DEI Welding and Fabricating Retirement Liquidation
DEI Welding and Fabricating Retirement Liquidation
John M. Hess Auction Service, Inc. | Indiana, PA 15701
Date(s) :  8/15/2024 - 9/17/2024
Buyer Premium :  15% under $9,999, 10% over $10,000 ea.


Online Only Auction
Auction will begin closing with Lot #1 at 5:PM on Tuesday, Sept. 17th. This is an online only auction.
After 35+ years in the business DEI Welding and Fabricating is retiring. This auction features an extensive amount of quality equipment and tools. 2013 Chevy 3500 Duramax, 2016 Chevy 2500, 2018 Forest River 18' Welding Trailer, 2015 28' BWise Gooseneck Trailer, 2007 Yale Veracitor 80VX Forklift, 1977 Clark C500-560 Forklift. 6' South Bend Lathe, Bridgeport Milling Machine, MIG Welders, TIG Welders, Stick Welder, Spot Welders, Plasma Cutters, Cutting Equipment, Assortment of Tooling, Hydraulic Presses, Jib Cranes, Very Large Amount of Welding Leads. Hilti Core Drill, Magnetic Drill, Riveters, Electrodes and Mig Wire, Grinders, Rivetters, Welding Tables, Bench Vises, Tool Boxes, Hardware Organizers, Heavy Duty Shop Tables, 2500 Gallons of Used Oil. Hand and Power Tools including Snap-on, Craftsman, Williams, Etc.
1 BUYER'S NOTE
Buyer is responsible for bringing appropriate tools, loading equipment, trailer(s) and manual labor for removal of any items purchased. Tow motor will be available for loading on scheduled pick-up days, but buyer will be responsible for any disassembly.
1a 2013 Chevrolet 3500 4X4 Diesel Duramax
VIN# 1GB4KZC87DF189724. 107,919 miles. 6.6L Duramax diesel with Allison automatic transmission. Moritz 9 ft. aluminum flatbed with gooseneck hitch. Dual rear wheels. Includes AC, cruise control, power windows and factory Power Take-off. Current PA inspection. Good running condition.
2 2016 Chevy Silverado 2500HD 4X4
VIN# 1GC1KVEG7GF287474. 184,230 miles. 6.0L gas engine. Automatic transmission with 4WD, AC, power windows and doors. 6.6 ft. bed with gooseneck hitch. Current PA inspection. Good running condition.
3 2018 Forest River 18' Welding Trailer
102'' W. 9,990 GVW. Includes Hobart 4030G welder, gasoline powered with 2,696 hours. Ingersoll Rand 30 gallon air compressor, serial #CBV420686. Plumbed and in good working order..
4 2015 28' BWise Gooseneck Trailer
VIN# 58CB3EH28FC003721. 16,800 GVW. Has 8 ft. extension over gooseneck. Includes extension brackets. Hydraulic landing gear and electric over hydraulic disc brakes. Surface rust present.
5 Lincoln 305G Welder/Generator
Code # 12203. Missing leads. Includes gang box with steel fabricated pallet. Good running condition.
6 2007 Yale Veracitor 80VX Forklift
Model # GLC080VXNGSV2084. Serial # E818V01869E. 7,397 hours. 7800 lb. capacity, 2-stage mast, hydraulic forks, 42" carriage with fork positioner. LP engine, includes bottle. Good running condition. BUYER'S NOTE: Will NOT be available for pick-up until 7-10 days after sale closes. Please contact auction house to schedule pick-up time.
7 1977 Clark C500-560 Forklift
Serial# 355-1511-3806. 5,350 lb. capacity. 5,887 hours. 3 stage mast, 187" lift height with new forks. LP engine. Includes bottle. Good running condition.
8 South Bend 6' Lathe
14-1/2'' swing. Includes 3-jaw chuck. Does NOT include tool post, collets or centers. 220V, 3-phase electric. Includes 12" faceplate. Good running order.
9 10" 4-Jaw Chuck
Normal signs of use.
10 C5 Collet System
Expected signs of use.
11 Aloris BXA2 Tool Post
Normal signs of use.
12 (4) Live Centers
Normal signs of use.
13 Bridgeport Milling Machine
9" X 36" table. 230V, 3-phase electric. Includes assorted collets and chucks. Good working condition.
14 Ingersoll Rand 80-Gallon Air Compressor
5HP, 2-stage. Includes automatic drain. Good working condition.
15 Piranha P3-50 Ton Ironworker
Serial # P3-606. 230V, 3-phase electric. 50 ton capacity. Good working condition.
15a Steel Crafted Feed Table
96'' L x 18'' W x 44'' H. Normal use. BUYER'S NOTE: Does NOT include contents on table shown in photos. VERY HEAVY CONSTRUCTION. Bring appropriate labor, equipment and tools for removal. Auction company staff will NOT be providing help.
16 (11) Ironworker Punches & Dies
Includes 1 1/16" through 17/32".
17 (10) Ironworker Punches & Dies
Includes 5/8'' through 1/8".
18 (10) Obround Ironworker Punches & Dies
Includes 3/8" x 1/2", 3/8" x 3/4", 3/8" x 1", 1/2'' x 3/4", 7/16" x 1", 1/2'' x 1'', 5/8'' x 1'', 7/8" x 1", 7/8" x 1-1/8", 7/16" hex punch & die. Includes 3 alignment keys.
19 7-3/4" 3-Jaw Chuck
Missing key. New condition.
20 8" Press Brake Punch for Ironworker
Includes 8" press brake die block.
21 Punch Die Block
Normal signs of use.
22 Punch and Stripper
Normal signs of use.
23 (2) 14-3/4" Replacement Shear Blades
24 (3) 4" Coper Notcher Blades
New condition.
25 4" Coper Notcher Knife
Good used condition.
26 1-1/4" Morris Taper Drill Bit
No. 3 shank. New condition.
27 1-1/4" Morris Taper Drill Bit
No. 3 shank. New condition.
28 End Mills
3/16" - 3/4". Normal signs of use.
29 1/2" Lathe Tooling
30 3/4" Carbide Tip Lathe Tool
Good condition.
31 Tool Post with Tool Holders
Normal signs of use.
32 1" Lathe Tool
New condition.
33 (5) 1-5/32", 1/2 Inch Shank Drills
New condition.
34 (2) 1" Floating Die Heads
New condition.
35 Keyless Chuck
Model # JT3. Normal signs of use.
36 (6) 5/8" End Mills
New condition.
37 Assorted End Mills
Resharpened. Good condition.
38 Crane Scale
Normal signs of use.
39 (2) Jacobs Chucks
Normal wear.
40 Hydraulic Crimping Tool
Normal signs of use.
41 Starrett 1" Dial Indicator
Good appearing condition.
42 Starrett 1" Dial Indicator
Good appearing condition.
43 Starrett Dial Caliper
Good appearing condition
44 6" 3-Jaw Chuck
Expected signs of use.
45 Minuteman Broach
Includes 1/8" and 3/16" broaches.
46 Hold Down Clamp Set
Unknown if complete. Normal wear.
47 3-Ton Plate Dawg
Normal signs of use.
48 1/2-Ton Plate Dawg
Normal signs of use.
49 Pro Tram System
Normal wear.
50 Bridgeport 6" Milling Vise
Normal signs of use.
51 STS 6" Milling Vise
Normal wear and use.
52 Miller Coolmate 3
#043007. Serial LF224991. Good working condition.
53 Lincoln Aspect 375 Tig Welder
Cope# 12558. Serial # U1170607999. Includes torches, stingers, leads with bottle and fabricated cart.
54 All-Fab 1500 Weld Positioner
Model # 1508, Serial # 607480E. 24" indexing table.
55 Lincoln Square Wave Tig Welder 350
Serial # AC831479, Cope# 9492. Missing leads.
56 42" Airmaster Fan
Good working order. Normal signs of use.
57 5-Gallon Hydraulic Reservoir
Good working order. Normal signs of use.
58 Rock River 48" Gang Box
48'' L x 24'' D x 28'' H. Normal wear and use.
59 Rock River 48" Gang Box
48'' L x 24'' D x 28'' H. Normal wear and use.
60 Rock River 48" Gang Box
48'' L x 24'' D x 28'' H. Normal wear and use.
61 Hypertherm Model 1650 Plasma Cutter
Normal signs of use. Good working condition.
62 Harris Cutting Torch
Includes bottles and cart.
63 Steel Bander
64 Lincoln Miniflex Fume Extractor
Serial # HO171410226. 220V, single phase electric. Good working order.
65 (2) Fabricated Work Stands
42'' L x 28'' H. Good appearing condition.
66 125 Cu. Ft. Argon Bottle
Believed to be full.
67 125 Cu. Ft. Mixed Gas Bottle
Believed to be full.
68 Black Bull Tubing Bender
Ranging 3/4'' - 2-3/4'' dies.
69 Ridgid 300 Pipe Threader
Good working order. Normal signs of use. Missing dies.
70 Pipe Vise
1/8" - 6" capacity. Normal signs of use.
71 U.S. General Gas Powered Air Compressor
Good working condition. Normal signs of use and wear.
72 Harris Cutting Torch
Includes bottles, gauges and cart.
73 Electro-Arc Metal Disintegrator
Model # 2DBQT, Serial # 9221. 220V, single phase, 10 KVA. Has auto-feed.
74 Lincoln LN-7 Wire Feeder
Serial # U1960401317. Code# 9928.
75 Lincoln Idealarc DC-400 Welder
Serial # AC-777696. Code # 9200MSP. 230/460V, 3 phase electric. Only includes ground lead.
76 Miller Gold Star 300SS Welder
Stock # 902288-02-7. Serial # KC 280866. 200/230/460V, 3 phase electric. Includes leads. Missing bottle.
77 Miller Gold Star 300 SS Welder
Stock # 902288-02-7. Serial # KC280869. 200/230/460V, 3 phase electric. Includes leads. Missing bottle.
78 Lincoln Power Wave Welder
Model# C-300. Serial # U1120811347. Code# 11672. 208/575V, single/3 phase. Includes leads and bottle.
79 Lincoln Power Wave Welder
Model # C-300, Serial # U1110107865. Code# 11672. 208/575V, single/3 phase electric. Includes leads, bottle and push-pull gun.
80 ESAB Mig 410 welder
Model # 003-225-0255. 230/460V, 3 phase electric. Includes wire feeder.
81 Lincoln Idealarc SP200 Welder
Model # SP-200. Serial # AC-627366. Code # 9028. 208/230V, single phase electric. Includes wire feeder.
82 Kalamazoo Band Saw
Model 9AW. Includes pneumatic feed. 3/4" x 10' x 10-1/2".
83 Fabricated Cart
23'' x 26 1/2''. Good appearing condition.
84 8' Feed Table
Adjustable height. 15'' W.
85 20-Ton Bottle Jack
Normal signs of use.
86 13" Indexing Table
Expected signs of use.
87 Hold-Down Clamp Set
Unknown if complete. Normal signs of use.
88 Manley 60-Ton Hydraulic Press
Serial # 846. 73'' H x 66'' W. Includes 7 ton arbor press.
89 AAF Fume Extractor
Model # WE1809. Serial # SA060373. 220V, single phase electric. 1-1/2 HP.
89a VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
89b VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
89c VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
89d VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
89e VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
89f VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
89g VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
89h VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
89i VariCel Air Filters for Fume Extractor
Size 24" x 24" x 12".
90 Craftsman 12" Band Saw
1-1/8 HP. Good working order.
91 Troy Bilt 2700 PSI Power Washer
Good working order.
92 JD Model 54 Hydraulic Pipe Bender
Missing dies. Good working condition.
93 JD Model 54 Replacement Cylinder
Good condition.
94 1-1/2" Pipe Die with 5-1/2" Center Line Radius
95 2" Pipe Die with 5-1/2" Center Line Radius
96 2" Tubing Die with 6" Center Line Radius
97 1-1/4" Pipe Die with 6-1/2" Center Line Radius
98 1/2" Tubing Die with 3" Center Line Radius
99 3/4" Pipe Die with 3" Center Line Radius
100 7/8" Tubing Die with 4" Center Line Radius
101 3/4" Tubing Die with 3-1/2" Center Line Radius
102 1-1/4" Pipe Die with 4-1/2" Center Line Radius
103 3/4" Tubing Die with 4" Center Line Radius
104 3/4" Pipe Die with 3" Center Line Radius
105 1" Tubing Die with 3" Center Line Radius
106 Fabricated Die Cart
56'' H x 48'' L. BUYER'S NOTE: Does NOT include dies shown in photos.
107 Phoenix Rod Oven
23 1/2'' L x 22'' D. Good appearing condition.
108 60-Gallon Compressor Tank
Normal wear.
109 Fabricated Work Platform
70 1/2'' L x 35'' W. Overall good.
110 Cast Metal Stove
27'' H x 27'' L. Surface rust and wear.
111 Self-Dumping Hopper
39'' W x 62'' L. Areas of separation, dents and wear.
112 U.S. General Tool Chest
56 1/2'' L x 38'' H. Does NOT have castor wheels.
113 Fork Mounted Drum Handler
1500 pound capacity. Normal wear.
114 Fabricated Jib Boom
Unknown capacity. Normal wear.
115 (2) Fabricated 5' Fork Extensions
Normal use.
116 Fabricated Adjustable Spreader
120'' L. Normal signs of use.
117 8' Fabricated Spreader
Expected signs of use.
118 Gorilla Ladder
375 pound load capacity. Good appearing condition.
119 Werner 21' Aluminum Ladder
Good appearing condition.
120 Werner 6' Fiberglass Ladder
Good appearing condition.
121 Werner 4' Fiberglass Ladder
Good appearing condition.
122 Snap-On 3/8" Drive Flex Head Ratchet
13'' L. Normal wear.
123 Snap-On 1/2" Drive Ratchet
10'' L. Normal wear.
124 Snap-On 20", 1/2" Drive Extension
Heavy surface rust.
125 Lexicon 1/4" Drive Torque Wrench
Model LX-181. Good condition.
126 Seal and Hose Clamp Kit
Good appearing condition.
127 Imported Bearing and Seal Driver Set
Good appearing condition.
128 Blue-Point Torx Socket Set
Normal signs of use.
129 Walton Tap Extractor Set
Good appearing condition.
130 Craftsman Metric Flare Nut Wrench Set
Good appearing condition.
131 Craftsman SAE Flare Nut Wrench Set
Good appearing condition.
132 Imported 1/4" Letter Stamps
Normal signs of use.
133 Imported Electronic Edge Finder
134 Ace 1/16" Number Stamp Set
Normal signs of use.
135 (2) Imported Digital Calipers with Micrometer
Surface rust and wear.
136 General Radius Gauge Set
Normal signs of use.
137 (6) Reamers
Normal use.
138 Craftsman 1/2" Drive Torque Wrench
Normal use.
139 Craftsman 3/8" Drive Torque Wrench
Normal use.
140 1/4" Letter Stamp Set
Normal signs of use.
141 CP Pneumatic Riveter
Normal wear.
142 R8 Morse Taper Adapter
New condition.
143 R8 End Mill Holder
3/4" I.D. New condition.
144 U.S. General 11 Drawer Tool Chest
56 1/2'' L x 42'' H. Missing keys.
145 Channellock 18 Inch Water Pump Pliers
Expected use.
146 (3) Welding Gas Regulators
Normal use.
147 Norton Sharpening Stone
New condition.
148 (3) Channel Lock Water Pump Pliers
12'' and 15''. Expected use.
149 Helicoils
150 Wright 1/2" Drive Torque Wrench
Model 4478. Good appearing condition.
151 (4) Morse Taper Drills
Includes two 11/16" and two 3/4". New condition.
152 Craftsman 1/2" Drive Hex Bit Sockets
Includes 9/16", 5/18", 14mm and 17mm. Good condition.
153 New Jacob's Chuck
154 Fly Cutter
New condition.
155 R8 Adaptor
1 1/4 I.B. New condition.
156 1-1/2" Shank Drill
New condition.
157 (2) 1-3/8" Shank Drills
New condition.
158 11/16" Morse Taper Drill
New condition.
159 1-1/8" Reamer
Good condition.
160 Imported Brake Caliper Tool
161 4-to-1 Torque Multiplier
Good appearing condition.
162 Hose Repair Kit
Good appearing condition.
163 Lang Gasket Punch
Normal use.
164 1-1/2" Shank Drill
New condition.
165 (2) 1-1/4" Taper Shank Counterbores
New condition.
166 1-3/8" Morse Taper Counterbore
New condition.
167 Files, Utility Knives, Air Fittings
168 Screwdrivers
Normal use.
169 Pneumatic Slag Hammer
Expected signs of use.
170 Pneumatic Slag Hammer
Expected signs of use.
171 Pneumatic Slag Hammer
Expected signs of use.
172 Assorted Taps
New and good condition.
173 Drill Bits
Assorted sizes and tapers. New and good condition.
174 11/16" Morse Taper Drill
New condition.
175 1" Morse Taper Drill
New condition.
176 (2) Morse Taper Adaptors
Good appearing condition.
177 (2) Morse Taper Tool Holders
178 Misc. Sockets
Includes Craftsman and other manuf.
179 Snap-On 1/2" Drive Ratchet with Assorted Sockets
Surface rust and wear.
180 Thread Insert Rivet Kit
Normal signs of use.
181 (Approx. 50') 220V Single Phase Extension Cord
Good appearing condition.
182 Helicoils
Assorted varieties.
183 (Approx. 25') 220V Single Phase Extension Cord
184 (50') 3/8" Air Line
185 Ingersoll Rand Diaphragm Pump
Used for coolant transfer. Includes 51'' H x 36'' L fabricated cart. Good working order.
186 Ingersoll Rand Diaphragm Pump
Good working order.
187 Electric 1/3 HP Transfer Pump
Good working order.
188 (2) Drill Indexes
Good appearing condition.
189 Counter Sinks
190 Eclipse Magnetic Base
191 (3) Tire Repair Kits
192 Hand Riveter
193 Vise Grips, Tin Snips, Wire Strippers
194 Lang Snap Ring Plier Set
195 Fabricated Material Rack
81 1/2'' H x 60'' L.
196 (7) Plastic Folding Saw Horses
Normal signs of use.
197 Plywood and OSB Remnants
198 (4) Heavy Duty C-Clamps
Ranging 5'' - 13''.
199 Snap-On Tool Chest
52'' H. Surface rust and wear.
200 U.S. General Tool Chest
33'' L x 42'' H. Paint fading and wear.
201 Wire Brushes
202 Hack Saw, Pipe Cutter, Pry Bars
Expected use.
203 Mallets and Hammers
204 Left Hand Drills
205 Imported R8 Collet Adaptors
3/16'' - 1 1/2''.
206 3/8" Drive Pneumatic Impact Gun
Normal signs of use.
207 Ball-Peen and Shaping Hammers
208 Pneumatic Sanders, Rotary Tool, Ratchet
Normal signs of use.
209 (2) 1/2" Drive Pneumatic Impact Guns
Expected wear and use.
210 (2) 12" Adjustable Wrenches
Includes Proto and Gear.
211 Williams SAE Combination Wrench Set
Expected signs of use.
212 Combination Wrenches
Normal surface rust and wear.
213 1-1/16" Morse Taper Drill
214 1-1/8" Morse Taper Reamer
215 15/16" Morse Taper Reamer
216 1-1/16" Morse Taper Drill
217 4600 Lb. Basket Sling
24''.
218 4600 Lb. Basket Sling
24''.
219 4600 Lb. Basket Sling
24''.
220 3/4" Drive Impact Gun
Normal wear and use.
221 5' Mesh Sling
Good condition.
222 5' Mesh Sling
Good condition.
223 3/32" Mild Steel Tig Rod
Approx. 10 lb. New condition.
224 Masonry Bits
3/4" - 3/8".
225 (Approx. 400') 14-Gauge Wire
226 (Approx. 400') 14-Gauge Wire
227 (Approx. 400') 14-Gauge Wire
228 (Approx. 400') 14-Gauge Wire
229 14 and 18 Gauge Wire with Hold-Down Clamps
230 Angle Plate, Easy Outs, Helicoils
231 Shank Drills
232 Steel Welding Table
77'' W x 138'' L x 38'' H with 1" D steel top. BUYER'S NOTE: Does NOT include contents on table shown in photos. VERY HEAVY CONSTRUCTION. Bring appropriate labor, equipment and tools for removal.
233 (Approx. 25') 3/8" Cam Lock Chain
234 (Approx. 10 Lbs.) 7018 1/8" Welding Rod
235 (Approx. 40 Lbs.) 7018 1/4" Welding Rod
236 (Approx. 15 Lbs.) 7018 1/4" Welding Rod
237 (Approx. 10 Lbs.) 3/32" 9018 Welding Rod
238 Bug-O Cutting Torch Trolley
Includes 8 ft. track extension.
239 Ridgid 2" Pipe Cutter
Good appearing condition.
240 Ridgid 2" Pipe Cutter
Good appearing condition.
241 Fein 4-1/2" Angle Grinder
Good appearing condition.
242 18" Magnetic Pick-Up Tool
Normal signs of use.
243 Fold-A-Jack
Lowest height, 32'' H with adjustable height.
244 K.N. Aronson Optical Lens
Model # IK-600C. Serial # 60186. 115V, single phase electric.
245 Fold-A-Jack
Adjustable height. Normal signs of use.
246 Fold-A-Jack
Adjustable height. Normal signs of use.
247 Fold-A-Jack
Adjustable height. Normal signs of use.
248 Pry Bars, Punches, Hex Keys
Normal wear.
249 (2) Shop Stools
29'' H. One showing burn marks and wear.
250 Chuck Key, Plastic Tool Box
251 Bolt and Pipe Cutter, Lug Wrenches, Brake Fluid
252 (2) Strong Hand Clamps
Model UM105P.
253 (2) Strong Hand Clamps
Model UM85.
254 (2) Strong Hand Clamps
Model UM125.
255 (2) Strong Hand Clamps
Model UM125P.
256 Strong Hand Clamp
Model UM205.
257 Strong Hand Clamp
Model UM125P.
258 (2) Real Gear Work Clamps
259 Cut-O-Matic
5' track. Unknown operation.
260 Black & Decker Workmate
29'' L. Normal wear.
261 Black & Decker Workmate
29'' L. Normal wear.
262 (8) Moving Pads
Some showing loss and wear.
263 6'' Drop Receiver
Expected use.
264 Tri-Ball Receiver
Good appearing condition.
265 (3) Receiver Hitches
3" and 4" drop. Heavy surface rust.
266 Delta 6" Belt Grinder
Normal use.
267 (5) Quarts of Aluminum Cleaner
268 HDEE Material
Assorted lengths and sizes.
269 (3) Framing Squares
270 Coping Jig
271 (4) LED Lights with Brackets
5'' sq. lights.
272 Extension Cords with Plug Ends
273 Waste Oil Can
19'' H. Expected wear.
274 Battery Charger and Motor Oil
275 250 Amp Battery Charger
Good appearing condition.
276 (4) Strong Hand Clamps
Largest, 15'' L.
277 Welding Vise Grips
Expected wear.
278 Lincoln LN-25
Serial # U1010409710, Code# 10558.
279 Imported 3/4-Ton Chain Hoist
Normal use.
280 Imported 1/4-Ton Chain Hoist
281 Hobart Hefty CV/CC
Spec. # 6898. Serial # 89WA04581.
282 Clevices
3/4 ton capacity.
283 Imported 1/2-Ton Chain Hoist
284 Imported 1" Drive Metric Socket Set
21mm - 40mm. Normal use.
285 (Approx. 20 Lbs.) 308 Welding Rod
286 Copper Coated Gouging Carbons
Assorted sizes.
287 Abrasive Wheels
4 1/2'' and 6''.
288 Electrodes
Assorted sizes and numbers.
289 4-1/2" Grinding and Wire Wheels
290 (2) Fein 4-1/2" Angle Grinders
Normal use.
291 Trailer Breakaway System, Hard Hat, Elec.
Supplies
292 Small Galvanized and Plastic Buckets
293 New Hardware
Includes nuts, washers, hooks, etc.
294 Headlok Screws, Toggle Bolts, Hardware
295 (4) Traffic Cones
296 New Hardware
Includes screws, bolts and washers.
297 Anchor Bolts
Large box. New condition.
298 Trailer Wiring Supplies
299 (33 Lbs.) Dual Shield 1/16" Welding Wire
New condition.
300 New Anchor Bolts
Mostly 1/2". Includes plastic storage tote/lid.
301 Welding Work Clamps
Includes plastic storage tote/lid.
302 Welding Gloves and Sleeves
303 Metric 1" Impact Sockets
26-38 mm. Normal use.
304 Mallets, Hammers, Pry Bar
305 (2) Hammer Wrenches
Largest, 1 7/8".
306 Imported 3/4" Drive SAE Sockets
1" - 1 5/16.
307 Hose Repair Kit, Chalk Line
308 (2) Pneumatic Die Grinders and Accessories
309 Hypertherm Powermax Plasma Cutter
Serial # 105104. 120/220V, single phase electric.
310 Assorted Clecos
311 (3) Cutting Torches with Gauges and Accessories
312 (3) 3/4" Carbide Cutters
313 Imported 1" Dial Caliper
Good working condition.
314 Lufkin 300' Tape
Good appearing condition.
315 2-3/4 Ton Hydraulic Floor Jack
316 1/2" and 1" Threaded Rod
317 Imported SAE Sockets
318 (3) Craftsman Ratchets
1/4", 3/8" and 1/2".
319 Snap-On 10", 1/2" Drive Extension
320 Imported Metric Sockets
Good condition.
321 Imported Impact Sockets
322 Craftsman SAE Wrenches
Largest, 1 1/4".
323 Cutting Torch Tips and Abrasive Wheels
Includes assorted MIG tips.
324 Craftsman 3/8" Drive Torx Sockets
325 Imported Metric Sockets, Extensions, Hex Sockets
Expected wear and use.
326 (3) Adjustable Spud Wrenches
327 Files, Impact Sockets, Socket Adaptors
328 Tin Snips, Pliers, Vice Grips
329 (2) 4-1/2" Angle Grinders
Expected signs of use.
330 Pliers and Tin Snips
331 Pipe and Adjustable Wrenches
6'' - 18''.
332 Measurement Tools and Level
333 Plumb Bob, Tape, Levels
334 4-1/2" and 6" Pneumatic Grinders
Imported manuf.
335 Protractors, Hex Keys, Level
336 Air Cat 3/4" Drive Pneumatic Impact Gun
337 Pneumatic Slag Pick
338 (2) Pneumatic Impact Guns
1/2" and 3/4" drive.
339 Scrapers, Punches, Hex Keys
340 DeWalt 20V Cordless Drill
Includes 2 batteries and charger. Good working order.
341 Craftsman Screwdrivers
342 3/8" x 8' Cable Swing
Expected use.
343 3/8" x 6' Cable Swing
Expected use.
344 3/8" x 4' Cable Swing
Expected use.
345 3/8" x 3' Cable Swing
Expected use.
346 Anvil with Tongs and Hammer
Anvil, 21'' L and mounted on stump.
347 Wire Remnants and Conduit
348 AA Batteries, Lightbulbs, Respirators
349 Paper Towels, Toilet Paper, Coffee Maker
350 Safety Harnesses, Ratchet Straps, etc.
351 Tire Pressure Gauges, Spray Cans
352 Starting Fluid, Tape, Measuring Tools, etc.
353 Fuses, Bungees, Level
354 Slings, Safety Harnesses, Respirator
355 Electrical Supplies
356 Hardware
357 Electrical Lights and Extension Cords
358 Welding Jacket and Strap
359 Organizer, Electrical Hardware
360 Adjustable Wrenches, Rope, Funnel
361 Choker Slings
362 Bungees, Lights, etc.
363 Hardware and Drill Bits
364 Compressed Gas Bottle
36'' H. Approx. 50% full.
365 Magnum 550 MIG Gun
366 (2) Harris Gas Gauges
Expected signs of use.
367 (2) 25' Extension Cords
368 Welding Sleeves and Gloves
369 (Approx. 25') Welding Lead
370 Electrical Connectors with Plastic Tool Box
371 (2) Tweco Welding Leads
Approx. 50 ft.
372 (2) Tweco Welding Leads
Approx. 50 ft.
373 Tweco Welding Lead
Approx. 50 ft.
374 (2) 15' Welding Leads
375 (2) 20' Ground Leads
376 R8 Fly Cutter with Tapered Adaptor
Good appearing condition.
376a Torch Hoses
Expected wear.
377 (25') 3/8" Air Hose
378 Gas Torch
379 (50') 1/4" PVC Hose
380 3/8" Air Line
381 (Approx. 50') 3/8" Air Line
382 (2) Swivel Patio Stools
28'' seat height. Staining and wear.
383 40-Compartment Steel Hardware Cabinet
34'' L x 24'' H. Includes hardware.
384 40-Compartment Steel Hardware Cabinet
34'' L x 24'' H. Includes hardware.
385 Fabricated Cabinet Stand
35'' L x 17'' W x 24'' H. Expected wear.
386 Fabricated Cabinet Stand
35'' L x 17'' W x 24'' H. Expected wear.
387 Fabricated Cabinet Stand
35'' L x 17'' W x 24'' H. Expected wear.
388 Fabricated Cabinet Stand
35'' L x 17'' W x 24'' H. Expected wear.
389 Fabricated Cabinet Stand
35'' L x 17'' W x 24'' H. Expected wear.
390 Fabricated Cabinet Stand
35'' L x 17'' W x 24'' H. Expected wear.
391 40-Compartment Steel Hardware Cabinet
33 1/2'' L x 23 1/2'' H. Includes hardware.
392 40-Compartment Steel Hardware Cabinet
33 1/2'' L x 23 1/2'' H. Includes hardware.
393 40-Compartment Steel Hardware Cabinet
33 1/2'' L x 23 1/2'' H. Includes hardware.
394 40-Compartment Steel Hardware Cabinet
33 1/2'' L x 23 1/2'' H. Includes hardware.
395 40-Compartment Steel Hardware Cabinet
33 1/2'' L x 23 1/2'' H. Includes hardware.
396 40-Compartment Steel Hardware Cabinet
33 1/2'' L x 23 1/2'' H. Includes hardware.
397 40-Compartment Steel Hardware Cabinet
33 1/2'' L x 23 1/2'' H. Includes hardware.
398 72-Compartment Steel Hardware Cabinet
42'' H x 34'' W. Includes hardware.
399 72-Compartment Steel Hardware Cabinet
42'' H x 34'' W. Includes hardware.
400 (4) Wheel Chocks
401 1-3/4" Blank Elbows
402 3/16" Chain
403 3/8 Grade 5 Bolts
1" and 1-1/2".
404 (Approx. 20') Ground Lead
405 1/4" Chain
406 5/8" Hex Head Bolts
407 3/8" Hex Head Bolts with Nuts and Washers
408 1-1/4" SCH 40 Pipe Fittings
409 4' Level with Rule
Normal signs of use.
410 Bungee Cords
Normal wear.
411 (5) 1" Ratchet Straps
Normal wear.
412 1" Ratchet Straps
Normal wear.
413 Carbon Steel Fasteners
New condition.
414 Hydraulic Grease Fittings
415 Automotive Mini-Fuses
416 Set Screws
417 O-Rings
418 Roll Pins
419 Cotter and Hitch Pins
420 (2) Electric Work Lights
421 Welding and Grinding Shields with Hard Hat
422 16-Gallon Shop Vac
423 100,000 BTU Reddy Heater
Normal wear.
424 Welding Rod
Assorted sizes and numbers.
425 1/2" Air Regulator
New condition.
426 (Approx. 75') 3/8" Air Line
427 2-Ton Engine Hoist
Good condition.
428 Ozark Trail Pop-Up Canopy
Good condition with staining to outside carrying bag.
429 Ozark Trail Pop-Up Canopy
Good condition with staining to outside carrying bag.
430 Portable Electric Boxes
Good appearing condition.
431 Oil Dry Rags
432 Torch Tips, Air Couplers, Torch Wrenches
433 Torch Tips, Precision Screwdrivers, Levels
434 Heli-Coil, Miniature Work Holders
435 Incomplete Morse Taper Drill Index
Good appearing condition.
436 (4) Incomplete Drill Indexes
437 Imported Pin Punch Set
438 Fowler 12" Dial Caliper
Good appearing condition.
439 Imported 12" Dial Caliper
Good appearing condition.
440 Incomplete Imported Drill Index
441 Assorted Taps, Chisels, Drips
442 Shop Vac Filters
New condition.
443 Brake Fluid Exchanger
Good condition.
444 Maddox Auto Body Hammers
Good appearing condition.
445 Nut Drivers
Normal use.
446 Hex Keys and Torx Sockets
447 Assorted Files
448 (2) Magnetic Grounds
449 Imported Metric and Standard Flare Nut Wrenches
450 Gasket Punches with Hex Keys
451 Sockets with Hex Keys and Drill Bits
452 Pliers and Wire Strippers
Includes snap ring pliers, vise grips, needle nose pliers, etc.
453 12 Inch Base Plate
454 Astro Gear Puller
Good appearing condition.
455 Task Force Tool Kit
Good appearing condition.
456 (Approx. 75') 3/8" Air Line
457 (Approx. 50') 250 VAC Extension Cord
458 Western WB101 Propane Torch
Expected wear.
459 Rubbermaid 5-Gallon Water Cooler
Will need cleaned.
460 Morse Taper and Shank Drills
461 Flaring Tool, Hacksaw, Air Line
462 Strap Wrench, Strikers, Distributor Wrench
463 Oil Filter Wrenches, Volt Meter, Hand Tools
464 Grinding Wheel, Pipe Fittings
465 Drill Bits, Hole Saws, Padlocks
466 (3) Rolling Stands
14'' rollers. Adjustable heights.
467 3/4" Drive Digital Torque Adaptor
Like new.
468 Craftsman 40 Piece Impact Socket Set
Normal signs of use.
469 (2) Sets of ATD 3/8" Drive Hex Sockets
470 Kobalt 1/4" Drive Socket Set
Metric and standard.
471 Williams 1/2" Drive SAE Socket Set
Normal use.
472 Gearwrench Metric Hex Sockets
473 Kobalt 3/8" Drive SAE Socket Set
474 Kobalt 1/4" Drive Socket Set
Normal wear.
475 Incomplete Snap-On SAE Box Wrenches
476 Kobalt 3/8" Drive Socket Set
Expected use.
477 Craftsman 14 Piece Metric Wrench Set
478 Kobalt 3/8" Drive Metric Universal Sockets
479 (3) Proto and Gear Wrench Adjustable Wrenches
Includes 12'' and 18''.
480 (3) Imported 12" Adjustable Wrenches
481 Imported Combination Wrenches, etc.
Includes altered adjustable wrenches.
482 (4) Large Size Combination Wrenches
Largest, 1 1/2''. Assorted manuf.
483 Craftsman Metric Wrench Set
Includes 22 - 25 and 30mm.
484 Spud Wrenches with Gear Puller
Expected use.
485 3/4" Drive Imported Ratchets
486 Imported Metric and Standard Universal Sockets
487 Kobalt SAE Universal Socket Set
Good appearing condition.
488 Imported Impact Sockets
Incomplete sets. Normal use.
489 Imported Impact Sockets
Incomplete sets. Normal use.
490 Pipe Coping Cutters
Assorted cutters with expected wear.
491 Pipe Coping Cutters
Assorted cutters with expected wear.
492 Video Inspection Camera
Good appearing condition.
493 Porta Power Accessories
Normal wear.
494 Porta Power Accessories
Normal wear.
495 (2) 220V 6' Extensions
496 Auto-Darkening Welding Helmet, Grinding Shields
497 Hitch Pins
498 Oil Waste Can
17'' H. Normal use.
499 1" Transfer Hose
500 Plastic Storage Tote/Lid and Electrical Supplies
501 (2) Plastic Electrical Panel Boxes
502 Exhaust Parts and Pipes
503 (Approx. 75') 240V Single Phase Cord
504 (Approx. 75') 240V Single Phase Cord
505 Craftsman Tool Box with Pneumatic Die Grinders
Includes sanding and abrasive discs.
506 First Aid Kit
507 Craftsman Tool Box
508 Miller Filtered Air Welding Hoods
Like new.
509 Miller Filtered Air Welding Hoods
Like new.
510 New Hon Lateral File Cabinet
57'' H x 36'' W.
511 Steel Floor Grate
29 1/4'' x 38''.
512 U.S. General Tool Cart
33 1/2'' L x 38'' H. Finish scratches and wear. Includes keys.
513 Oil Drain Pan
Missing plug.
514 Adjustable Height Work Stands and Parts
515 (3) Folding Wire Cages
32'' L x 24'' W x 21'' D.
516 (2) 220V Wire Remnants
517 Assorted TIG Wire with Fabricated Rack
Rack, 53'' H x 27'' W.
518 14" Roller Stand with Extra Base
519 (2) Adjustable Height Roller Stands
5'' rollers. Normal use.
520 (2) Ridgid Pipe Stands
521 (2) Ridgid Pipe Stands
522 2500 LB. Adjustable Height Stand
523 (2) Wilson Welding Screens
63 1/2'' L x 48'' H.
524 Plastic Tool Chest
34 1/2'' L x 21'' W. Normal use.
525 (Approx. 50 Ft.) 250V Extension Cord
526 (5) Welding Screens
72'' sq.
527 5" Abrasive Discs
528 (20 Ft.) 3/8" Chain with Double Hooks
New condition.
529 (20 Ft.) 3/8" Chain with Double Hooks
New condition.
530 (20 Ft.) 3/8" Chain with Double Hooks
Good used condition.
531 First Aid Kit, Bungee Cords
532 Metabo 4-1/2" Angle Grinder
Expected use.
533 Metabo 4-1/2" Angle Grinder
Expected use.
534 (40) 4-1/2" Flapper Wheels
New condition.
535 (20) 4-1/2" Flapper Wheels with Grinder Guards
536 18" Abrasive Belts
537 (4) 3" Castor Wheels
New condition.
538 Used Hole Saws
539 Chalk, Squares, Tape Measures
540 Pens and Markers
541 Measuring Wheel with 300' Tape Measure
542 Safety Lights, V Blocks, Marking Dye
543 (4) 12" Coil Springs
3 5/8'' D.
544 (70) 4-1/2" Flapper Wheels
New condition.
545 (80) 4-1/2" Flapper Wheels
New condition.
546 4-1/2" Sanding Wheels, 6" Grinding Wheels
Good condition.
547 Weldcraft TIG Torch
Expected signs of use.
548 Levels, Center Finders, Radius Markers
549 Transfer Punch Set
Expected use.
550 Transfer Punch Plug Set
Expected use.
551 Incomplete Transfer Punch Set
Ranging 3/8" - 1" D.
552 Drafting Tools, Calipers, Angle Finders
553 Squares and Chalk Lines
554 (6) 10" Vise Grips
Expected use.
555 (2) 10" Vise Grips
Expected use.
556 (4) 9" Vise Grips
Expected use.
557 (2) 15" Vise Grips
Expected use.
558 (4) 11" Vise Grips
Expected use.
559 6" Wire Wheels
560 7" Cutting Wheels
561 (20) 4-1/2" Aluminum Grinding Wheels
New condition.
562 Ingersoll Rand Die Grinder
New condition.
563 4-1/2" Grinding Wheels
564 4-1/2" Grinding and Sanding Wheels
565 Altered Vise Grips
566 Altered Vise Grips
567 (4) 4-1/2" Cutting Wheels
568 4-1/2" Grinding and Sanding Wheels
569 Grinder Wrenches and Lock Nuts
570 (6) Polifan Curve Wheels
New condition.
571 (Approx. 40) 4-1/2" Cutting Wheels
New condition.
572 Dynafile
New condition.
573 DeWalt Tungsten Grinder
574 Eastwood Surface Conditioner
Good appearing condition.
575 DeWalt 7" Grinder
Normal signs of use.
576 Metabo 7" Grinder
Expected signs of use.
577 (2) Makita 6" Grinders
Normal signs of use.
578 (2) Metabo 4-1/2" Angle Grinders
Normal signs of use.
579 Metabo 4-1/2" Angle Grinder
Normal signs of use.
580 (2) Metabo 4-1/2" Angle Grinders
Normal use.
581 (2) DeWalt 1/2" Drills
Normal use.
582 Milwaukee 9" Grinder
Expected use.
583 (2) Fein 4-1/2" Angle Grinders
Normal wear.
584 (2) Electric Die Grinders
585 Arcair Oxygen Lance
Includes assorted rods.
586 U.S. General Tool Cart
34'' L x 37 1/2'' H. Includes keys. Finish scratches and wear.
587 U.S. General Tool Cart
34'' L x 37 1/2'' H. Lock assembly removed with later fabricated base. Finish scratches and wear.
588 (2) 2500 LB. Adjustable Roller Stands
Expected use and wear.
589 (2) Tubing Benders
590 (18) 6" Flap Discs
New condition.
591 Fein Magnetic Drill Press
Model # KB52U. Serial # 72703109366. Good working condition.
592 Pipe Notcher
Normal signs of use.
593 Steel Welding Table with Bench Vise
48'' x 144''. BUYER'S NOTE: Does NOT include contents on table shown in photos. VERY HEAVY CONSTRUCTION. Bring appropriate labor, equipment and tools for removal.
594 (4) Cage Clamps
Ranging 3'' - 8''.
595 Grinding Wheel Dresser
596 Ridgid 461 Pipe Alignment Vise
597 Ridgid No. 464 Pipe Flange Clamp
598 Ridgid No. 462, 90 Degree Clamp
599 14-1/2'' Pipe Alignment Clamp
600 One Ton Beam Clamp
601 Ridgid No. 463, 90 Degree Clamp
602 Jewel Pipe Alignment Clamp
603 5-Ton Beam Clamp
604 Pallet Skidder
605 Vise Grips
606 Vise Grips
607 Hole Saws
607a (2) Imported Electric Shears
Good appearing condition.
607b 1/4" Spreader Chain
608 (20) 4-1/2" Flapper Wheels
609 Fein 4-1/2" Angle Grinder
New condition.
610 Makita 6" Angle Grinder
New condition.
611 Welding Clamps
612 Metabo 4-1/2" Angle Grinder
New condition.
613 6" Grinding and Cutting Wheels
614 Angle Clamp
615 Magnetic Angles
616 Transfer Punch Set
1/2'' and 1''.
617 (2) Transfer Punch Sets
One set is incomplete.
618 (3) Folding Wire Cages
32'' L x 24'' W x 21'' D.
619 (7) 4-1/2" Bristle Discs
New condition.
620 (2) Jib Crane Hinges
6 1/2'' L. New condition.
621 Abrasive Discs and Drums
New condition.
622 (30) 6" Flap Discs
New condition.
623 Grinding Shields with Welding Sleeves
Expected wear.
624 Lincoln Rod Oven
21'' H. Overall good.
625 Welding Leathers and Lenses
626 (2) Welding Hoods with Respirator
627 9" Grinding Wheels
628 Assorted 3/8" Chain
629 Baldor 5HP Pedestal Grinder
Model #1401W. Serial # 667. 3-phase electric. Good working condition.
629a 50' Torch Hose
630 Werner 4' Step Ladder
Normal signs of use.
631 Werner 6' Step Ladder
Normal use.
632 Hand Tapper
13'' H. Missing bushings.
633 MIG Gun Liners
Assorted sizes.
634 Tweco MIG Gun Parts
635 Welding and Work Gloves
636 (4) Replacement Urethane Strippers
637 Pittsburgh Tubing Roller
New appearing condition.
638 (2) Electric Work Lights
Normal signs of use.
639 Slag Pick with Vice Grips and Galvanized Bucket
Expected wear.
640 (Approx. 30 Lbs.) 7018 Welding Rod
641 Tweco 50 Ft. Welding Lead
Normal signs of use.
642 Tweco 50' Welding Lead
Normal signs of use.
643 Tweco 50' Welding Lead
Normal signs of use.
644 Tweco 50' Welding Lead
Normal signs of use.
645 Tweco 50' Welding Lead
Normal signs of use.
646 Tweco 50' Welding Lead
Normal signs of use.
647 Tweco 50' Welding Lead
Normal signs of use.
648 Tweco 50' Welding Lead
Normal signs of use.
649 Tweco 50' Welding Lead
Normal signs of use.
650 Tweco 50' Welding Lead
Normal signs of use.
651 3/8" X 50' Air Hose
New condition.
652 Tweco 10' Grounding Clamp
653 Tweco 10' Welding Lead
654 Tweco 5' Grounding Lead
655 Tweco 25' Welding Lead
656 Esab 15' MIG Gun Lead
657 Tool Bag with 4-1/2" Grinding Wheels
658 Hardware Organizer with Conduit Boxes
659 Pneumatic Fluid Bleeder
21'' H. Good appearing condition.
660 Magnetic Pick-Up
11'' L. Unknown capacity.
661 Tweco 50' Welding Lead
Normal use.
662 (2) 25' Heavy Duty Extension Cords
Normal use.
663 DeWalt Cordless Work Light
Good working condition. Includes 1 battery. Missing charger.
664 Dye Penetrant Kit
Normal use.
665 Taps and Dies with Taper Adaptors
666 1-1/2" Drill Bit with 3/4" Shank
667 82 Degree Countersink with 3/4" Shank
Normal signs of use.
668 100 Degree Countersink with 3/4" Shank
Normal use.
669 1-1/8" Morse Taper Drill
New condition.
670 1-1/4" Drill Bit with 1/2" Shank
New condition.
671 1-5/32", 1/2" Shank Drill Bit
Has wear on shank.
672 100 Degree 1-1/2" Countersink with 1/2" Shank
673 1-1/8" Morse Taper Drill
New condition.
674 Jacob's Chucks, Drill Bits, Parallel Blocks
675 High Speed Tooling with Shank Drills
676 TIG Gun Parts
677 TIG Gun Parts
678 Craftsman 24" Pry Bar
Normal use.
679 Weld Test Plugs
680 (Approx. 50 Ft.) 5/8" Air Line
681 (4) 1" Diameter Countersinks with 1/2" Shanks
682 (2) 8" Pipe Stand Clamps
Does NOT include stands. Good appearing condition.
683 Simplex 10,000 Lb. Hydraulic Cylinder with Ram
Normal wear and use.
684 (5) 1-1/4" Ratchet Straps
Normal use.
685 Air Arc Lead
686 (9) 1" Chop Saw Wheels
New condition.
687 (Approx. 25') 3/8" Air Line
688 Lincoln Push-Pull Gun
689 Tweco Style Flex Head Gun
690 Lincoln Magnum 300 MIG Gun
691 Python 12' Push-Pull Gun
692 Esab 12' 400 Amp MIG Gun
693 Lincoln Magnum Pro 1752 MIG Gun
694 Harris Regulator
New condition.
695 Victor Cutting Torch
Good appearing condition.
696 Gas Regulators with Torch Body
Good appearing condition.
697 Kobalt Gravity Feed Spray Gun
Normal use.
698 Craftsman 3" Drill Press Vise
Normal signs of use.
699 3" Drill Press Vise
Normal signs of use.
700 Propane Torch with (2) 16 Oz. Bottles
701 Pneumatic Chisels
Normal wear and use.
702 Milwaukee 8" Metal Cutting Saw
703 Plasma Cutting Tips and Parts
704 Pneumatic Rivet Gun with Rivets
Good appearing condition.
705 Esab MIG Gun Parts
706 Rubber Edge Trim
707 Band Saw Blades with Spotcheck
708 Assorted Plastic Strapping Clips
709 Valley Tweco Style MIG Gun
710 Lincoln Magnum 200 MIG Gun
711 Valley Tweco Style MIG Gun with Flex Head
712 25' Extension Cord
Normal use.
713 (2) Boxes of Rubber Roofing Sealing Tape
714 (2) Gallons of Liquid Plastic
715 Work Gloves
716 6' X 9" Band Saw Blades
717 1/4 HP Blower Motor, Diaphragm Rebuild Kit, etc.
Includes insulation.
718 Torch Hose
719 Trowels and Floats
720 (Approx. 50') 220V Extension Cord
721 (4) Sections of Clear PVC Hose
60'' L.
722 (9) 10' X 10-1/2" Band Saw Blades
723 Mechanized MIG Gun
724 8" Propane Heater Head
Normal use.
725 Tweco MIG Gun Tips
726 Plasma Cutting Guide
Good appearing condition.
727 OTC Bearing Puller Set
728 DeWalt Right Angle Drill
729 DeWalt 1/2" Drill
730 2-Ton Beam Clamp
731 DeWalt Rotary Hammer
732 DeWalt Reciprocating Saw
733 Masonry Floats
734 Lincoln Push-Pull Gun Parts
735 MIG Gun Tips and Parts
736 Large Plastic Tool Box
32'' L. Normal use.
737 Plastic Tool Chest on Wheels
24'' L. Expected wear.
738 Empire Rotary Laser
739 Pneumatic Scraper
740 Garden Tools
Includes rakes, shovels and post hole digger.
741 Craftsman 17" Drill Press
68'' H. Normal signs of use.
742 (2) 48" Barn Jacks
743 Werner 4' Podium Ladder
744 (9) Partial Spools of Weld Wire
Includes Lincoln 4043, Select Arc 4045, Ultra Core .045, 1/16" Lincoln Core.
745 (20 Lbs.) of .045 Flux Core Welding Wire
New condition.
746 (4) 10' X 10-1/2" Saw Blades
New condition.
747 Mag Mate Welding Ground
748 Lincoln Super Glaze .035 Weld Wire
749 Lincoln Electrodes
Includes LH-D80, 308L, Fleetweld 5P. Approx. 25 lbs. overall
750 (Approx. 20 Lbs.) Esab 3/32" Welding Rod
Includes 7018 and 9018.
751 (Approx. 30 Lbs.) of 718, 3/32" Welding Rod
752 (Approx. 25 Lbs.) Esab.316L, 3/32" Welding Rod
753 (Approx. 20 Lbs.) 309L, 3/32" Weld Rod
754 Welding Electrodes
Approx. 75 lbs. Assorted manuf.
755 Assorted Gouging Carbons
756 (60 Lbs.) of .045 Select Arc Welding Wire
757 (10 Lbs.) of 308L, .025 Welding Wire
New condition.
758 (11 Lbs.) of L-56, .030 Welding Wire
759 (Approx. 25 Lbs.) Innershield 211/MP Weld Wire
Includes .035" and .025" D.
760 (Approx. 40 Lbs.) Assorted Welding Wire
761 (4) Partial Rolls of Select Shield Welding Wire
762 Pipe Guides
763 Gouging Carbons
764 (Approx. 100 Lbs.) Assorted Electrodes
Includes 6010, 308 and other sizes.
765 (3) 25 Lb. Spools of FC308L Welding Wire
.045" D.
766 (4) 25 Lb. Spools of Dual Shield 1/16" Weld Wire
767 (20 Lbs.) of 4043 Aluminum MIG Wire
3/64" D.
768 (4) Spools of Stainless Steel Welding Wire
.045" and 1/16" D.
769 (5) 25 Lbs. Spools of Lincore Hard Basing Wire
770 (6) 25 Lb. Spools of Assorted Welding Wire
771 (6) 25 Lb. Spools of Assorted Welding Wire
772 (6) 25 Lb. Spools of Assorted Welding Wire
773 (6) 25 Lb. Spools of Assorted Welding Wire
774 Porter Cable Portaband with Assorted Blades
775 Imported Porta Power
776 Bungee Cords and Tarps
777 Approx. 400 Ft. Welding Hose
778 Imported 1" Drive Impact Gun
779 Porta Power Cylinder
780 (2) Partial Rolls of 18" Shrink Wrap
781 60 Lbs. of Anchor Cement
782 (2) 40" Strong Hand Clamps
783 Hydraulic Treadle Pump
784 (2) Hydraulic Cylinders with Rams
785 Enerpac Hydraulic Cylinder
786 Allegro Air Delivery Fan
34'' L. Good appearing condition.
787 Magnum Airless Paint Sprayer
788 Rod Oven
20'' L.
789 DeWalt 20V Tripod Light
Missing battery and charger.
790 Tool Bag with Belt and Hacksaw
791 Fein Magnetic Drill
Model JCM312U. Serial # 72703812360.
792 8" Bench Grinder
Normal use and wear.
793 Husky Halogen Work Light
Expected use and wear.
794 (5) Bar Clamps
Ranging 44" - 68''.
795 (6) Irwin Bar Clamps
Ranging 48" - 68''.
796 (4) 1/2" Cable Slings
797 (2) 20V Cable Remnants
798 Transit Rule with Stand
799 Werner 20' Fiberglass Extension Ladder
800 Werner 10' Step Ladder
801 (2) DeWalt Cordless Drills with 3 Tool Bags
Includes 1 battery and 1 charger. Expected wear.
802 Imported 1" Drive SAE Socket Set
1" - 2".
803 Imported 3/4" Drive Impact Socket Set
5/16" - 1".
804 DeWalt 1/2" Drive Electric Impact Gun
805 6" Disc and Belt Sander
Normal wear.
806 Porter Cable 7-1/4" Table Saw
Good appearing condition.
807 Cutting Torch with 2 Hydraulic Cylinders
808 35-Ton Beam Punch
809 Electric Positioner
5" plate. Normal use and wear.
810 DeWalt Electric Nibbler
Good appearing condition.
811 Welding Hold-Down Clamps with Filters
812 Master 75,000 BTU Portable Heater
813 Gas and Air Regulators
814 C-Punch
Expected use and wear. Unknown if complete.
815 2-1/4 HP Router
816 Ball Valves and Pipe Fittings
817 Anchor Cement
818 Fein Tool Bag
819 (2) Large Porta Power Cylinders
Largest, 12'' L.
820 Assorted Ratchet Straps
Normal use.
821 Assorted Ratchet Straps
Normal use.
822 Assorted Ratchet Straps
Normal use.
823 4" and 5" Castor Wheels
824 Fire Extinguisher Bracket
New condition.
825 Reese Pintle Mount
Good appearing condition.
826 Stanley Tool Chest
29'' H. Normal use.
827 50' Torch Hose
New condition.
828 Heavy Duty Lifting Lugs and Adjusters
829 Yale Forklift Starter
Good appearing condition. Unknown working order.
830 Metric Tap and Die Set
Good condition.
831 Ridgid 18" Aluminum Pipe Wrench
832 (4) Quick Binders
For 5/16" and 3/8" chain.
833 Snap-On Pneumatic Hammer
834 Clevices and Hooks
835 (2) 2-3/4" Weld Coupons
836 32" Diameter Roll of High Tensile Wire
837 (4) Hydraulic Cylinders
Expected use and wear.
838 MIG Gun Liner with 6-Pin Connector
Good condition.
839 (4) Halogen Work Lights
Normal use and wear.
840 (2) Kobalt 10" Halogen Work Lights
841 Stanley SAE Combination Wrench Set
842 1/2-Ton Chain Hoist
843 15" Hand Riveter
844 Quick and C-Clamps
Ranging 3 1/2'' - 11''.
845 (6) Castors
Good appearing condition.
846 Choker Slings
Assorted sizes.
847 (2) Boxes of Hardware
848 Used Alternator for Yale Forklift
849 (4) Metal Castors
Used condition.
850 Oil Dry Pads
851 Chicago Stud Welder Kit
Like new.
852 MW Powder Torch
Model-10. Like new.
853 Tweco Spray Master MIG Gun
New in box.
854 Magnetic Pipe Cutting Tractor
For all pipe sizes. Like new.
855 (4) Manufactured Hooks
856 Heat Gun with Jigsaw
857 Drill Doctor Drill Bit Sharpener
858 550 Lb. Chain Hoist
Like new.
859 550 Lb. Chain Hoist
Like new.
860 Assorted 3/8" Chain
861 Rototec Gun with Reamers
862 1/3 HP Sump Pump
863 (2) Large Pipe Clamps
Adjusts to 16".
864 Hand Bander with Pipe Indexer
865 Pipe Bending Dies
866 Electric Spot Welder
Unknown operation.
867 14" Chop Saw
868 (3) Fabricated Roller Stands
10'' H x 6'' L.
869 5 HP Generator
Unknown working order.
870 Hydraulic Pipe Bender Frame
871 10-Ton Toe Jack
872 1/4-Ton Chain Hoist
873 1-Ton Chain Hoist
874 1/2-Ton Chain Hoist
875 Levels
Largest, 6' L.
876 (2) Creepers
877 (2) Core Drills
3" and 4" D.
878 1-1/2 Ton Chain Jack
879 Approx. 20 Ft. Chain with Double Hooks
880 Dumore Spindle Grinder
881 Tubing Bender Dies
882 Craftsman Hardware Organizer
883 Trailer Breakaway Charging System
884 1-Ton Chain Hoist
885 Used Torch Hoses
886 (4) 6-Ton Jack Stands
887 Electric Motor with Air Compressor Pump
888 Schedule 40 Pipe Fittings
889 Turntable Torch
890 25' Torch Hose
891 New 50' Torch Hose
892 New 50' Torch Hose
893 1/4-Ton Chain Hoist
894 1/4-Ton Chain Hoist
895 (3) 1/4" Chain Binders
Good condition.
896 Pneumatic Grease Gun
897 Clear Vinyl Hose
898 Tire Chains
Unknown size.
899 Corner Guards and Electrical Box
900 Lifting Slings
901 New Grinding Shields
902 Schedule 40 Pipe Fittings
903 Spray Paint and Antifreeze
904 (9) Quarts of 10W40 Motor Oil
905 Cutting Fluid
906 (6) Cans of Brake Cleaner
907 Antifreeze with Cutting Oil
908 Gas Leak Detectors
909 (5) Tubes of Grease
910 (5) Cans of Anti-Splatter
911 (6) Cans of Starting Fluid
912 (12) Cans of Starting Fluid
913 25 Ft. Heavy Duty Extension Cord
914 Funnels
915 20" Crimper
916 Cable Rail System
917 Fabricated Work Stand
28'' H x 60'' L x 33'' W. BUYER'S NOTE: Items in photos located on and under work stand are NOT included. Includes stand only.
918 Bar Guards
919 Hilti Drill Stand
36'' H. Normal use.
920 Hilti DD-BP-U Vacuum Pump
921 Hilti Core Drill with Water Supply
Normal signs of use.
922 (2) Flexible Templates
Includes 3' and 9'.
923 275 Gallons of Used Oil in Poly Tote
924 275 Gallons of Used Oil in Poly Tote
925 275 Gallons of Used Oil in Poly Tote
926 275 Gallons of Used Oil in Poly Tote
927 Steel Containment Tank
8' L x 4' W.
928 Steel Containment Tank
48'' x 54''.
929 Steel Containment Tank
48'' x 54''.
930 130 Gallons of Used Oil in Poly Tote
931 330 Gallon Poly Tank
932 Werner 28' Extension Ladder
Good appearing condition.
933 Badger Fire Extinguisher
Has full charge.
934 Assumed 20 Lb. Fire Extinguisher
Good condition. Full charge.
935 Assumed 10 Lb. Fire Extinguisher
Good condition. Full charge.
936 Assumed 20 Lb. Fire Extinguisher
Good condition. Full charge.
937 (2) 7-1/2 Ft. Fork Extensions
938 (2) 90" Material Stands
939 (2) 90" Material Stands
940 Fabricated Bottle Cage
72'' H x 48'' D x 29'' W. Does NOT include bottles shown in photos.
941 Fabricated Bottle Cage
72'' H x 48'' D x 29'' W. Does NOT include bottles shown in photos.
942 Double Door Flammable Cabinet
65'' H x 23'' W. Includes assorted fuel cans.
943 Jib Boom
72'' L.
944 (2) Heavy Fabricated Work Stands
42'' L x 28 1/2'' H.
945 (2) Heavy Fabricated Work Stands
42'' L x 28 1/2'' H. Includes two 16'' extensions.
946 (2) U.S. Military Artillery Ammo Cans
14 1/2'' H x 18 1/2'' L. Paint scratches and wear.
947 (5) Steel Parts Bins
12'' W x 20 1/2'' D. Finish scratches, oxidation and wear.
948 (5) Steel Parts Bins
12'' W x 20 1/2'' D. Finish scratches, oxidation and wear.
949 (5) Steel Parts Bins
10'' W x 23'' D. Finish scratches, oxidation and wear.
950 (5) Steel Parts Bins
10'' W x 23'' D. Finish scratches, oxidation and wear.
951 (6) Steel Parts Bins
10'' W x 23'' D. Finish scratches, oxidation and wear.
952 Fabricated Hydraulic Bending Press
60'' L. Includes 8" hydraulic cylinder.
953 (6) Plastic Pallets
954 275 Gallon Poly Tote
Was used for oil storage.
955 275 Gallon Poly Tote
Was used for oil storage.
956 275 Gallon Poly Tote
Was used for oil storage.
957 275 Gallon Poly Tote
Was used for oil storage.
958 330 Gallon Poly Tote with 205 Gallons of Used Oil
959 230 Gallon Poly Tote
Was used for oil storage.
960 230 Gallon Poly Tote with 230 Gallons of Used Oil
961 230 Gallon Poly Tote with 200 Gallons of Used Oil
962 230 Gallon Poly Tote with 230 Gallons of Used Oil
963 230 Gallon Poly Tote with 230 Gallons of Used Oil
964 Containment Tank
48'' W x 54 1/2'' L. Good condition.
965 Containment Tank
48'' W x 54 1/2'' L. Good condition.
966 Greenlee Band Saw
Normal signs of use. Good working order.
967 True Temper Wheelbarrow
Normal signs of use.
968 (2) Iron Floor Grates
48'' x 26 1/2''. Heavy weathering, corrosion and wear.
969 Montgomery Ward Refrigerator/Freezer
65 1/4'' H x 31 1/2'' W. Good working condition. Will need cleaned.
970 Kenmore Microwave
17 1/2'' L. Good working order. Will need cleaned.
971 (56) 18" and (8) 36" Form Stakes
Click for Fr8Star Freight ShippingGet Shipping Quotes