66in Snow Pusher 55 inch Bucket Needs battery

Trumpf pull behind generator, with Onnan generator, model #3A1 7-G(M).

Bridgeport Milling Machine, acu-rite computer does not work. 3 phase, 1HP. The table is 42in by 9in. Rigging Fee $300

Bridgeport drill press with Acu-Rite digital computer system. 3 phase 230Volt, table is 4ft 9in. Rigging Fee $300

Serial #: 530629 3 Foot Bed, 6-1/2 inch Swing, 1-1/4 inch Bore Act-rite Digital Readout 3 Phase, 208/240/440 Volt Needs new drive Belts. Rigging Fee $200

6in x 12in 6.5ftx 3ft overall

Do All Band Saw metal master, continuous sawing and filing. Table is 2ft by 2ft. Rigging Fee $100

3 phase 5HP 220 or 440 Volt #156637 Rigging Fee $50

On rolling cart 4ft x 3ft

Manual Hydraulic Press, W-70in by H-77in. Foot Base W-42.5in Rigging Fee $100

Wiedemann machine company, Rotary punch, 8.5in rotary diameter. Rotary punch is 17in tall. Base measurements are as follows, W-15.5in by D-26in by H-38in

16GA Hand roller with motor Rigging Fee $50

16GA

Overall 10.5ft x 5ft Rigging Fee $200

Chicago Steel Bending brake, size 5ft up to 18 Gauge Dimensions are approximately 87 in. L x 26 in. W x 57 1/2 in. H Rigging Fee $50

Model 93 Punch and Model 100 Notcher. With all the Punches(1/16in to 2 inch Round, 2-1/4in and 2-3/4in), Tubing Notchers. Serial #719 Rigging Fee $50

On stationary stand 53.5in H x 24in W x 27in D

PowerMatic Band Saw, model 87, serial# 487272. Table base 2ft by 2ft. Rigging Fee $50

On stationary stand overall 4ft H x x2ft W x2ft D Single phase 220

CV/DC 3 phase On rolling stand overall 65in H x 32in W x 30in D

Steel frames table with wood top is approximately 74 in. L x 31.5 in. W x 31.5 in. H

36in H x 57in W x 30in D Rigging Fee $50

Model: G9922

Model: 118-001 230V / Single Phase

Atlas Band Saw model#912 serial#024228. (CART NOT INCLUDED). Table is 14in by 14in.

PowerMatic sander 12in wheel and 21.5in belt. 110volt Dimensions are approximately 27 in. L x 23 in. W x 55 in. H

On rolling cart overall 42H x 32W x 37D 50ft Power Cord 3 phase, 200 AMP Welder 1phase, 110V, 200 Amp feeder Rigging Fee $50

Buffalo Drill press No16 speeds. Serial#50-3743, 3 phase. 22in by 23in table. 83in in height, 48in depth. 3 Phase Rigging Fee $100

24in x 36in x 4in Plate. 25in x 37in x 38in tall with Table

Has top freezer Model# HTS17CBTDRWW Serial# MS857332 Approximate dimensions are 28.25 in. W x 30 in. D x 64.25 in. H

On wheels. Overall dimensions are 44.5 in. W x 24 in. D x 37 in. H ( with top open 59 in. H) Includes 19.5 in. L x 16 in. D side mount tray. Does not include parts in it. Still contains fluid in reservoir.

Comes with Craftsman Vacuum, CH Air Dryer

With extra Dies

Model AP400 120V 1HP Motor

Cabinet itself is 38 in. W x 24 in. D x 67 in. H Dry blast system adds another 8 in. On the side Comes with air dryer

Red one is approximately 30 in. L x 16 in. W x 32.25 in. H (Handle is 2.25 in. From side.) Black cart is approximately 39.75 in. L x 29.25 in. W x 39.25 in. H. Comes with cardboard contents on top.

Tables are: 75in x 36in x 32in tall / 5ft x 3ft x 32in tall / 6ft x30in x 30in tall

Approximately 22.5 in. Diameter x 29.75 in. H (Extends to Approximately 47.25 in. H)

Serial #: 33546

Model# 2B1A 4 in. Cut. Stands approximately 35.5 in. H with handle up.

1/2 to 1 inch

Largest socket is 2 in. Smallest is 3/32. Outside of box is not Snap-on but is included.

With Stand

Small gray bin is approximately 33.5 in. W x 11.5 in. D x 10.5 in. H Blue bin is approximately 33.5 in. W x 17.5 in. D x 10.75 in. H 2 bottom gray bins are approximately 30 in. W x 17 in. D x 10.75 in. H They are on a metal fram stand that is approximately 39.25 in. W (with 2 in. handle) x 18 in. W x 43.25 in. H Bins contain nuts, bolts, washers, lock washers, screws, set screws, socket head cap screws, o-rings and much more! Contents on top included.

Lockers are: 36in x 19in x 6ft tall 2 Cabinets are 15in x 29in 1 is 18in x 30in x 58in tall All the paperwork and files in the cabinets are not included

2 Pipe Wrenches, Vise, benders, Threaders, Cutter

1 with 4 in. jaw 1 with 6 in. jaw

Approximately 13 ft., 17 ft and 22 ft

2 - 6ft New 2 - 7ft

Contents and shelves are NOT included! Bins only! Over 250 bins Sized from approximately 11.5 in. L x 4 in. W x 4 in. H to 11.75 in. L x 8.25 in. W x 4 in. H Includes some dividers and new box of bins.

45in x 28in x 38in tall

6 in. Standard vise and also a pipe vise.

Metal rolling table approximately is 30.5 in. L x 25.5 in. W x 37.5 (at full height)

Includes contents. See pictures. Closed measurements are approximately 16 in. L x 8.5 in. W x 12.75 in. H

Comes with contents. See pictures. Box closed is approximately 20.25 in. L x 9.5 in. W x 12.75 in. H

Series 500-506-50 Serial# 7001386

1/3 HP Comes with grinding wheel cleaner. It is mounted on a base that is approximately 24.5 in. W x 37 in. H

Model# 17-965 Serial# 035630 W6070 Overall height is approximately 68 in.

Model# G-1276 1HP motor Approximately 30 in. L x 16.5 in. W x 58 in. H

Auto Rewind with 25 ft hose. New in box.

Was originally designed for motorcycles but is missing the hold-downs. Dimensions are approximately 84 1/2 in. L (plus 62 1/2 in. L ramp) x 18 in. W

Needs a Battery Approximately 54 in. L x 26 1/4 in. W x 77 1/4 in. H

39in x 23in

42in x 18in x 41in tall

Cannon MX700, Epson Stylus NX430, ZEBRA ZP450ctp label printer, phone, organizers, OfficeMax Paper Shredder

Hypertherm Powermax 600 Plasma Cutter, Plasma Cam Model DHC Robotic Table With Cabinet 65in x 63in x 90in tall Table 35in x 24in x 82in tall Cabinet Rigging Fee $200

Bikini Filter, Regulator, Lubricator Combo, 2 Air Sanders, Air Hose Reel, and Extra Air Hose

Wall- mount work station cabinet is approximately 48.5 in. W x 24.5 in. D x 36.25 in. H. Has a slide out work space in the bottom. 2 drawer file cabinet is approximately 14.75 in. W x 14 in. D x 28.25 in. H Metal shelf is approximately 33.5 in. L x 13.25 in. W x 36.5 in. H Metal file shelf is approximately 13 in. W x 10 in. D x 48 in. H Metal storage cabinet is approximately 36 in. W x 18 in. D x 66 in. H

2 in. webbed top that is adjustable height. Approximately 96 in. L x 28 in. W x 43.25 in. H Has side shelf that is approximately 12 in. L x 10.5 in. W Rigging Fee $50

1/3 hp motor Stands 73 in. H

Adjustable Parrelells, Center Finder.

Model# P350C/CNW90

12 Upright Sides, 12 X Supports, 4 Platforms and Wheels

42in x 72in x 40in tall Rigging Fee $50

61in x 37in. X 37in tall, 46in tall to top shelf

1- approximately 18 in. W x 26.5 in. D x 52.25 in. H (with key) 1- approximately 17 in. W x 25.5 in. D x 52 in. H (with key) 1- approximately 18.5 in. W x 24 in. D x 52.25 in. H 1' approximately 15 in. W x 28.5 in. D x 52 in. H (with key)

8 Ft Capacity. In Pieces. Was completely powder Coated, In the process of being rebuilt. Overall approximately 159 1/2 in. L x 63 in. H Rigging Fee $50

Not including the Shelves or the Strippit Parts. Stainless, Wire, Brass, Aluminum.

Toolbox closed is approximately 26.5 in. L x 12 in. W x 14.5 in. H (with key) Rolling cart is approximately 28 in. L x 27 in. W x 38.5 in. H

166 Inches Long x 70in tall at tallest point. Post is Damaged and comes with additional top

Orange ladder only

26 ft Aluminum Extension Ladder Wood ladder is 11 ft Werner step ladder is 6 ft

Model: SP30 EM Serial#: 31908 208V, Single Phase Capacity 20GA - 12GA Steel

High speed drill bits, Niagara Cutter, green field, single and double end bits.

M4 and M5 Taps. For Drilling and tapping Thin Metal sheets.

Taps of all sizes, screw extractors, high speed, Besley, Dormer, Travers tool co.

Tap and Die sets. Taps and threaders of misc sizes.

Some are Double end. Over 50 bits! Many are unused!

Over 40% are new.

High speed steel bits and tungsten bits. Assorted sizes.

Well over 100 drill bits that are mainly unused! Various sizes.

Cone drill bits, spade bits, key cutters, Woodruff bits. Assorted sizes.

Various sizes. Many are unused. Over 40 pieces.

14 high speed bits. Many new.

Over 30 wrenches of various sizes.

Proto sockets and open end wrenches, Snap-On sockets and rachet, Blue-Point open end wrenches, S&K, Cornwell wrenches. Cresent tool and 1 MAC socket.

Approximately 39.75 in. W ( with side attachments) x 19.5 in. D x 39.75 in. H

Misc sizes of Allen keys and wrenches. Small all the way up to 3/4 - 19mm. 100+ pieces.

Chisel and punches, pry bars. Some proto and 50+ misc other name's. Size range from 4in to 24in.

0-1/2, 0-1, 1-2, 2-3 inch.

Last Word model C and model D-10, Ames 102 and Do-All R1

Over 25.

Over 80 various sizes

With cases. Over 100 various sized.

2 boxes of machinist parallels. Only one missing out of the sets.

Over 50 pieces. Mostly new.

11 pieces of various sizes.

Over 50 pieces of various sized.

Black pipe pieces, electrical boxes, breaker boxes, nuts, screws,box connectors, wire, conduit and more. Includes the shelving.

Bolens model# 11A-BOBL765, Serial# 1E057K02036 21 in. cut with a Briggs & Stratton 140cc motor. Side discharge/Mulch. Toro Model 51972, Serial # AT-260073273

Number Punches, Calipers

Nut drivers, screw drivers bolt cutters with bad jaw, 24in pipe wrench, ballpeen hammer heads, jig saw blades, C-clamp,star bit drivers. Oil filter wrenches.

20 bits of various sizes. 1 1/16 and smaller. Several are new.

Washer Model# RAB5232EW1, Serial# CG1514963 Dryer Model# 7018611W Serial# M15211382

Tool box, jack, rolling cart with contents, Makita circular saw w/blades, makita drill, paddle bits, drill bits, sockets, files, 2 crow bars, levels, saw zaw blades new and used. Misc other tools inside tool chest.

TrumpF quickset, Model type 6822-H5. Die cabinet with dies and tooling.

Sioux 1/4HP and Louisville

27in x 13in x 55in tall

2 - 66in long x 32in tall and 2 - 35-1/2in long x 34-1/2in tall

Pliers, needle nose pliers, punches and tin snips. Also getting a few miscellaneous vintage tools. See pictures.

3 seperate Torch hoses, tips and regulators. One with a gas saver, welding mask, hard hat.

Washer is a heavy duty, 2 speed, extra capacity. Model# A612, Serial # 033215XL Dryer is Model# 417.93042300, Serial # XD40415510

Hardware screws sheet metal screws, tapping screws, 6 new rubber garge door seals, misc other screws.

6 - dual wheel casters and more

Tool die lot, tools, refrigerant gauges, files, brass number stencils, punches,

2 metal shelves with contents, Allen wrenches, welding wire, hand tools, screw drivers, tin snips, tooling die items. Squares.

Bumper is from Model B

4ft long x 31-1/2in tall

54in x 24in 24in x 19-1/2in x 12in deep Sink

Stainless steel and angle iron shevles only! (CONTENTS NOT INCLUDED). 1st shelf 74in wide, 80in in height, 24in deep. 2nd shelf 64in wide, 21 1/2 depth. 3rd shelf 36in wide 60 1/2 height, 24in depth.

Shelves NOT INCLUDED. Various pieces of stainless, aluminum and other metals as scrap metal. Green table is scrap.

2ft x 4ft x 14in tall

9, empty 55 gallon drums, misc duct work, light fixtures, parts of desks, wood, fencing,

Belt sander is 1 in. X 30 in.

With weights on wheels

4 burner top. With bottom broiler. Approximately 30 in. W x 27 in. D x 44.25 in. H

Cart is 60 inches Widde x 75 inches High plus height of rolls 5 New Rolls of Starform 1/8 inch 4x 550 ft -Slit 12 in

Approximately 31 in. L x 13 in. W x 16.5 in. H when closed. Goes up 60 degrees. Comes with Approximately 15 extra blades

11 pair, some with swivel heads.

10 wrenches. Ridgid, Cornwell and other manufacturers. One has broken jaw.

1 - 4 inch Proto

Approximately 30.75 in. L x 24.25 in. W x 39 in. H

17 pair of various styles. 4 have been altered( see pictures) , 1 is missing adjusting screw.

Approximately 30.75 in. L x 24.25 in. W x 40 in. H

11- No. 406 clamps

7R and 10R

6- 4 WR 4- 4LN 6- 5WR

Mallets, ball peen hammers and more. 21 pieces.

1/4, 3/8 and 1/2 in. sets of metric and standard

Metric and standard

Proro retaining clip pliers and some sockets. Some Craftsman Impact and regular socketsand SK sockets

10 Rulers, 7 large squares, Mitutoyo Digital Caliper, other Measuring tools

28 pair of various sizes

Size No. 2 Serial No. B-22824 Comes with all Extra Dies in Cabinet

6 ft. And smaller

One known to be empty

Cabinet is approximately 36 in. W x 18 in. D x 78 in. H Contents is mainly sanding discs, belts and and Patterns

Model 544 A

3 cordless drills Models DC720, DW959, and DCD771 2 Impact Drivers Models DC 825 and DCF885

Comes with some nuts

w/side Shelves Overall dimensions 36in H x 50in W x 18in D extended work surface is 20in W x 18in D

Adjustable height rolling t-slot table comes with. Approximately 25 in. L x 18.5 in. W x 26 in. H Tubing bender will accept dies for Protool 105

BlackHawk porta power with extra new hose. Numerous smaller c-clamps from 1.5 in. - 3 in. Hack saws, 3 tap wrenches, sharpening stones, files, pipe wrenches and measuring tapes(2 are new) And more!

12in x 16in

Precision Ground Steel 1inch Top Approximate Height adjustment 11inch- 60inch Comes with electric box and 3 Phase Hydraulic Electric Motor

Approximately 60 in. L x 30 in. W x 38 in. H Extremely heavy!! Bring help! Rigging Fee $50

Poly Cart is 26 inch x 60 inch and 32 inches High Metal cart 32 inch x 16 inch and 32 inches High Librarian Cart 29 inch x 15 inch and 36 inches High 3 Stools all seats are at 29 inches High

Contents of the workbench and Cabinet and Workbench. Workbench approximate dimensions are 60.25 in. L x 30.5 in. W x 40.5 in. H Several bins with SHCS screws, Hex head screws, buttonhead cap screws, spacers, nuts, washers, and bolts All stainless hardware. Threaded Rod and Hinges.

Red: 10 Drawers 43.5inch H x 27inch W x 18in D Blue:6 Drawers 29inch H x 20.5inch W x 14in D *Some Contents Included

Mainly pipe fittings and valves Bin's approximately 20.25 in. Diameter x 40in. H

Overall: 36 inches H x 64 inches W x 24 inches D

Approximately 26.25 in. W x 19 in. W x 31.25 in. H Small, 3 drawer bit box is approximately 14.75 in. W x 7.5 in. D x 7.75 in. H Largest bit is 1 7/8.

5 Gal and 2.5 Gal Gas Cans Also comes with dolley and floor jack.

Approx 7 - 2.5 ft interlocking pieces Approx 6 - 4 & 6 ft mats Approx 4 - 18 in x 36 in green mats

Pryor Steel Type marking punches, radius gauges, small hole gauges, surface roughness gauges, and more

Approximately 35 ft. L

Approximately 30 ft. L

Milwaukee Nibbler, Milwaukee drill, Black &Decker drill, PET Model 551 SuperDuty 1/2 in. Drill, Black & Decker 3/4 in. Drill, torches, soldering iron, Tap extractors, stud extractors, 3- 10 in. saw blades and more.

23in x 28in x 47in tall

Small metal cut-offs, lubricants, scrap pieces, florescent tube lights, and more

Angle, pipe, flat and round stock Largest pieces are 25 ft long Over 30 pieces of different thicknesses. 11-1.25 Square Hollow Stock (Approx 5.5ft long) 12ft 6in and 95in long 4 inch Channel 3 - 6ft 4 inch Pipes

Approximately 30 pieces ranging from 1/8 x 1/2 to 2x 3 x 3/8. Lengths vary from approximately 8 ft. to 20 ft.

Square tubing, rectangular tubing, and angle iron and c channel. Sizes vary from 3/4 in., 16 gauge tubing to 4 in. X 4 in. X 1/4 square tubing. Approximately 25 pieces varying in lengths from 4 ft to 20 ft.

Two tubes of Brazing Rod

6ft x 42in 40in to about 50in tall

9-1/2in wide Rollers, 5 ft Long. Designed to be hooked together

28-1/2in x 24-1/2in x 39in tall Cast Iron Top

1 inch Cast Iron Top 24in x 30-1/2in Table 38in tall

Round, angle, tube, flat, I Beam.

Barrett 10Ton Jack

Shelf not included. Various lot of rounds, angles, squares,rectangles and more. From small pieces are approximately 1 in. - 80 in. L Over 100 pieces.

Over 100 Pieces. 20ft long down to 5ft. All the Items in the pink ribbon and on Top of the Rack

Everything between the pink ribbons. 1/8 - 3/4 Round Stock,

3 - 14GA 2inx4inx24ft Tubing

Items on shelf( shelf not included) metal in front of the door(bar acrossed door that is attached is not included) and Miscellaneous metal on catwalk Includes cabinet but YOU will have to remove it! Bring help! Approximately 41.5 in. W x 28.5 in. D x 33 in. H

Polymer, plastic and rubber material that is excess, cutoff or cutouts

1/2 x 3/16- 1/4 x 6. 4 ft. L - 20 ft. Approximately 35 pieces.

Pipes and tubes 4 ft. - 20 ft. In length Approximately 19 pieces of various diameter from 1 in. - 4 in.

Shelf is approximately 36 in. W x 12 in. D x 75 in. H Contents contain set screws, miscellaneous hardware, taps, pulleys and miscellaneous metal pieces. Tool box is approximately 20.5 in. W x 13.75 in. D ( with handle 16. 5 in. D) x 30 in. H

2 blowers have GE motors, 1 has Westinghouse Metal Cart is approximately 23.75 in. L x 12 in. W x 28.25 in. H

Model B, Serial # B-344 Approximately 15 in. cut. Blade size 7 ft 5 in. X 1/2 in. X .025 Overall dimensions are approximately 45 in. L x 28 in. W x 30.5 in. H when closed.

Approximately 8 ft. L x 3 ft. W Extends from 32 in. H to approximately 65 in. H 4000 capacity Rigging Fee $50

Wood dolley is approximately 52 in. L x 40 in. W x 9 in. H Metal dolley is approximately 46.5 in. L x 35.5 in. W x 11 in. H Material cart is approximately 53.5 in. L x 36 in. W x 28.5 in. H Comes with 2-wheel plates and extra wheels.

Approximately 10 in. W zx 10.5 in. L 1.5 in. Thick

All of the Metal Scrap in the front Hallway. 3 Barrels full plus everything else stacked around them.

62in x 30in x 12in tall

3 drawer with heavy duty from wooen top 60 in. L x 38 in. H x 28 in. D

Gojo Hand Cleaner, Rags, Ear Plugs, paints, WD-40, pump Oil, buckets are all above 1/2 full except the ultra build and Loxon paint

Model# 17-965 Serial # 034104W5093 Approximately 67 in. H

Approximately 78 in. L x 23 in. W x 67 in. H Has glass bead in it, not sand. Rigging Fee $50

Chain binders, coffin dozer, clamps, clevises, greese gun, air hose, wheel barrow and other items Table not included!

Approximately 120 in. L x 28 in. D x 41-49 in. H On dual casters. Contents not included. Rigging Fee $50

3 HP, 3 phase 3 in. X 132 in. Belt Approximately 45 in. L x 54 in. H x 70 in. D with side sander. Comes with 8 extra 60 grit sanding belts. Does not come with dust collector in back.

3 phase, 3 HP Approximately 27 in. L x 21 in. W x 48 in. H Model# 54 Serial# B537

3in x 132in Belts 2 - A45 Grit 4 - A100 Grit 2 - A16 Grit 51 - A6 Grit

Capacity: 12ft x 6ft and 1000lb Equipped with VLS-08 Leakage Sensor

3 Phase, 450 AMP

42in x 20-1/2in x 16in tall and 17in x 31in x 32in tall

Approximately 22 in. Diameter x 29.75 in. H (Extends to Approximately 47.25 in. H)

Stainless, Steel and Some aluminum. All mostly used materials and drops or pieces with parts cut out.

Rounds, solid rounds, angle and flats Approximately 25 pieces. Rounds are approximately 31 in. L -146 in. L Flats and angles are approximately 61 in. -261 in. L

All 20ft Long except for 3

Barrel not included

4x10 Sheets 1 - 11ga #8 1 - 11ga 2b 3 - 12ga 2b, one has 2 cutouts 1 - 3/16 inch thick, has one cutout in corner 2 - 14ga 2b 1 - 14 #4 1 - 16ga #8 2 - 16ga 2b 2 - 18ga 2b 2 - 6in x 57in 16ga #8 2 - 20in x 8ft 16ga 2b 2 - 18in x 8ft 16ga #4

Approximately 14 boards thqt are approximately 123 in. L x 7 in. W x 3/4 in. D 10 Smaller boards are approximately 48 in. L x 5 in. W x 1/2 in. D 4x4 is approximately 147 in. L Crate bottom and top are approximately 123 in. L x 50.75 in. W 7- approximately 120 in. X 47.5 in. W pallets

Has 2 in. Ball

Bin is approximately 41. 5 in. W x 66 in. H x 16- 22 in. D(tapered) Bins contain springs, various sized nuts and bolts, various sized cotter pins, various sized rivets, various types and sizes of screws, brass fittings and more!! 4 in. PVC is approximately 14 ft. L And approximately 2-10 ft sections 2 in. PVC with Ts in it.

Bauer Markrolon: 1 - 20-3/8in x 8ft x 3/8in thick 1 - 4ft x 78in x 3/8 thick piece with 22in x 24in corner cut out 1 - 15-1/2in x 6ft x 3/8in thick 6 - Roughly 26in x 15in x 3/8in thick pieces Abrasion Resistant Sheet: 1 - 4ft x 8ft x 1/4in thick 1 - 23in x 45in x 1/4in thick 1 - 15in x 48in x 1/4in thick 1 - 19in x 48in x 1/4in thick Various Other smaller pieces ranging in thickness from 1/8 to 1/2in thick

102in wide Roll of Aluminum Sheeting 3 - 12ft x 6-3/8in x 1/2in thick and one more 9ft Diamond Plate, cutoff and cutout pieces

Steel, aluminum and expanded metal. All metal included are pieces and cutoffs. Rack is approximately 49.5 in. W x 22 in. D x 48 in. H

Everything up here not attached to the walls. Shelves, Metal, Parts

Steel, stainless and aluminum. Some have cutouts. One piece of 1/4 in. tool steel that is approximately 109.5 in. L x 33.5 in. W that has some cutouts. Some pieces are 3/4 in. thick. Longest piece is 120 in. Rack is included.

Misc eletric motors.