FODGE PULP INC. - ONLINE AUCTION
FODGE PULP INC. - ONLINE AUCTION
James G. Murphy Co. | BONNERS FERRY, ID 83805
Date(s) :  9/11/2024 - 9/18/2024
Buyer Premium :  13%


Online Only Auction
Start Date: 10:00 AM | Wednesday - September 11 End Date: 10:00 AM | Wednesday - September 18
Chipping Facility & Rolling Stock
1 APPROX 20' 7-STRAND H-CHAIN TREE LENGTH INFEED
LOG DECK (BARKERS), H-SHAFT, T-SPROCKETS, MARKED SUPPORTS TO GROUND
2 MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE
FOR LOT 1)
3 15' 8-STRAND H-CHAIN TREE LENGTH LOG DECK
(BARKERS), S-DRIVE, MARKED SUPPORTS TO GROUND
4 MOTOR TO REX EARTH REDUCER (NO DATA) W/DRIVE
CHAIN (DRIVE FOR LOT 2)
5 EXCO
50' 15-ARM LOG STOP & LOADER W/SAS 20 HP HYDRAULIC UNIT, SUPPORTS TO 1ST HORIZONTAL BEAM, HYDRAULIC LINES FROM HYDRAULIC UNIT
6 PRENTICE HYDRO AX 180D
REMOTE OPERATED HYDRAULIC STATIONARY LOG LOADER W/75 HP MOTOR, SUPPORTS TO 1ST HORIZONTAL (CONTROLS IN CAB SELL W/LOT 7) SERIAL NUMBER: 39515
7 6'X6' SOUNDPROOF OPERATORS CAB W/MARKED CONTROLS,
STEEL SUPPORT STRUCTURE TO GROUND W/STAIRS (NO HYDRAULIC LINES)
8 APPROX 15' 7-STRAND H-CHAIN X-OVER LOG DECK,
S-DRIVE W/STEEL PLATE & WHITE STEEL SUPPORTS
9 MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE
FOR LOT 8)
10 NICHOLSON
27" 6-ARM RING DEBARKER W/AIR SEAL, APPROX 100 HP RING DRIVE MOTOR, APPROX 50 HP FEED ROLL DRIVE MOTOR TO SM CYCLO REDUCER, (4) INFEED & (4) OUTFEED ROLLS, 5 HP HYDRAULIC UNIT, (2) LUBE UNITS, SUPPORTS TO 1ST HORIZONTAL BEAM
11 APPROX 24"X56' INFEED LOG HAUL W/INFEED SPIKE
ROLL, H&T DRUMS, STEEL TROUGH
12 MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE
FOR LOT 11)
13 24"X120' OUTFEED BELT LOG HAUL (FROM NICHOLSON)
W/(5) KICKERS, MARKED SUPPORTS
14 MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE
FOR LOT 13)
15 PETERSON DDC-5000G
HYDRAULIC OPERATED FLAIL DEBARKER (MOUNTED ON LOG DECK), DUAL FLAIL STATIONS, POWERED FEED THRU ROLLS, 200 HP HYDRAULIC UNIT, NO SUPPORTS (ORIGINAL MACHINE WAS IN A FIRE, OVER $100,000 SPENT TO REBUILD & INSTALL. PLEASE CONSULT AUCTION SITE REP FOR DETAILS) SERIAL NUMBER: 2G58484
16 FLARE
18"X52' INFEED BELT LOG HAUL (TO FLAIL), SUPPORTS TO 1ST HORIZONTAL BEAM
17 APPROX 10 HP MOTOR TO FLENDER 13.52:1 REDUCER
W/DRIVE CHAIN (DRIVE FOR LOT 16)
18 25' 6"X11-1/2" OUTFEED CHAIN LOG HAUL (FROM
FLAIL), H&T DRUMS (NO SUPPORTS)
19A BALDOR
15 HP MOTOR TO DODGE SHAFT MOUNTED 24.52:1 RATIO REDUCER
19B LANDMARK
10 HP MOTOR TO MCGUIRE 20:1 REDUCER W/SPARE BALDOR 10 HP MOTOR (ABANDONED DRIVE FOR LOT 18)
20 ALLEN BRADLEY
7-SECTION MCC W/(27) SWITCHES W/BUILDING (NO WIRE OUTSIDE OF BOX. MACHINERY HAS PRIORITY OVER BUILDING)
21 2009 AUTO DIRECT/SPRECHER & SCHUH PCS
300 HP SOFT START FOR HOG (NO WIRE OUTSIDE OF BOX)
22 LOT, (3) EMERSON UNIDRIVE FREQUENCY DRIVES (NO
WIRE OUTSIDE OF BOX)
23 ALLEN BRADLEY 5555
PLC W/(1) ETHERNET IP, (1) DH+R10, (1) DC INPUT MODULE W/ALLEN BRADLEY REMOTE I/O W/(14) MODULES (NO WIRE OUTSIDE OF BOX)
24 WESTINGHOUSE POW-R-LINE
2,000 AMP MAIN W/(4) BREAKERS, 480Y/277V (NO WIRE OUTSIDE OF BOX)
25 2020 SIEMENS SIRIUS
200 HP SOFT START W/ABB SACE TMAX ADJUSTABLE TRIP BREAKER (NO WIRE OUTSIDE OF BOX)
26 LOT, TRANSFORMER (NO DATA) W/SIEMENS 150 AMP
CIRCUIT BREAKER, A/C, HEATER, LIGHTING & LOOSE ELECTRICS
27 LOT, ALL UNSOLD MARKED CATWALK, STAIRS, AIR
LINES, UNSOLD HYDRAULIC LINES & SUPPORTS IN THIS AREA
28 APPROX 28' 6"X11-1/2" BOX CHAIN CLEAN OUT
CONVEYOR (UNDER NICHOLSON), H&T DRUMS, STEEL TROUGH
29 BALDOR
MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE FOR LOT 28)
30 APPROX 60' 6"X11-1/2" BOX CHAIN CLEAN OUT
CONVEYOR (UNDER PETERSON), H&T DRUMS, STEEL TROUGH & RETURN
31 BALDOR
MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE FOR LOT 30)
32 1990 QNW 740B
ROTARY SCREW COMPRESSOR W/150 HP MOTOR, AIR COOLED, MARKED PIPING TO DRYER
33 PNEUMATECH EE-500
AIR DRYER, HEAT REACTIVATED REGENERATIVE, 500 SCFM, 150 PSIG, TWIN TOWER, MARKED PIPING TO COMPRESSOR & WALL
34 ROY HANSON
650 GALLON AIR RECEIVER (NO PIPING)
35 APPROX 40' 6"X11-1/2" BOX CHAIN W/FLITES CONVEYOR
(TO LOT 39), H&T DRUMS, STEEL TROUGH & RETURN
36 APPROX 10 HP MOTOR TO MCGUIRE M10 REDUCER W/DRIVE
CHAIN (DRIVE FOR LOT 35)
37 JEFFREY 42X36B
HAMMER HOG W/DROP INFEED CHUTE, BOTTOM DISCHARGE, SUPPORT STRUCTURE, STAIRS & MARKED ELECTRICS
38 TECO
250 HP/1,180 RPM/449TZ FRAME MOTOR W/COUPLER (REPLACED W/REBUILD IN 2020)
39 APPROX 75' 6"X11-1/2" BOX CHAIN W/FLITES CONVEYOR
(TO HOG), H&T DRUMS, STEEL TROUGH, SUPPORTS
40 APPROX 10 HP GEARHEAD MOTOR W/DRIVE CHAIN (DRIVE
FOR LOT 39)
41 APPROX 34' 6"X11-1/2" W/FLITES OUTFEED CONVEYOR
FROM HOG, H&T DRUMS, STEEL TROUGH, SUPPORTS
42 APPROX 10 HP GEARHEAD MOTOR W/DRIVE CHAIN (DRIVE
FOR LOT 41)
43 BLACK CLAWSON
116" 6-KNIFE WHOLE LOG CHIPPER W/IGGESUND KNIFE CONVERSION, INFEED SPIKE ROLL, BEARING OILER, APPROX 30'-32'H X 20'W X 25'L STEEL BUILDING, STAIRS (SPARE PARTS SOLD AT LOT 46)
44 GE
1,250 HP/327 RPM/2,300V/9405-1-1 FRAME AC CHIPPER MOTOR (NO WIRE OUTSIDE OF BOX. OVER $150,000 SPENT IN REBUILDING COSTS, PLEASE CONSULT AUCTION SITE REP FOR DETAILS.)
45 MOTOTRONICS
1,250 HP/2,300V SOLID STATE STARTER (NO WIRE OUTSIDE OF BOX)
46 LOT, CHIPPER PARTS (FITS LOT 43)
51 APPROX 18"X60' INFEED LOG BELT (TO CHIPPER), H&T
DRUMS, STEEL TROUGH (NO SUPPORTS)
52 GE
20 HP MOTOR TO 83.6 RPM REDUCER W/DRIVE CHAIN (DRIVE FOR LOT 51)
53 14' 10-STRAND H-CHAIN LOG TRANSFER W/8-ARM LS&L,
S-DRIVE, STEEL DECK & WALL, SUPPORTS TO 1ST HORIZONTAL BEAM
54 GEARHEAD MOTOR (NO DATA) W/DRIVE CHAIN (DRIVE FOR
LOT 53)
55 APPROX 36"X55' OUTFEED CHEVRON BELT W/APPROX 40
HRS OF USE ON NEW BELT (FROM CHIPPER), H&T DRUMS, STEEL FRAME & SUPPORTS
56 MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE
FOR LOT 55)
57 APPROX 36"X45' CHEVRON OUTFEED BELT W/APPROX 40
HRS OF USE ON NEW BELT (FROM LOT 55), H&T DRUMS, STEEL FRAME & SUPPORTS, DROP FEED CHUTE
58 MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE
FOR LOT 57)
59 APPROX 3' DIA CYCLONE W/PIPING TO LOT 63
60 BLACK CLAWSON
6'X12' 2-DECK CHIP SCREEN W/MARKED CONVEYOR
61 BLACK CLAWSON
6'X12' 2-DECK CHIP SCREEN
62 APPROX 30" BLOWER W/LANDMARK 40 HP MOTOR W/MARKED
PIPING
63 CM&E NORMAN
36" RE-CHIPPER W/GE 50 HP MOTOR
64 APPROX 14"X86' PADDLE BELT CONVEYOR W/GEARHEAD
MOTOR (FROM LOT 60)
65 LOT, MARKED ELECTRICS & SUPPLIES W/WOOD BUILDING
66 LOT, STEEL FRAMED STRUCTURE OVER SCREENS
(MACHINERY HAS PRIORITY OVER BUILDING)
67 APPROX 24"X60' BELT CONVEYOR W/SPEED UP BELT,
PARTIALLY COVERED W/SUPPORTS
68 MOTOR TO SHAFT MOUNTED REDUCER W/DRIVE CHAIN
(DRIVE FOR LOT 67)
69 2004 WESTERN PNEUMATICS
42"X36" HIGH PRESSURE CHIP BLOWER W/150 HP MOTOR, MARKED PIPING
70 32"X45" CHIP FEEDER W/MOTOR TO SHAFT MOUNTED
REDUCER, MARKED PIPING
71 APPROX 42' 2-STRAND H78 W/FLITES CONVEYOR, H&T
DRUMS, STEEL TROUGH, SUPPORTS
72 MOTOR TO REDUCER (NO DATA) W/DRIVE CHAIN (DRIVE
FOR LOT 71)
73 LOT, MARKED ELECTRICS & SUPPLIES W/WOOD BUILDING
74 LOT, (2) APPROX 30-UNIT HYDRAULIC OPERATED CHIP
BINS W/20' GATES, CROSS TOP CONVEYOR HYDRAULIC UNIT, ELECTRICS (NO PIPING)
75 WIG WAG
SINGLE HOOD RAIL CAR LOADER W/RAIL WINCH, ELECTRICS (NO PIPING)
76 LOT, 10" BLOWPIPE FROM BLOWER LOT 62 TO BINS &
WIG WAG W/DIVERTER
77 APPROX 60' RAIL CAR TARPING STATION
78 DISMANTLED TRAILER LOADER W/CABLE WINCH &
GEARHEAD MOTOR (UNKNOW CAPACITY)
80 LOT, WIRE & CONDUIT FROM DOWNSIDE OF TRANSFORMER
LOT 81 THROUGHOUT MILL EQUIPMENT (DOES NOT INCLUDE ANY WIRE INSIDE ELECTRICS OR MOTORS SOLD, PLEASE CONSULT AUCTION SITE REP PRIOR TO BIDDING)
81 SUNBELT
1,500/1,680 KVA PAD MOUNTED TRANSFORMER, HIGH VOLTAGE 13,200V DELTA, LOW VOLTAGE 2,400Y/1,385V (DOES NOT INCLUDE WIRE SOLD IN LOT 80)
83 LOT, H-CHAIN ON THIS PALLET
84 LOT, BOX CHAIN ON THIS PALLET
85 LOT, ASSORTED MILL PARTS ON THIS PALLET
86 LOT, ASSORTED SPROCKETS ON THIS PALLET
87 LOT, ASSORTED BEARINGS IN THIS CRATE
88 LOT, ASSORTED SPROCKETS IN THIS CRATE
89 LOT, ASSORTED MILL PARTS ON THIS PALLET
90 LOT, ASSORTED CHIP SCREENS ON THIS PALLET (FITS
LOTS 60 & 61)
91 LOT, ASSORTED MILL CHAIN IN BOXES ON THIS PALLET
92 LOT, ASSORTED HYDRAULIC MOTORS & MILL PARTS ON
THIS PALLET
93 LOT, STAFFA HYDRAULIC DRIVE W/ASSORTED MARKED
MILL PARTS ON THESE PALLETS
94 LOT, ASSORTED SIZE CHEVRON BELTING
95 LOT, ASSORTED BELTING W/CURTAIN MATERIAL
96 NORTH AMERICAN
75 HP/1,780 RPM/365T FRAME AC MOTOR
97 BALDOR
30 HP/1,770 RPM AC MOTOR
101 1988 KOMATSU WA600-1L
RUBBER TIRE LOG LOADER W/FORKS, TURBO DIESEL ENGINE, 65.35-33 TIRES, HOUR METER READS: 35,535 (RUNS, NEEDS NEW INJECTION PUMP) SERIAL NUMBER: 35534
102 1996 KOMATSU WA500-1L
RUBBER TIRE LOG LOADER W/MEDFORD FORKS (BLOWN ENGINE), 29.5-25 TIRES, HOUR METER READS: N/A SERIAL NUMBER: A60224
103 CAT D6
CRAWLER TRACTOR, CAT TURBO DIESEL ENGINE, 12' PUSH BLADE, 20" SINGLE GROUSER TRACKS, HYSTER D6D WINCH, HOUR METER READS: N/A SERIAL NUMBER: 10K809
104 1980 INTERNATIONAL 1800
SINGLE AXLE FUEL TRUCK, DIESEL ENGINE, MANUAL TRANSMISSION, APPROX. 2,000 GALLON TANK , ODOMETER READS: N/A (CONDITION UNKNOWN, (1) BLOWN TRANSFER PUMP) SERIAL NUMBER: AA185KHA15246
106 MEDFORD BK2234
SET OF LOG FORKS (FITS 966F) SERIAL NUMBER: F93-51
107 SET OF LOG FORKS, APPROX 20" C.C. TOP PIN & 38"
BOTTOM PINS, 9' OVERALL WIDTH
108 APPROX 9' GRAB BUCKET
109 APPROX 12'W SLIP ON SNOW PLOW, APPROX 8' C.C.
FORK POCKETS
112 FIRESTONE
65/35 TIRE, 30 PLY RATING
113 ADVANTAGE
23.5/25 TIRE
114 GOODYEAR
23.5/25 TIRE
115 BRIDGESTONE
29.5/25 TIRE W/RIM
116 LOT, (2) 29.5/25 TIRES
117 LOT, (2) 29.5/25 TIRES
121A PETERSON DDC-5000G
PARTS MACHINE (WAS IN A FIRE) W/PRECISION HUSKY 6623 CHIPPER MOUNTED ON PARTIAL FRAME SERIAL NUMBER: C-2634
121B LOT, HYDRAULIC OPERATED LOADER ARM W/CYLINDERS,
CAB & MARKED CONTROLS
122 CAT 3412
TURBO DIESEL ENGINE (WAS IN A FIRE, NEEDS TO BE INSPECTED THOROUGHLY)
123 FEED ROLL HOOD W/52" SEMI-SPIKED FEED ROLL (FITS
PETERSON DDC-500)
126 FEED ROLL HOOD
127 44" FEED ROLL
128 52" SPIKED FEED ROLL
129 FLAIL UPPER HOUSING COVER
130 FLAIL UPPER HOUSING COVER
131 LOT, (2) CENTRI PRE-CLEANERS
133 APPROX 98" DIA X 122" HIGH STEEL TANK W/CONE TOP,
INSPECTION PLATE & LIFTING EYES
134 CUSTOM BUILT APPROX 48"X32' PORTABLE LOADING
CONVEYOR, SINGLE AXLE TRAILER MOUNTED, HYDRAULIC DRIVEN (NOT TITLED, YARD USE ONLY. HYDRAULIC PUMP SOLD SEPARATELY AT LOT 135)
135 CUSTOM BUILT SINGLE AXLE TRAILER MOUNTED PTO
DRIVEN HYDRAULIC PUMP (NOT TITLED, YARD USE ONLY. USED TO POWER LOT 134)
136 APPROX 24' SECTION OF 36" WIDE BELT TROUGHING
FRAME W/(3) HOODS
137 APPROX 15' SECTION OF 36" WIDE BELT TROUGHING
FRAME
138 APPROX 30"X13' TROUGHING ROLL BELT CONVEYOR
W/BALDOR SUPER E 10 HP/1,760 RPM MOTOR TO SHAFT MOUNTED REDUCER (SPARE BELT & MOTOR SOLD SEPARATELY)
139 LOT, 36" BELTING
140 RELIANCE
20 HP/1,755 RPM MOTOR
141 LOT, APPROX 48" TROUGHING ROLLS ON THIS PALLET
142 LOT, APPROX 48" TROUGHING ROLLS ON THIS PALLET
143 LOT, (2) APPROX 42" TROUGHING ROLLS
144 LOT, ASSORTED MARKED TROUGHING ROLLS
145 2-ARM AIR OPERATED LOG KICKER
146 2-ARM AIR OPERATED LOG KICKER
147 APPROX 21' 3-STRAND 6"X11-1/2" BOX CHAIN
CONVEYOR, S-DRIVE, STEEL TROUGH & RETURN (NO DRIVE MOTOR)
148 APPROX 17' SECTION OF 36" WIDE BELT TROUGHING
FRAME W/(2) HOODS)
149 FLARE
APPROX 18"X21' SECTION OF CONVEYOR TROUGHING
150 APPROX 26"X23' ROLLCASE
151 APPROX 30"X49' CHEVRON BELT CONVEYOR W/BELT TAKE
UP & MCGUIRE 10 HP/20:1 RATIO REDUCER
152 APPROX 36"X48' BELT CONVEYOR W/10 HP MOTOR TO
SHAFT MOUNTED REDUCER
155 APPROX 8'W X 18'L STEEL FRAME LOADING RAMP
W/FOLDING GATES AT EACH END (NO WOOD DECK)