S/N: 800 051 121 HP: 30 HP Engine / Fuel: 3 cylinder, Gas Transmission: 4 speed Series B Rear 540 PTO, belt pulley, 6ft Wide Blade, overall 114in Long, tracks move freely

S/N: Unknown HP: 14 Engine / Fuel: 2 cylinder gas 4wd/2wd: 2wd Transmission: 3 speed Tires flat, right rear ri. Is bad

S/N: TO-45580 Engine / Fuel: 4 cylinder Gas 4wd/2wd: 2wd Transmission: 4 speed 3 Point hitch, 540 PTO Front tire needs air.

Anvil is approximately 31 1/2 in. L x 4 3/4 in. W x 12 3/4 in. H Is mounted on i-beam that is approximately 18 in. H

Approximately 28in L x 5in W x 12in T

Overall dimensions are approximately 40 in. L x 15 in. W x 39 in. H Blower moves freely.

Approximately 29 in. H Blower moves freely.

Approximately 30 1/2 in. H Blower moves freely.

Green one is Free and spins, Red one is Froze up.

Ford 4 cylinder generator with a Empire electric plant and a old Lincoln welder with a 2 cylinder Wisconsin

Odometer is 18442.2, standard shift. We know nothing about this. Presumably an Air Force Jeep. No Title or Registration

Make: Bush Hog Model: 4 Ft. Gear box is froze.

Approximately 11 ft. Wide x 9 ft. H Mounted on steel i-beams.

Cub 104 motor might be locked up good tires and deck, toro push mower and walk behind brush hog frame

VIN#: 1H9T31620R1057395 Length: 15 feet 1/2" Axles: 2 Title/Registration: No Ball Size or Hitch: 2 5/16

Mode# KG-114 Approximately 33 in. H x 15 in. Diameter

Tecumseh Engine. Hasn't ran in a few years. Has compression

Stackable is approximately 67 in H x 34in L x 11 1/2in W. Top Glass is cracked. Front opens. Other is approximately 47 3/4 in. W x 13 in. D x 27 in. H(Glass is broken in some sections) Front opens.

2 Jamestown Bott Co. Pump Tops, LANG’s Jamestown, NY Capacity 26oz, Cowan Bros. Jamestown, NY

Approximately 24 - 2x6x8ft

Includes Buffalo Blower and vent Blower moves freely.

1 Lancaster blowers. Blower moves freely.

Both move freely. 1 is a Lancaster.

5 spin free, 3 are locked up, 1 has broken housing

Fuel Economizing forge blower, directional vent. Blower spins freely. No base

Champion Blower, spins freely

Shovels, handsaws, log dolly, Jack hammer attachments, ice block tongs, rail car tool

craftsman welder

6 boxes of carriage bolts

Joyce 35 ton jack

Old grinders, squirrel fan, metal cutting saw, vise and drill press

5 motors, 2 bench grinders. Unsure if the grinders work,

18 in. Crescent 12 in. Crescent Crescent- Bridgeport Suregrip nail puller 18 in. Merit Tool 10 in. Adjustable wrench

Large vise heavy 40" long, face 8” pole 18”

4in Jaws, has been rewelded at some point

PB blaster cans, gulf motor oil, valvoline 10w30 , grease and oil cans and fly wheel pullers and jumper cables

Has kerosene dripper. Overall approximately 47 in. L x 24 in. W x 59 in. H

Variable speed drill press. One phase electric motor

Hand feed 1 foot feeder 38" by 26” 1 phase 230 volt

Approximately 71in Tall

Approximately 34 in. W x 22 in. D x 49 in. H

Approximately 28in x 20in x 30in Tall

Overall approximately 33 in. W x 32 in. D x 69 in. 6 in. Wheel Single phase

Approximately 25 1/2 in. W x 21 in. X 24 1/2 in. H

Gas stove 39" tall by 1foot wide

grindingwheel Drill press is 42in overall. Wheel is broken.

1-20 Scott- Atwater and Johnson 9.5 hp and Neptune motor and OMC boat gas tank, tempo boat gas tank and a Johnson boat fuel tank and a anchor

Several different lengths and widths of belts.

Rods, stands and copper Wire only! Approximately 6 rods and 6 stands.

All 4 weed eaters spin freely and the 2 chainsaws are locked up

9 pry bars smallest 3 ft biggest 8ft

2 handyman jacks 9 screw jacks

Axes, 4 peevees, saw blades, hoe, meat cleaver, ratchets, wood mallets, wedge, log tongues, 3 burner stove, hatchets, log dolley, and contents of shelves behind.

Wheelbarrow has metal wheel. Roller is approximately 20 in.

2 with handles, 4 without

Blocks and tackle 11foot log chain, 7 foot long log chain 6 feet log chain

4 - Large 8in Casters, meat grinder, cherry pitter, multiple T handle drills

All gutter pieces are new. 7- 10 ft. Gutter sections down spouts, bends, gutter screws, end caps. 2 2 large pieces of rubber roofing. Unknown size. Several pieces of 6 in. Duct tees and fittings. Wood not included.

American fiber light canoe and 5 paddles

Wood ladders are 15ft sections so 30ft total so 25ft working height.

3 double sides saw blades, 2 saws and an ax

3 - 2 prong pitch forks, 3 - 3 prong pitch forks, peevee, coal shovel, hand held sickle, 3 standard pitch forks, 1 pry bar, 1 extra handle and 1 extra peevee head. Some handles are approximately 70in long

Pick axe, square shovel, vintage post hole digger, 4 - 3 prong pitch forks, 4 - standard pitch forks, steel brissle broom, antique oil canister

Sickle, splitting maul, rounded and square shovel, peevee, 2 puck axes, 2 - pitch forks, pry bar, extra peevee handle, and more

Approximately 15 unused boards. 1x3x8s, 2x4x8s, 2x4x12s, and others

Approximately 50 pieces.

2 International Harvester seed hoppers and approximately 9 planter plates

6 pulleys/block and tackles, I-Beam Trolley, small level load chain

Slip bucket is 29in wide, 2 augers for pole hole digger, auger diameters are 7in and 10in

Approximately 9 wheels

contents of shed

1 large and 1 partial roll of 4 ft. Galvanized. 1-3 ft. Coated 1- 2 ft. Welded 1- roll of b!arbed wire

Old mill, blower motor, multiple belt pulleys, and lots more scrap, PVC pipe

Pretty Much everything in the left side of the Garage bay. Mill head is froze up. Lockers, parts tot eh machines on the ground.

2 - 10ft long chains, one chain has no hooks the other has 1 hook and eyelet, 2 - 5ft chains with hook on 1 end only, 2 logging tongs with chain

Simplex 329 unknown tonnage, Duff is 15 ton

One says 15 ton. Other is unknown.

Both Upright vises are approximately 39 in. H Pipe Vise is approximately 3 ft. H

Various sizes ranging from 12in to 20in tall. Various widths 1in to 7 1/4in

Fermentation tank 30" by 27” wide 3 feet tall

Sap buckets and sap taps and bucket lids

Approximately 17 total of various sizes

Upright vises are approximately 39 in. H and 43 in. H Jaws on both are approximately 5 in.

Stove is approximately 30in x 26in x 16in. Stove utensils

Minute Man Motor Oil can, Mobilube, Quaker State, Mobil, Kendall, pennzoil

4 feet by 3.1/3"

Irons, bells, Beefeater Yeoman(broken), 2 Western Union telegraph signals, Pyrex dishes, buggy light, Burley and Bright Tabacco can and more

Old tongs, pliers, socket set, husky tool box, magnetic trailer alignment kit, tool set and a bucket full of handles

5 sewing tables 2 sewing machines, boxes full of records and books, display case, morris, old push mower and a hydraulic jack

1 Volts meter, 1 - Amperes meter, 6 and 12 Volt Charger, DC Volt tester

2 Dietz Night Watch, embury co, 2 Coleman Quicklite,

1 Westinghouse electric heater 1 universal electric heater 1 polar cub electric heater 2 unknown electric heaters and a fan

11 chairs 1 dresser creznor heater pressure cannor contents of not tagged upstairs

Over all approximately 44 "tall by 16 inch wide