**Title in transit** *Runs and Drives *VIN# P53K019198 *6 cylinder inline gas engine *Manual transmission *Flat bed with ramp *Has been in storage for several years *Sold as is *Title is in transit and will be mailed to the buyer within 6 to 8 weeks after the sale

Project truck, has been sitting for many years, Dual wheels included, Engine spins free, no title, Non Running, sold as is

*Serial number 16654 *4 cylinder engine *5 speed transmission *2 point fast hitch *540 PTO *Hours not ledgible *Tractor not currently running, had running in august but lost spark.

*6000 pound capacity *Slant 6 engine that runs on propane *Runs and drives

*Serial number 3646 *Starts and runs *No Key, owner has been starting with screwdriver *Hydro works *Repainted *Seat has been replaced

*Serial number 56208 *1228 hours shown *Repainted *Hydrostatic drive *Runs and drives

Steering box complete and not broke, front axle complete minus minus steering link to box, both bull gears in place

John Deere running gear with rack built for wheat bundles, 4 like new Sampson tires

Unknown brand running gear with rack built for wheat bundles, like new Sampson tires

no title

Diesel powered air compressor on 14ft PJ tandam axle trailer, John Deere engine, used for sandblasting, some hoses and blasting hood/helmet included, pressure pot not included, was used a few years ago, has not been started recently, no battery included, sold as is. Sold with no title

On tandam axle trailer, 33hp Johnson outboard motor, boat has been stored outside for years, engine stuck, Non-Running, no title, sold as is

no title, with cap, more photos coming soon

Deck measures 14'x10', has steel wheels, deck has some rot

Built by the C. D. Edward's company in Albert Lea Minnesota, needs work

Ryan Economy Dual Blade pull type road grader, built by the Ryan Manufacturing Company in Chicago Illinois, 12 foot blade, overall length of 21 feet including tounge, blade raises and lowers as it should.

Project combine, original 6 cylinder Continental engine, 2 brand new tires, no radiator found, sold as is

22 inch cylinder, 38 inch separator, on rubber tires, used at a show this year, original decals and lettering, all belts in working order

28 inch cylinder, 46 inch separator, steel wheels, used about 10 years ago, original stenciling

Keck Gonnerman Indiana Tractor Special threshing machine, 28 inch cylinder, 50 inch separator, on pneumatic tires, all belts that are on it are new, was used several years ago at a show, original stenciling

Case "Farmers Friend" threshing machine, was last used 6 years ago, front axle strated to crack and is held together with a top and bottom steel plate, unknown cylinder size, machine is very large, unknown current condition, sold as is

All original, used once about 10 years ago

Used consistently every year, sells with everything needed for transport mode, extra twine, 1 new canvas

ground driven, complete

on cart, belt pulley, no C/B/W noticed, is loose

On cart, American Bosch mag, has belt pulley and starting crank, missing gas cap, no C/B/W noticed, turns free

No C/B/W noticed, belt pulley, engine and generator turn free

On cart, Wico mag, spark plug ignition, no C/B/W noticed, turns free

Spark plug fired, gasoline engine, starting crank, no C/B/W noticed, turns free

on cart, clutch pulley, repairs on head, turns free

Kerosene burning engine, Wico magneto, spark plug fired, belt pulley, turns free

Piston is out of engine, on 2 wheel cart, belt pulley, no C/B/W noticed, crank spins free

igniter fired, no C/B/W noticed, on cart, turns free

On cart, belt pulley, Wico mag, no C/B/W noticed

on cart, spark plug fired, belt pulley, no C/B/W noticed, turns free

On home made 2 wheel cart, engine stuck, mag bracket/rear cover broke, belt pulley, sold as is

On cart, belt pulley, Wico mag, no C/B/W noticed, spins free

unknown manufacturer or exact application, engine loose, ran several years ago

non running, engine is loose

Non Running, some parts missing, for parts or repair

Unknown condition, not currently running, no C/B/W noticed, spins free

Non Running, some parts missing, for parts or repair

Non Running, Engine Spins Free

Model BKN, Non Running, spins free

Unknown condition, Non Running, spins free

For Parts or Repair, some parts missing, Non Running, spins free

Emerson Brantingham steam engine moldboard plow, in 2 pieces, unknown if any parts are missing, see photos ford details

Steel wheels, 2 coulters, trip plow with Hydraulic option,

Chain lift, 2 coulters

Pneumatic tires, 4 matching coulters, tail wheel rim and tire are damaged

3 bottom plow on pneumatic tires, tires are brand new but have been sitting flat and are cracking

IHC 4 bottom trip plow on steel wheels, all 4 matching coulters, tail wheel has been welded on

Pneumatic tires in poor condition, all 4 coulters

Bottle cap lift wheel, no coulters, Hitch missing,

2 coulters, Hitch needs work

Plow has been modified many times, converted from trip to hydraulic lift, Plow is in poor condition, for parts or repair, has all 5 coulters and hydraulic cylinder.

7 disc plow, has been repaired, built by the Newell Sanders Plow Company

Labeled Noble cultivators limited, The Wyatt Manufacturing Company, and The Jayhawk, has hydraulic cylinder, not used for many years

Unknown manufacturer, approximately 28 feet wide, has hydraulic cylinder for spreading wings, not used in many years

Approximately 20 foot wide, 5 spring tooth drag sections hooked to 1 spreader bar, set up for Hydraulic lift, no Hydraulic Cylinder included

8ft Wide bush hog mower, 540 PTO, 3 point hitch, has been mounted on tractor since bought new, unmounted for first time for these photos.

540 PTO, on cart, 110 and 220, has not been used in years

unknown working condition, sold as is

unknown working condition, sold as is

2 hole corn sheller on running gear, rear axle fell off and is being held on by straps, can be remounted with new bolts, some rot in the wood in various places, project machine and needs work, comes with new buckets for grain conveyor

Various plastic hunting decoys

built by the CF Bender company, brand new never used, 10 thousand pound capacity each

Was built as part of a small black smith display, was never used, bolted to floor, Comes with extra shafts and pulleys, Frame measures 9ft tall x 10ft wide x 5ft deep. Buyer responsible for removal, forklift on-site to assist in loading

new, never used

and 9" wide, base has a footprint of 19x52

Fan set up with flat belt pulley for hit and miss engine

One front and one rear wheel for Allis Chalmers 20-35. Rear wheel has bull gear with worn and broken teeth

One extention rim, unknown manufacturer or fitment, measures 52½" in diameter and 6" wide

Hart Parr round spoke rear wheel with homemade extension, gear guard, and bull gear

Extension rims, unknown fitment, measures 51" in diameter and 9" wide

Steel wheels, some cracked and repaired spokes

Pair of clam shell Fenders

One extension rim with 2 clamps, measures 46" in diameter and 6" wide

Bucket of lugs

Unknown tractor fenders

Unknown manufacturer, all original with original stenciling, spins free

original condition with original stenciling still visible, lower divider currently held up with rope

original condition with original stenciling still visible,

1 full pallet and 1 partial pallet

Complete buzz saw unit

Complete buzz saw on frame with holes for stakes.

Buzz saw mandrels and misc parts

Engine carcass including crankcase, crank, and flywheel

Engine carcass with crank shaft and flywheels, jug, and base, unknown manufacturer

Pair of flywheels on crankshaft, measures 17" in diameter and 1¾" thick

Pair of flywheels, measure 24" in diameter and 2¼" wide

Engine base with gas tank

Misc. Pulleys/wheels on pallet. Buying whole pallet

Misc. Pulleys/wheels. Buying whole pallet

Original patina with years of Nebraska certification stickers on it. Has several weight disc's

For use on a bucket, 36 inch usable length

One simplex and 2 Duff manufacturing

6 Coulters, 4 are matching marked M-H

6 blades

Has electric motor, original condition, unknown if works

From Grader or Similar

*incomplete, no title, for parts or repair

Used Fenders and home made tool box from a Rumely 30-60 model E

Water tank platform and bunkers from a 50 HP Case. Rusty and used, could be used for a pattern or display

Pulley, hand crank, and steering wheel

Pipe mount style pallet forks, 42" long

Pipe mount pallet forks, 42" long

Measures 9ft

Has wood rot, needs repair

Has wood rot, needs repair

One complete and one half hay grapple, half grapple is marked Louden