20" diameter, 20' long section of double wall plastic culvert pipe

Section of steel pipe, 26" diameter, 19' long, 1/4" thickness

Section of steel pipe, 26" diameter, 14' long, 1/4" thickness

60" x 60" square cast iron tree grate, marked Canada

60" x 60" square cast iron tree grate, marked Canada

10 pieces of 1/2" thick, 11 1/2" wide steel flat bar: 10', 17', 19', (2) 20', 20' 10", 22' 5", (2) 23' and 23' 9"

Quantity of used corrugated steel panels, 21' 3" long

Quantity of assorted steel, short sections, pipe, channel, angle, rebar, etc.

(Qty 4) 4" diameter steel support posts 11' 4" long, (1) 5" diameter 12' 8" long, (2) 3 1/2" diameter 9' 7" long and (1) 3" diameter 16' 9" long

(Qty 4) 3/8" thick, 5" x 5" steel angle 10' long, (3) 5" x 3 1/2" x 20' long, (1) 5" x 3 1/2" x 11' 8" long, (3) 5" x 3 1/2" x 7' 4" long, (1) 6" x 3 1/2" x 19' 10" long, (1) 6" x 3 1/2" x 16' 4" long, (1) 6" x 3 1/2" x 15' 4" long, (1) 6" x 3 1/2" x 11' 4" long, (2) 6" x 3 1/2" x 10' 3" long, (1) 5 1/16" thick, 5" x 5" x 15' long and (1) 3/8" thick 6" x 4" x 11' long

Assorted used structural tube steel, (1) 8" x 8" x 22' 3" long, (1) 6" x 8" 15' 7" long, (1) 6" x 10" x 16' 7" long, (1) 6" x 14" x 24' 7" long

(1) 6" x 18" x 20' long, (1) 6" x 18" x 23' long, (1) 12" x 12" x 22' long, (2) 6" x 6" x 19' 9" long, (1) 6" x 6" x 16' long, (1) 6" x 18" x 18' 4" long, (1) 6" x 6" x 7' 7" long

Quantity of 5" and 6" diameter concrete filled steel support posts, various lengths up to 14'

Prep table with stainless steel top 48" x 30" x 33" and assorted booth frame work

(Qty 6) various sections of I-beam: (1) 8'L x 5"W x 12"T, (1) 8' 6"L x 5"W x 8"T, (1) 9'L x 5"W x 8"T, (1) 9' 3"L x 6"W x 6"T and (2) 13' 7"L x 6"W x 10"T

(Qty 3) various sections of I-beam: (1) 17' 3"L x 6 1/2"W x 12"T, 20' 7"L x 5"W x 14"T, 20' 4"L x 5"W x 14"T

(Qty 3) various sections of I-beam: (1) 23'L x 7"W x 16"T, (1) 23'L x 8 1/2"W x 16"T, 21' 11"L x 7"W x 16"T

Werner fiber glass ladder sections, (2) 14' sections (one section has a damaged outside rail)

Polaris Sportsman 500 H.O. AWD, EFI, Badlands 2500lbs winch, 60" snow plow, (NON RUNNING CONDITION), engine turns over, but there is no spark

Smith 100 towable air compressor, Ford 5.1 liter V8 gas engine, 3381 hours on the meter, with hose, runs and make air

12V scissor lift work stable with platform, 6' 5" x 2' 7" x 30", lifts to 14', 1200lbs lift capacity, Mite-E-Lift model 1200-14

Pair of steel snow plow shoes

Quantity of assorted scaffolding sections, braces, feet, wheels, and more; 25 total sections

Ingersoll Rand model RX-654H Jumping Jack tamper with Honda GX160 gas engine, it works

Stone model #528A gas powered plate compactor with Predator 212cc engine, it works

Assorted dune buggy parts: starter, steering box, manifold, carburetor, pedals, two rims, etc.

(Qty 2) tree stand safety harnesses, Tip up ice line, ice reels, battery operated boat anchor and navigational lights, (12) tree stand steps with straps and more

(Qty 4) working electric motors: AO Smith 1/3hp, Baldor 3/4hp, Century compressor motor SPI?hp, GE 1/4hp, all single phase

(Qty 4) working electric motors: Powr-Kraft 1/2hp, AO Smith 1/2hp, Baldor 1hp, and unmarked 1/2hp, all single phase

(Qty 3) working electric motors: Westinghouse 1/2hp, Century 1hp, and AO Smith 3/4hp, all single phase motors

Miscellaneous John Deere MC420 parts: sprocket, gears, etc.

Estway multi function ladder 12' 6" ladder, 225lbs capacity

OTC Vanguard electric two stage high pressure hydraulic pump with ram

Original Coronet model 35R sheet metal shear

Central Pneumatic 40lbs capacity blast cabinet with Shop Vac 2.5gallon, 2.5hp

Master 55,000btu kerosene force air heater

GE 1/3hp single phase 115v electric motor with Hase gear 1/90 gear reducer (formerly commercial automatic gate opener)

GE 1/3hp single phase 115v electric motor with Hase gear 1/90 gear reducer (formerly commercial automatic gate opener)

Skat Blast S-35-M power gun and Central Pneumatic blast gun with gravity feed

Hanson, "The Viking", model 8910 100lbs capacity hanging scale

Dewalt D28715 14" metal cutting chop saw

Stihl TSA230 36 volt battery operated cut off saw, 9" abrasive wheel, two batteries (2Ah & 6Ah) and charger

Cover Pro portable car canopy, 10' x 17' x 9' 3" tall, (new in the box)

Metal tool box with two torch heads, adapters and an assortment of torch tips

Craftsman model #624.54290 and Air Co style #9803 torch heads

Air Co style #9803 and Purox W-300 torch heads

Yale & Towne 1/2 ton chain hoist

Sherman Reilly 78 series, high strength aluminum stringing block, 20" x 3 1/8" rubber lined wheel (in good condition)

Bestco Blocks 7" snatch block pulley

Adjustable top link

Husqvarna 125B gas powered leaf blower

40 gallon poly tank with 12V sprayer with wand and hose

Fastway, 2" Reese style drawbar, adjustable height, 2" and 2 5/16" balls and bolt on pintle style hitch

Assorted stranded electrical wire, 14AWG, 10AWG, 12AWG, various quantities

Partial box of 2", #7 coarse thread dry wall screws, 10+ pounds

Quantity of assorted new hardware: large nuts and bolts, stainless steel bolts, sheet metal screws, etc.

Vintage warehouse cart iron wheels and hardware, (2) 13" wheels with axle and (2) 6" caster wheels

(Qty 3) assorted bolt cutters, Craftsman pipe threader with dies and HKP No. 8690CK Guy Strand ratchet cutter

Ridgid 24" pipe wrench

Jobsmart 20 gallon abrasive blaster

10" electric wet grinder, GE 1/3hp electric motor

Ener Pac model E11-39EL7 porta power with 10 ton short ram

Three working bottle jacks, (2) Spartan 12 ton and (1) Spartan 15 ton

(Qty 2) Eagle 15 ton capacity bottle jacks

(Qty 2) Eagle 15 ton capacity bottle jacks

Drum top style dust collector with cardboard drum, Emerson 1/2hp 115 volt single phase electric motor

Tow behind electric cement mixer concerted to parts tumbler/ cleaner, Marathon 1/3 hp 115 volt single phase electric motor

Goldblatt model PG051871-55P tile saw, 14" blade, 1.5hp 115/220 volt single phase electric motor (no plug)

Barnett Wildcat C6 cross bow with Barnett 4x32 scope, cocking string and three bolts with attached quiver

Two man cross cut saw with handles

Stainless steel food service steam table containers: (1) 5 1/4" x 5 3/4" x 6", (10) 5 1/4" x 5 3/4" x 4", (15) 11 1/2" x 5 3/4" x 4", (4) 11 1/2" x 5 3/4" x 6", (1) 18" stainless mixing bowl, and (9) aluminum baking trays 12" x 17"

Stainless steel food service steam table containers: (Qty 11) 5 1/4" x 5 3/4" x 4", (14) 11 1/2" x 5 3/4" x 4", (3) 11 1/2" x 5 3/4" x 6", (10) aluminum baking trays 12" x 17" and aluminum rolling cart for trays 21 1/2" x 26 1/2" x 29 3/4"

Hyundai 250 excavator final drive parts: XKAH-00491, D131155 and D107589

Stone model 617PM gas powered tow behind cement mixer, Honda Gx160 5.5hp engine, it works

Honda 200 fuel tank (dented), assorted Honda 250SX parts: fender, fork parts, throttle cable, etc.

V&M Co Darling, Williamsport, PA fire hydrant, 8 1/4" base, approximately 36" tall

Steel tank on metal skids, 36" diameter, 73" long, empty

Steel tank, 48" diameter, 71" long, empty

Quantity of assorted conduit fittings, couplings, elbows, etc.

Pair of truck tire chains, would fit Lot 20 dump truck

Pair of tire chains, 17"W x 9' 6"L

Pair of tire chains 19"W x 11' 9"L

Pair of light duty truck tire chains 12"W x 5' 6"L

Pair of light duty truck tire chains 16"W x 6'L

(Qty 2) pairs of garden tractor tire chains 16"W x 6' 6"L and 14'W x 43"L

Pair of garden tractor or light truck tire chains 12'W x 5' 6"L

Pair of tire chains 20"W x 5' 9"L

Antique grind stone, 27" diameter, 3 3/4" thick

Quantity of various size steel pipes, 1 1/4" to 6" diameter, 26" to 7' 6" long

Miscellaneous galvanized duct work and two sections of expanded steel 10'L x 39"W and 6' 10"L x 39"W

Quantity of lawn tractor rims with tires, the rims are in good condition, tires in various conditions (some weather checking), (6) front and (8) rear

1996 GM one ton truck parts, rebuilt automatic transmission, radiator, grill and hood

Dynamo coin operated billiards table with key, balls, cues, 7' x 4' x 32"

Two over two drawer oak dresser with attached mirror 41 3/4" x 19" x 33" with mirror it's 72" tall

Duke commercial deep basin stainless steel sink with drain board 36" x 27" x 38", basin is 16" x 21" x 13 1/2"

(Qty 9) 2" x 8" x 12', (3) 2" x 8" x 8' and (6) used 2" x 10" x 8'

(Qty 3) pressure treated 4" x 4" x 12' and (6) 4" x 4" x 16'

Please make sure you can pickup on this date. Pick up will be Sunday, November 10, 2024 from 11 am to 3 pm at Purcell Road, Gillett, PA 16925. Any questions concerning pick up call Kyle at 570-418-0987 or Dustin at 570-418-0935

WE DO NOT SHIP TO CANADA. All shipping will be done either by USPS or Fed Ex. They will be insured for invoice value. Buyer will be charged for the cost of shipping + packaging fee. Buyer will receive an email with tracking #. If you require shipping call or text Marcia at 570-660-9094 at the conclusion of auction.