Cat 3208 motor that has been recently installed, pto-big 1000, 3 pt., 3 hyd. Remotes, ser. #275629-418, showing 4124 hours, tractor is mechically sound

26', 9" spacing, field ready

2 hopper, 16.5L-16.1 tires(one tire is a 21.5L-16.1), 300 Bu. w/ extensions, gear has some welds, good wagon

2 hopper, 16.5L-16.1 tires, 300 Bu. w/ extensions, good wagon

2 hopper, 16.5-16.1 tires, 300 Bu. w/ extensions, ladder has damage, gear has some welds, good cart

2 hopper, 16.5-16.1 tires, 300 Bu. w/ extensions, ladder has damage, gear has some welds, good cart

30", vac planter, hyd. fold, w/ markers, bean units

30"

212, 060, truck has been converted to LP, 4wd does NOT work, truck runs and drives, gooseneck hitch, DMI bumper, show cosmetic issues normal with a truck of this age

Gas tractor, 2 pt. quick attach, hydrostatic drive, showing 2043 hours, original paint ractor, Ser. #33728, straight tin, runs and drives as it should

Tractor has been converted to LP, Ser. #32191, 3 pt., 2 hyd. Remotes, hydrostatic drive, conversion was done very well, showing 6158 hours, runs and operates as it should

5' top deck, max rated GVW 20,000 lbs, triple axle, solid floor, uncertain on the condition of the electrical, solid trailer

4 Cyl. Wisconsin Engine-gas, new battery, 5' bucket (will need repair)currently does not run-will fire but will not stay running, Will need tune up. SO BID THAT WAY.

Tractor has been converted to LP, Ser. #31690, showing 7039 hours, conversion was done well, 3 pt, hydrostatic drive is OUT!!

45' booms, hyd. Pump

Has been shedded for a few years, worked as it should when put away

Wire tie, has been shedded for a few years, worked as it should when put away, may need some fine tuning-but good outfit

26'

Newer floor, pto driven, 5' x 13', good outfit

3pt. Bracket will have some welds, 21'

Gooseneck, center divide gate, used last year, the floor WILL need attention

Solid deck, laminated tires, 1000 pto, used last season

Ser. #1696-23918, showing 1800 engine hours, combine was always shedded, runs and functions as it should, new batteries,

Diesel, 2 hyd. Remotes, 3 pt. duel pto, Ser. #2510148U015603, original paint, straight tins, duals, inner tires are newer and nice, showing 5281 hours, note wheel weights on front,

Remlinger 3 Bar Dragtooth harrow, one wing hose is leaking

Runs and operates as it should, 3971 engine hours showing, Ser. 3169623569, likley need some minor tune ups before using

Ser. #1859-57663, good unit

Homemade

Ser. #T7VB313, bought a few years ago, used it a handful of times, worked every time

8" wide x 6' long. PHOTO IS NOT THE ACTUAL EXTENTIONS

Electric motor and HD 220 cord

13', no maker's markings, will have a few welds

14' x 7', WILL HAVE to be trailered home, has two bad tires, solid deck

Tongue is broken, SEE Photos

Ser. #1859-40291, most likely parts ONLY

12' x 7' deck, solid deck, will need trailered home, has one bad tire

Box only, wooden extensions

Likley parts only, setting on a long running gear as a head cart, will need trailered home

Setting on runners, 15" x 10'

SEE photos, bottoms are good, one is missing the lid, other is missing the bottom covers

Has been in shed fro several years

Comes w/ a 16" and 24" augers

Good working order

Bought several years ago, drove it to the farm, has sat for several years, selling it in NON-Running order

Steel wheels, 7' blade, tree included

Appears to be good and complete

3pt. & 2pt. Quick attach

Head is complete, WILL need trailered

8' x 7' tall x 5' wide

Meter is reading that it still has gas in it

One will have lid and floor will be rotted, other is missing lid

Will need trailered

Will need trailered

Likley parts only, appears to be complete however

Likely parts only, appears to be complete however

Upt to 1 1/4"

Foreign

Umknown condition

Standard & Metric

SEE PHOTO, not complete

24" x 12"

Cans will clean up, just covered in grease

Metal box w/ decals

2" to 7/8"

2 will be Ridgid

Good Steel Box

Largest being 12"

18" x 15"

Handle is broken on one

Craftsman and others

Good working order

Atahced to homemade base

Buyer must remove

Unknown condition, ran a couple year ago and has been sitting

Contents will be removed, 24" x 48" x 34", w/ 1/2" table top

Buying all rod in box

There is a LOT of good hardware here

Buyer must remove

Good working order

NEW, almost complete roll

Has repair

New, never used

5/8" press

Good compression, condition unknown

Various sizes

Good working order

15.5 x 38

Unknown working order, been in shed for years, is tires are flat

Selling for parts ONLY, condition unknown, has been in shed for several years

35" x 40" x 26"

Lubster is half full of oil, 30 gal

Condition unknown, ran a few years ago, been is shed, 100 gal tank

Buying all contents of workbench, welding bench, floor, ect, lots of scrap and tools, YOU are responsible for knowing what you are bidding on, note what items have sold in the prior lots

46", good

24" x 35"

38" x 14"

one is about 6" short

Has holes and wear

28", used a couple years ago

60" x 108", NO TITLE, needs tires

See photos, buying what is pictured

6 & 6 1/2' posts

Buyer must remove

Buyer must remove from farm

Buyer must remove from farm