nice condition! Shipping is available through third-party providers, see auction details for shipper recommendations

Two, vintage Case folding knives, including Case XX Sod Buster single blade, and Case Trapper 3254 2-Blade knife in original box Shipping is available through third-party providers, see auction details for shipper recommendations

Group of (4) Straight/Hunting Knives, including vintage Schrade mdl 152 'Skinning' blade, in original box with leather sheath, Case XX 'Tordon' with leather sheath, J Marttini (Finland) filet knife with sheath, and Imperial Pro Guide hunting knife, with sheath Shipping is available through third-party providers, see auction details for shipper recommendations

Schrade Cutlery Scrimshaw Kachina lock-blade knife, with beaded belt sheath, in original box, ltd edition #6670, box size- 9 x 6.25 x 2 Shipping is available through third-party providers, see auction details for shipper recommendations

Kai Kershaw 'Floating Fish Knife', model 1234, with 6.5" blade, ABS sheath, lanyard, and drain holes, in original box Shipping is available through third-party providers, see auction details for shipper recommendations

Victor 3N Commemorative Foot Trap, in Box, mfg by Woodstream Corp, CofA in lid label, serial # 982, box size- 15 x 7 x 4.5 Shipping is available through third-party providers, see auction details for shipper recommendations

US Colt 1863 .58cal Percussion Rifle US 1863 , Serial # NSN Transfer: Exempt, Antique Civil War Union Army, stamped 1863 on lockplate and on barrel, bayonet, inspector stamp VP on barrel, also with Eagle cartouche on lockplate, includes canister of mini-balls, and bullet mold by Hensley and Gibbs, San Diego, CA, FFL transfer not required

Harrington and Richardson 20ga single-shot shotgun, serial A164873, patented 1900 (stock is cracked) $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Winchester Model 1912 16ga slide action semi-auto shotgun, last patent date on barrel July 12, 1913, serial 94991 $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Remington model 700BDL rifle, .270cal, serial B6274322, with Redfield 3x-9x scope, with checkered stock, purchased in early 1980s, only fired a few times, excellent condition! $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Remington mdl 12-C .22S/L/LR cal slide action semi-auto rifle, 24" octagon barrel, serial 810479 $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Remington Model 4 .22S/L/LR single-shot rifle, 22.5" barrel, rolling block action, serial 352851 $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Ruger New Model Single-Six .22cal revolver, 5.5" barrel, 'Star' model mfg 1974-1975, with star stamp on underside of frame, serial 63-45540, with original box, and leather belt holster $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

RWS Diana 5.5/.22cal Air Rifle Transfer: Exempt Model 48.52, serial 02051304, FFL transfer not required

Crosman 180 .22cal pellet Air Rifle smooth wood stock, overall length 34.25", FFL transfer not required (Missing front sight)

Glock model 26 9x19 semi-auto pistol, with original case, excellent condition, with 2- 10rd magazines, serial # MBZ887 $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Glock model 26 9x19 semi-auto pistol, with original case, excellent condition, with 3- 10rd magazines and waistband holster, serial # MBZ891 $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Smith and Wesson model 66-2 anniversary model revolver, .357 magnum, Indiana State Police 1933-1983 commemorative, 6" solid rib barrel, stainless, walnut grip, marked 1 of 1117, serial 308K177 $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Walther semi-auto pistol, model PPK/S-1, .380ACP, with four, 7rd magazines, case, and waistband holster, made in USA, serial 3712BAK $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Group of ammunition, including 1 full box and two partial boxes of .380 ACP (mostly JHP), 2- 25rd boxes of 9mm JHP, and one box of 9mm with 48rds, mostly JHP with some remanufactured FMJ, shipping is NOT available (local p/u only)

Mossberg model 341 bolt-action repeating rifle (No magazine), .22S/L/LR, deluxe walnut checkered stock, comes with ProMax hard case, serial 521149, some light wear on stock from typical use $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Ruger model 10-22 semi-auto rifle (NO magazine), carbine length with 18" barrel,.22LR, smooth stock, serial 126-49541, comes with ProMax hard case $15 FFL transfer fee will apply; out-of-state buyers must provide receiving dealer FFL prior to getting shipping quote.

Water buffalo shoulder mount, horn width- 40", and approx 39.5" deep SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

South African red Hartebeest shoulder mount, max width- 16", 41"h (measurements are approximate) SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A shoulder mount taxidermy of an Eland, horn width 17", ear width- 22", shoulder width- 24", approx 51" overall height (shows some age/imperfections) SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

Reedbuck shoulder mount taxidermy, 27"h, max width 12.5" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A Gazelle shoulder mount taxidermy, approx 35"h, 11"w SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

Impala shoulder-mount taxidermy, approx 33"h x 15"w SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

African Waterbuck shoulder mount taxidermy, approx 29"h, 13.5"w SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A ten point, Whitetail deer should mount, rack width approximately 17" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

An African Waterbuck shoulder mount. SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

An eight tail, Whitetail deer shoulder mount. Rack width approximately 20" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A sixteen point, Whitetail deer shoulder mount. Rack width approximately 17" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

African Wildebeest shoulder mount taxidermy, approx 32"h, 21.5"w

A fourteen point, Whitetail deer shoulder mount with drop tine. Rack width 22" wide.

An eight point, whitetail shoulder mount. Rack width approximately 19" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A nine point, whitetail deer shoulder mount. Rack width approximately 18" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A ten point, whitetail shoulder mount. Rack width approximately 13" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A nine point, whitetail deer shoulder mount. Rack width approximately 14.5" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

An eight point, whitetail deer shoulder mount. Rack width approximately 19" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

An eight point, whitetail deer shoulder mount. Rack width approximately 20" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

An American Elk twelve-point shoulder mount. Rack approximately 41" wide SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A Whitetail, ten-point shoulder mount. Rack width approximately 26" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A Mule Deer, eleven-point shoulder mount. Rack width approximately 24" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A full body New Zealand Taher Mountain Goat, Mounted on fabricated faux stone base with wall mount brackets. Overall approximate dimensions: 54" high x 54" long x 21" width (of base) SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

An African Waterbuck shoulder mount. Approximately width 22" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A large African Eland shoulder mount. SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A large African Kudu shoulder mount. Impressive, approximately 34" long horns. SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A full body coyote mount, on base. Overall approximately 30" high, 20" x41" base SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A full body Mexican Coues Deer mount, in reclining position. Eight point rack. Overall length approximately 47". Overall height approximately 33" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A set of steer horns, bound together by a tooled leather wrap, with initials "RGE", approximately 7' long (binding a bit loose)

A whitetail deer shoulder mount on stand, 'drinking from creek' position. Approximately 30" high x 10" x 25" SHIPPING IS NOT RECOMMENDED- local pickup preferred, shipping will be expensive! However, contract pickups are OK, but many of those contractors do NOT adhere to our 10-day time limit for abandonment. Please only bid if you have the ability to have the item removed/picked up within 10 days.

A limited edition, framed lithograph by Carl Brenders, "A Young Generation- Cottontails", signed in pencil lower right, numbered lower left 258/1250, also signed in plate, dated '89, as framed: 38.5 x 28.5

A limited edition, framed lithograph by Terry Redlin, "Gathering of Friends", signed in pencil lower right, #206/9500, signed in plate 2002, as framed: 29.5 x 42.5

A limited edition, framed lithograph by Terry Redlin, "Good Morning, America!", signed in pencil lower right, #181/9500, signed in plate 2001, as framed: 29 x 42.5

A limited edition, framed lithograph by Terry Redlin, "Lazy Afternoon", signed in pencil lower right, Edition of CE, #1681/5000, signed in plate 2000, National Wild Turkey Federation badge, as framed: 27 x 38

A framed, limited edition lithograph by Jean Vietor (IN, 1933-2023), 4pc matted prints, includes male Cardinal, signed and numbered 105/750 in pencil, also signed and dated '86 in print; also depicts (unsigned); bird feeder and two nuthatch. Size as framed 29 x 27.5

Framed giclee on canvas, limited edition, by Daniel Smith (MT, b 1954), signed and numbered lower right, #1393/2600, dated in print '07, depicting elk herd (couple of light scratches in image), as framed: 23 x 38.75

Carl Madden (American, 20th Cent) 24x36 , O/C , signed lower right , Path to the Mountain size as framed: 31 x 43

Limited edition framed lithograph, by Stephen Lyman, dated in print 1985, "Autumn Gathering", pencil signed, numbered 13/850, depicting deer in landscape, with original print sleeve from Greenwich Workshop, size as framed: 13 x 31

Limited edition framed lithograph by Wilhelm Goebel, "In the Valley of Kings", depicting wild turkeys, signed in pencil lower right, numbered 35/2100, and with National Wild Turkey Federation badging, as framed: 24.5 x 33.5

Framed, limited edition lithograph by Malcolm Earles, "Mischief III", depicting a skunk and grasshopper, pencil signed lower right, numbered 733/1500, also signed/dated in print, 1978, as framed: 22 x 19.5, with label verso

A framed lithograph depicting a black labrador in a pickup, by Barbara Shipman, "Pushed to the Limit", South Carolina Waterfowl Ass'n sticker on truck window, signed lower right, as framed: 26 x 33

Framed, limited edition lithograph by Bruce Miller, depicting deer, NWTF text at top of image, numbered 1035/1500, pencil signed lower right, dated and signed in plate, '98, as framed: 28 x 32.5

Limited edition framed lithograph by C Don Ensor, "Frontier Heritage", signed in pencil lower right and lower left, plate 14, label verso indicates edition of 5000, as framed: 24.5 x 30.5

Framed, limited edition stamp print lithograph, by Bob Sopchick, National Wild Turkey Federation, signed in pencil lower right, numbered 1897/2300, with six stamps, and NWTF badging, 2002, size as framed: 26.5 x 20.5

Framed lithograph by William Gillies, depicting lakeside Labrador retriever, c 1981, size as framed: 22 x 26

P. Citrin (20th Century) 20x24 , O/C , signed lower left , Teal Heads in Flight as framed: 28x32

A framed print of National Wild Turkey Federal stamp prints, years are from 1981-2001, and also with print of wild turkeys at center, size as framed: 21 x 22.5

Framed, limited edition lithograph by Christopher Walden, NWTF print, signed in plate and hand signed lower right, "Visual Impact", depicting cougar chasing wild turkey, numbered 1530/2000, 1999, as framed: 27.75 x 35

Framed limited edition lithograph, National Wild Turkey Federation, "Florrie's Place", depicting black lab, unclearly signed lower right, 1869/2300, size as framed: 26x 31

Limited edition framed stamp/research print, image by Maass, 530/2100, "Research Print, 2001, Lumbro Valley Courtship", and with five NWTF stamps, size as framed: 28 x 21

Framed lithograph by Charles Frace (American) depicting whitetail fawn, size as framed: 29 x 25