GX390 Honda 132 HP Air compressor. In working condition. H: 26 in. W: 45 in. D: 27 in.

Pick up os by appointment only. Call ahead to set a time for pick up. Arrangements can be made ahead of time for pick up of larger items. Call 905 691 4991 to make appointments and for further information.

Gliding picnic table swing with heavy metal frame and new woodwork (recently built). Very heavy, may need disassembly before move. H: 74 in. L: 122 in. W: 58 in.

10,000 lbs max capacity

Various links and lengths

Various sizes. Including washers, bolts, screws, rivets, etc.

1000 gallon tank, 50 feet of hose, direct wired (Started up and shut off, may have a blown fuse). As is. H: 45 in. W: 51 in. D: 20 in.

Heavy duty industrial clamps in various sizes H of largest 14 in

Motomaster wood creeper. L: 36 in.

Possibly for table saw, etc. H: 24 1/2 in. W: 24 in. D: 21 in.

L 29 in., W: 35 in. H: 36

No handle (but we may find one) H of tallest: 12 in. In working condition.

Working order. No handle. H: 11 in.

Including one Motomaster. Both working. H of tallest: 8 in.

200 amps. Including welding mask and lines. On metal dolly. L 18 in. W:18 in. H: 34 in.

Approximately 20 in total.

L: 36 in.

Irwin Manufacturer

Cause you can never have too many vice grips

Including various ball been hammers and other items

1/2 horsepower bench grinder, Arbor 5/8 inches. In working order. L: 17 in.

With heavy metal top and legs. H: 36 W: 37 in. L: 96 in. Vice sold separately

All metal bits in various sizes.

Three sets in boxes. Not complete

Bits for drill press, in various sizes and lengths

With front end bucket and belly mower.. 9790 hours. In working order. Preview available on tractor. Call 905 691 4991 to arrange time.

Attachment for Kubota tractor.

Including boxed set, etc.

Pick up os by appointment only. Call ahead to set a time for pick up. Arrangements can be made ahead of time for pick up of larger items. Call 905 691 4991 to make appointments and for further information.

200 amp. arc welder. H: 18 in. W: 21 in. D: 12 1/2 in.

Heavy duty industrial metal lathe on heavy stand. In working condition. With various attachments. H: 50 in. W: 78 in. D: 28. Extremely heavy. Purchaser is responsible for loading and removal.

With heavy metal plate. L: 50 in. H: 27 in.

Sixteen drawer rolling Mastercraft toolbox with tap and die chisels, screwdrivers, wrenches, sockets, etc. H: 51 in.

Unfinished. H: 24 in. W: 43. D: 24 in.

Including michrometers and other assorted tools. L of longest: 14 1/2 in.

Four included in the lot (only 3 in the photos) H of each: 17 in.

Built by Allen, engine runs, unfinished. L: 72 in. H: 42 in. Electrical complete, hydraulics need work

Home made, possibly for pipes or metal rods. Works on compressed air. H: 28 in. W: 24 in. D: 13 in.

In working condition.

Pick up os by appointment only. Call ahead to set a time for pick up. Arrangements can be made ahead of time for pick up of larger items. Call 905 691 4991 to make appointments and for further information.

Approximately 180,000 kilometers. With running boards. In running condition. Sold uncertified. Minor rust around front lens. Small dent to drivers side front fender and side view mirror. Preview of truck is available. Call for appointment, 905 691 4991

Including socket sets, grinding wheels, etc. H: 37 in.

With man sawing wood. L: 24 in

On metal base, missing motor. Ht. 42"

Regal 16 cast iron stove with ornate top and nickel plated legs and side panels. Ht. 44" w. 27" d. 30"

Senior Liver and Edge milling machine. Not powered, selling as is. Ht. 55"

Marked McDougall, Galt On. Late 1800's. Modified with electric motor. Length 27"

Possibly trailer tires marked 4.0/4.00-8. In fairly new condition. Rim diam. 8 3/4"

With drawers filled with brass fittings. Ht. 11 1/2 x 17 x 6"

Including thick metal sheets, drive shaft, and heavy I beam constructed piece, Length of heavier piece 64"

One new in plastic

Shelf lot filled with belt sanding paper, tool box with contents, etc.

Including electric timer, bolts, pipe fittings, etc.

Including pulleys, airless sprayers, motor, etc. Lots of heavy metal.

With hydraulic components, and heavy metal pieces.

With hydraulic pumps, pulley wheels, electric motor, etc.

3 H.P. boat motor made by Eska dated 1973. Has compression. Selling as is.

In as found condition, length of the longest 16"

Made by Record, England. Length 24"

Made by Mastercraft in like new condition with gauge.

Made by Reynolds

With metal shelves and heavy duty frame. Ht. 96", w. 69" d.36". (must be picked up later in day)

Including 2 gauges, welding hoses, torch, etc.

Home made leaf vacuum with 5.5 h.p. Honda engine (has compression), made extremely well!! Ht. 49" length 86", w. 31.

Tractor snow blower attachment.

13 gear with 13 h.p. engine. Been sitting for a while, tires flat, selling as is.

Small size tractor with Wisconsin engine in as found condition.

Hydraulic 2 way control in like new condition. Length 11"

1 in newer condition. Length of longest 11"

With lid. Ht. 19"

With gauge, very dirty. Diam. 16"

Heavy duty pipe cutter. Length 18"

With figure and wood blade, partially finished. Length 26"

Including Miller hammer drill.

Hein Werner press. ht. 62"

6"clamp tool.

Length of longest 17"

With cylinder. Ht. 30"

7' shelf with contents including nuts, bolts, hydraulic pumps, 10" carbide saw blade, battery charger, motor, etc.

Very heavy rod and 2 heavy metal clamps. Length of clamps 78"

With ornate detail. 12 x 13"

Length 18"

With divided interior.

Length of longest 33"

With 220 plug

Made in England with some accessories and protective cover on back. Ht. 52" w. 96" d. 27"

Length of longest 50"

Ht. 45"

Ht. of tallest 35"

With 7" x 12" cutting band. In working condition. Ht. 39" w. 49" d. 16"

Including Teeswater On.

Hand made with bird decoration. Ht. 27"

Ht. 48"

In various sizes and fittings together with a couple belts.

Including treaded rod, wire on roll, old press, etc.

Including wenches, electrical cord, mixed tube steel, (a lot of scrap weight)

Including trailer fenders, light fixtures, several pieces of long steel, tube steel, angle iron, etc.

2 white enamel round fixtures with another metal fixture and other. Diam. of enamel fixtures 18"

Heavy duty shelving with metal shelves. Ht. 94" w. 114" d. 40". (NOTE: must be picked up later in pick up time)

Includimg set of 4 casters, oil cans, grease gun, etc.

Including 2 boxes filled with metal and larger pieces.

Including biscuit joiner, drill, planer and dremel.

Model 51. Has compression but couldn't get it to start. In original box.

Including Black and Decker grinder and router, Dewalt circular saw and drumel.

Has compression.

1 by Weed Eater and the other Home Lite. As is

Matching pair of trailer (?) tires on rims and other small tire. Diam. of rim 7"

Including Hitachi plunge router, Makita 6" grinder, B & D drill and old school metal shear.

Has compression. NOTE: handle broken.

Has compression, selling in as found condition.

Including Ryobi drumel and other, brad nailer.

18 volt with 2 batteries and charger. Working.

In working condition.

Including 2 way control, pumps and metal item. Length of longest 24"

Pick up os by appointment only. Call ahead to set a time for pick up. Arrangements can be made ahead of time for pick up of larger items. Call 905 691 4991 to make appointments and for further information.

For delivery of larger equipment, contact: Vasko Arbutina | M&R Estimator Co-Ordinator Tel: 519-650-7444 Fax: 519-650-5707 Cell: 519-504-8415 Direct: 519-650-7085 Cambridge Rigging - 519 623 4000 J & G Machinery Movers, Georgetown 416 990 8600