Lawson Antique Tools & Shop Equipment
Lawson Antique Tools & Shop Equipment
Schrader Real Estate and Auction of Fort Wayne | Hoagland, IN 46745
Date(s) :  5/17/2024 - 6/9/2024
Buyer Premium :  12.00% on each sale


Online Only Auction
Sunday June 9 @ 6:00 PM
For Auction Questions Please Contact Mike Roy (260)437-5428 LARGE STANLEY ANTIQUE PLANE AND WOODWORKING TOOL AUCTION SHOP EQUIPMENT LUMBER
1 Stanley #68 draw plane & brass draw plane
2 Three block planes – one Capewell brand
3 Stanley #144 corner rounding plane
4 Stanley #5 corner plane
5 Stanley #94 and #83C folding rules
Piece to measure depth is missing off of 83C
6 Stanley #132 block plane
Length: 26"
7 Stanley #45 moulding plane
8 Stanley Bailey #6 block plane
Length: 17"
9 4 draw planes
Stanley level C, Dunlap and Sears 3661
10 4" Morgan bench vise-swivel
11 Chicago 14" cut off saw w/7 new blades
Works as it should
12 Hard to find framed Stanley tool poster
Adhesive from tape on glass Width: 27? Height: 40"
13 Winchester block plane
Marked possibly 3010 Length: 14"
14 2 sets of brass trammel points
15 Stanley #278 rabbet and fillester plane
16 Early #8 unmarked block plane
Patented Oct. 22, 1889 Length: 24"
17 6 drawer hardware cabinets-contents
Drawers are full- large assortment of hardware and basic tooling
18 Keen Kutter #96 draw plane
19 Stanley #46 combination plane
20 Boxes of assorted tooling, hardware
21 Stanley #39 1/2" Dado plane
22 Stanley Bailey #5 1/2 block plane
Length: 15"
23 Unmarked #4 block plane
24 Stanley #192 rabbet plane
25 Lathe- South Bend model C w/ chuck and faceplates
20" bed
26 Craftsman 6" by 36" joiner
27 Grizzly G1071 oscillating spindle sander
25 1/4" square top Machine is on Shop Fox casters.
28 Rockwell model 43-503 router/shaper
Partially unassembled. Was direct wire. Working condition unknown. Project piece.
29 Large homemade disc sander w/ stand
15" disc
30 Stanley Bailey #3 and Stanley #130 block planes
31 Stanley #194 fiber board beveling plane &
Stanley draw plane
32 Cleveland Rule Co. logger's timber scaling rule
33 Pair of Sargent block planes
One is 409
34 Simplex screw jack
Height: 11" Diameter: At base - 4 3/4”
35 Stanley Bailey #7 block plane
Length: 22"
36 Alumo rabbet hand planes (3)
Alumo 1A, 2B, 3B
37 Wooden calipers in display case
Width: 8” Height: 13" Depth: 2”
38 Keen Kutter block plane
Top of handle is broken off
39 Stanley machinist’s level & early marking gauge
Length: Level 6"
40 Lakeside #4 block plane
41 Tool handles
Length: 4" - 9 1/2”
42 2 sets of trammel points and 2 scribes
Length: 17 1/2" & 24”
43 Bailey #6 block plane
Length: 18"
44 Stanley #39 plane & Stanley #192 dado plane
45 Stanley #71 1/2" closed throat router plane &
Stanley #81 scraper plane
46 Stanley clapboard siding gauge
Length: 8 1/2"
47 Bed Rock #605 1/2 block plane
Length: 15"
48 Stanley #45 plane - 7 planes in one
Complete with original owner’s manual
49 Stanley #193 fiber board plane
Length: 13"
50 Radial arm mill router and shaper system
Table top measures- 40" by 36" Some lathes/bits included.
51 Collins 8" grinder on base
Base does not swivel, but adds stability.
52 3 machinist vise- one is Stanley
53 End mills and cutters
54 Scribes, T bevels and pair of block planes
55 Assorted machinist's tooling
Drill bits, tap and dies, level stands
56 Assorted machinist's tooling
Drill bits/ends and cutters
57 Large surface block table- marble
46" x 72" x 3" Some damage on long edges. Extra time for pickup. Fork lift or loader will be needed for removal.
58 Norton height gauge
11 3/4" tall
59 Coleman Powermate air compressor- 155 psi
with hose. Works well. Glass is missing from gauge.
60 Guardian air compressor- max 120 psi
30 gallon. Powers on and builds pressure.
61 4 metal tool totes
Rust and wear.
62 Biscuit cutter and hammer drill
Makita Dewalt
63 Drill grinding ends/early dremel tool
64 Dremel stand and bench top vise
Vise is 16" wide.
65 Stanley #113 circular plane
66 Stanley #191 and #192 planes
67 Stanley #248 plane and a Craftsman plane
68 Woodworking planes (3)
#60 1/2, Keen Kutter K3, Sargent No V-BM 408 New Haven.
69 Stanley #191 plane and #50 combination plane
1st model Stanley #50 combination plane.
70 Stanley #5 and #6 planes/ #8 Bailey plane
71 Stanley #39 plane and #78 Rabbet plane
72 Variety of different planes (10)
Stanley and different brands, different sizes. 10 total.
73 Stanley #55 plane
With box and guide, very nice plane.
73a Cutters for Stanley plane #55
74 Ohio plane 0-8
75 Large assortment of pliers
Snaring, pliers, crescent, wrenches, side, cutters, many many pieces
76 Selection of hammers
13 pieces
77 Gem Machining vise 6 3/4" jaws
Works smooth we do not have a handle Made in Springfield, Ohio
78 2 cable come-a-longs
79 7 C-clamps- 4.5" to 8"
One is missing knob on bottom
80 Stanley 24” precision level
2 additional 24" levels
81 Stanley planes (4)
#4, Stanley Handyman, etc.
82 Stanley #6 plane and Bailey plane
83 #194 and #81 Stanley planes and a Geral Boxer
plane 3 pieces total.
84 36"-42” bar clamps(5)
85 Stanley plane #29 and wooden plane
2 planes total.
86 Stanley #45 combination plane
87 Primitive tools, rulers, plane, hardware
88 Stanley measuring sticks (2)
Stanley #240, 6 ft and 4 ft.
89 Variety of planes (6)
Some Stanley Keen Kutter plane.
90 Stanley #71 plane and #51 plane
91 Stanley Phelps #3 plane and assorted blades
92 Ohio Tool Co plane and Bailey plane #6
93 Variety of planes (12)
Different brands and different sizes. 12 planes total.
94 Vintage HC Marsh miter clamp and saw
Length: 27 in Height: 10 in
95 Vintage fishing reels and rods with tackle boxes
96 Stanley aluminum plane- #A6
97 Stanley #45 rabbet plane
98 2 handled Stanley #171 plane
One has a cracked handle, as is.
99 Stanley wooden handled tools
#70 circular plane, #82 scraper.
100 Van Camp #50 saw vise
101 C-clamps, crow bars, squares
102 10" rasp, dovetail saws
103 Craftsman 4" bench vise, swivel
104 Metal based workbench w/ wood top
66" wide, 27” deep, 34” tall without backsplash
105 4 antique braces
106 Assorted clamps/vice grips
107 Hammers & clamps, miscellaneous
108 Red boxes of hardware
Proximately 40 boxes
109 Set of adjustable industrial lights
One shade missing
110 Stanley plane #45 with others
111 Block planes (3)
2 are Stanley and one is unknown.
112 Stanley plane #S4
113 Stanley plane #A4
114 Chaplin’s Improved plane #1207
115 Stanley #130 plane
116 Stanley and Bailey planes
#5 1/4 and #S5
117 Keen Kutter plane #7
118 Keen Kutter plane #6
119 Variety of planes
Different sizes and different brands.
120 Stanley plane
121 Stanley Bed Rock planes #605
122 Aluminum squares
60" & 36”
123 Antique Wiegman folding stair gauge
124 Stanley Bed Rock plane #604
125 Aluminum straight edge
126 Stanley Bed Rock #604
127 Stanley Bed Rock plane #604
128 Stanley planes- #50 and #248
129 Vintage Ohio scraping spokeshave tool
130 Antique Pearson & Co Acute Sheffield plane
131 Antique Van Camp hatchet
132 Stanley #113 circular plane
133 Stanley #20.5 circular plane
134 Stanley #55 combination plane complete
135 (6) 2" threaded plates
136 Skil saw, Milwaukee drill, box of misc
137 Clamps, hold downs, cutter heads
Dado blade
138 Plane parts department
Many Bailey Plane pieces: 606,607, 5, Lots of parts and pieces Probably 35 plus pounds of parts, blades
139 Box of rasps and files, corn knives
140 Rolling tool cart-NO CONTENTS
45" wide, 48” tall, 24” deep at bottom shelf NO CONTENTS
141 Core box cutters, shaper round over bits
In wooden carry cases
142 5” x 2” aluminum channel
119" long
143 Pellet free standing stove
American Harvest United States Stove Company 28" square, 31? tall, one piece of pipe, partial bag of pellets. Has fan, current owner never had it installed Buyer to arrange loading. No loader on site Handle on door is broke off
144 2 wooden clamps 6’ & 4’
One short heavy duty clamp
145 Large duplicator- new in box
146 Pine boards- 1x6x10’ (3), 1x8x10’ (1)
147 Dated drill bit sharpener
it lights up and turns on
148 Duracraft 3/4 HP grinder 8"
Works as it should. Light is loose from the unit. It apparently mounted on the table.
149 Homemade buffer on rolling table
24" x 34” Buffer works, comes with wire wheel
150 Shop light heater- new in box
Channel Lock Brand 650W heater
151 12 assorted planes
Bailey 5. & 6 Various states of disrepair. Some rough, some usable.
152 12 assorted small planes
153 Jumper cables
One really good long heavyset, two medium duty ones, two light duty, five total pair
154 2 Stanley/Bailey no. 5 planes
155 Wards Master No. 7 plane
156 Millers Falls plane- 14" long
157 Assorted planes and parts
Six metal planes 2 wood planes/parts
158 Assorted planes
Some Stanley/Sargent
159 Simplex pattern plane w/ bottom blades
160 Rockwell Delta uni-planer 3 phase motor
Untested, bought at FWCS auction. Model 22-300 On dolly
161 Assorted lot of miscellaneous planes
162 4 planes-Stanley Bailey 5&6
2- #5, 2- #6 Notice: Jo
163 (2) 5 1/2" planes, one marked Bailey
164 (2) #7 planes- one Bailey and one Union
165 6 assorted planes
One is a Stanley Bailey 4 1/2
166 2 Keen Kutter #5 planes
167 8 assorted planes
1 Capewell, Stanley
168 6 draw planes- one is from 1866
Sargent/Stanley L. Bailey Boston plane from 1866
169 2 planes- one is Stanley No. G5
170 Primitive measuring tools/other tools
Scribes/ plumb bob/ Yankee ratchet screwdriver/ folding rulers/more
171 Keen Kutter plane- 6 inches
172 Stanley plane- 6" long
173 Assorted planes and parts-
Stanley #45
174 2 Stanley planes- #78s
175 Wilkinson draw knife and Keen Kutter scraper
176 2 books about planes
Patented Trasitional & Metallic Planes in America 2 Volumns
177 Assorted planes
X-acto Craftsman plane in box has broken part.
178 Core box plane
8.5" long
179 Assorted planes and parts
Sizes range from 5" to 6.5" long
180 5 planes-Keen Kutter #6
Bailey #6
181 2 Jordan planes- No. 3
made in Germany
182 9 assorted planes
At least 5 Stanley’s, 1 Goodall,
183 11 planes-various brands
184 Plane blades & parts
Stanley #45 in pieces
185 Large lot of unsorted planes
186 Assortment of sockets & wrenches, Craftsman
187 Wrenches, pipe wrench, misc. tools
188 Primitive hollow auger/spoke cutter hollow auger
189 Assorted primitive tools/machining tools
Auger bits/ planes/ tool handles/reversible screw driver/more/level glasses
190 1910 plane
191 Bits and blades
I.J. White
192 Machinery and tool books/Science books
Stanley/Chemistry and Physics/ Indiana Toolmakers and Their Tools
193 Books- woodworking, mechanical drawing, tool
collecting, machine drawing
194 3 calipers- Starrett Co., Millers Falls
195 Chains, need ends
One choker chain complete, two longer chains missing one hook, each, assorted chain parts
196 Drafting & molding tools
Knives
197 Assorted tools & supplies
Forester bits, oil cans, level, squares, machining, items, folding camera, splitting wedge, lots of miscellaneous
198 Lot of plane parts
199 Wilton, Morgan wood vises
Also Columbian, only one handle
200 30” x 96” cabinet grade plywood 3/4”
additional piece 9" x 96”, some scratches currently used as workbench
201 Squares, electronic digital readout, drafting
tools Wixey Brown and Sharpe Mfg. Co.
202 Early Craftsman toolbox on rolling stand
24" wide
203 Tool stand work bench
Top is 29" x 21” Legs wider at bottom
204 Makita router with fixtures
3 fixtures
205 Wood shelf on cart
30" x 27” x 21” Sitting on dolly
206 Commercial cast-iron table saw 3 PHASE
Untested, appears to not have been used for a number of years. Originally came from school system.UPDATED: this has a 3 phase motor.
207 Lot of walnut wood
Small trim pieces included, species, unknown, or not sure of on large large plank
208 Machinist's chest, contents, bits
Bits, files, more
209 Pine common framing lumber
210 Hydraulic 1.5 ton trolley jack
211 Machinist tools- micrometer, straigh edges,
squares, caliper, tap and die, more
212 Machinist tools- compass, gauge blocks
measuring tools, more
213 Assorted machinist tools
214 Cable winch
Untested
215 2 boat anchors and rope
216 Machinist tools/ planes
217 Sledgehammer/hydraulic hand jack/winch/4-way lug
wrench
218 Bayley core box plane
219 Assorted tools
Level/squares/ramp plates/saws/folding tape measures/tool belt
220 36" x 54" maple table w/ one chair
unusual stretchers that are loose from table currently. Just needs re-tightened. Leaves are hidden under the table.
221 Selection of log hardwoods-spieces unknown
222 Selection of hardwoods
Osage, walnut,
223 Avodire wood
1.5" x 4” x 66”
224 H shop press-12T
36" wide throat
225 Pair of folding sawhorses
226 2 mitre boxes
Black one is a vintage Miller Falls miter box
228 Live edge wood slabs
8 total pieces
229 Vintage Stanley router planer kit
in metal case, with router. Planner is included. Original book included.
230 Box of unsorted planes
On dolly
231 Stool, cabinet, cafe doors
4 wheel dolly, wooden shelf
232 New shipping boxes
233 Misc tools- planes and parts/Starrett center finde
lathe tools
234 Warehouse cart
Rolls good, 24" x 36”
235 2 miter boxes and 2 saws
Saw may not fit the miter boxes
236 2"x10" yellow pine- 9’6"
Two more cut off pieces, 4 x 4 treated 10’ & 5’
237 Assorted hardwood planks
238 Dolly cart and Guardian Power drill press
Works as it should 12-speed Heavy duty
239 Large lot of assorted lumber
Many varieties of hardwoods, some antique furniture, wood, large walnut, glued up plank
240 Small hardwood, cut offs, good for turning
241 Group of extension cords
242 20 pcs. 1" x 5.5” cedar
Believe to be cedar, possibly fir, approximately 8 foot long
243 Assorted miscellaneous- paint suits/chess pieces/
Mini binoculars/ gaugeson wood piece/VEE Engineering plastic cups/ vise grips/tree topper
244 20+ pcs hardwood
Believe to be white oak or ash. Various width minimum of 1 inch thick, some thicker 8 to 10 foot random lengths
245 Trim & mouldings- hardwood
Some appear to be walnut 2 large boards- one is possibly barnwood
246 2 shelving units and contents
Large assortment of hardware- nails/brass screws/bolts/washers/alcohol
247 Walnut boards
Some is 1/2 inch thick, some is 1.5 inches thick 6 to 8 foot random lengths
248 2 cabinets and contents
Hand tools and more- Stanley, Craftsman, and more
249 Shelf of hardwood & hobby wood
Some planks, many boards, lots of small short cut offs for turning
250 Contents of cabinet- air hose, light, clamp
auto hammer Much more. Cabinet is sold as #140.
251 Stack of hardwood-spieces unknown
Will update if find out
252 Assorted hardwood lumber
253 Stack of hardwood cut offs-NOT THE CART
CART NOT INCLUDED
254 2 hardwood planks
Spieces unknown 2 x 10 x 11’ 2 1/4" x 7 1/2” x 12’
255 5 short hardwood planks
3-4’ long
256 Assorted boards & lumber
257 Dust collection unit, vacuum
Penn state 1HP blower
258 2 propane portable heaters
30-80,000 BTUs
259 Shop vacs
3 units
260 Fans & milkhouse heater
Fans are very dusty
261 Motors & scrap
262 Saw blades on wall
263 Bench top band saw
264 Max Tool shop cart
16" x 30” x 32”
265 Dave Lawson original design- whatcha' ma call it
Homemade drilling or router jig. Made to rotate to directions.
266 Lot of wood along wall
Cabinet plywood, oak table top, 6 foot ladder, Barnwood, planks, cabinet, plywood, pegboard sheets, bendable, plywood,
477 Wheelbarrow
478 Tile roof pieces-edging
Great for garden edging approximately 25 pieces
500 Assorted table linens
Runner – 50 x 22 Round cream tablecloth – 70 inch diameter Round white tablecloth – 56 inch diameter White rectangular tablecloth – 52 x 78 – has some tears Green rectangular tablecloth – 60 x 96
501 Miscellaneous collection
Includes slide carousels, Nat King Cole Unforgettable album, Rod Stewart CD’s, Richmond High School photo and more
502 Queen metal frame & box spring
On castors
503 Men's and women's clothing- modern
Men's suits- 34"/36" waist pant Most women's clothing- 20W
504 Wood and corner of sunporch
505 Pair of tables and a stool
Stool - 19" high, 11 3/4” deep, 24” long Folding table - 28 1/2” square, 26” high Rectangular table - 32” wide, 21” deep, 25” high
506 Shelf and wall decor pieces
507 Floral fabric sofa
Some discoloration near head rest area
508 Visioneer One Touch 7600 scanner
Appears to be new in box
509 Christmas greenery and picture frames
Located in basement. Buyer responsible for removal.
510 Old crib and tiered stand
in basement. Buyer responsible for removal.
511 Vintage globes and fixtures
One globe is cracked - see pictures
Click for Fr8Star Freight ShippingGet Shipping Quotes