1984 Sea Ray Sundancer SRV270 boat, with twin Mercury 5.7L engines. I have not attempted to start the engines, as I do not know if they are hooked up in their entirety either mechanically or electrically. NO trailer! I can put buyer in contact with someone who can move boat for an additional cost. I strongly encourage interested parties to come out and inspect the boat for themselves on preview day. If you cannot make it on that day and time, get ahold of me and we can work something out. This was a project boat that was stored inside until a year ago. The story I'm told by people that knew the previous owner is that this was a salvage boat from Hurricane Katrina, it was purchased in Florida and brought up here, where the previous owner has slowly been working on restoring it for the past 19 years. I was told that both engines and outdrives have been completely rebuilt, but I did not find any documentation of that. Interior of boat needs some work. Anything that I found in the garage that possibly could go with this boat will be included; there's a few boxes of parts, extra fabric, canopies, trim, etc.

Old 16' canoe, we believe it to be a 1922-23 Old Town Otca, in poor to fair condition. Outer canvas was removed at some point, needs restoration. Serial number 68666-16

2017 Cub Cadet Challenger 700 side-by-side UTV. NO registration documents. 4WD, has winch on front, dump bed on rear. Runs good and operates as it should. 584 miles, 73.9 hours. Mfg date 11/20/2016

Ferris IS3100Z zero-turn lawnmower, believed to be a 2008. Briggs and Stratton Vanguard engine. Hour meter is non functional. 72" deck. Mower does run and operate well, I have personally used it all summer to cut the grass at this estate property. It does need a little bit of work; the RF tire goes flat after a day or two, the LF spindle bearings are completely gone, the fuel divert valve needs replacement- currently running off only one tank.

Toro timecutter SS-5000 mower. Starts with a jump, Runs good and operates as it should. Was purchased used for an additional mower for this property. 50" deck. 23hp Kawasaki engine. Needs: battery, front tires go flat quickly

3pt hitch Care-tree tree spade. Fits a category 2 tractor 3pt hitch. Operating conditions unknown, all hydraulic hoses should be replaced due to deterioration. We will have a loader on site that can assist in loading this item onto buyer's truck or trailer.

This 1954 Chevrolet truck was a long term project for the previous owner, and is currently in "basket-case" condition. We do have an old registration for this truck. The lot includes the truck cab, doors, hood, running boards, the original frame with a Mustang II front subframe welded in. There are several totes of parts that are also included in this lot. Totes contain various original parts from the truck, as well as new and reconditioned suspension parts for the upgraded Mustang suspension.

Aftermarket rear subframe from Chassis Engineering, in unused condition. Narrowed 9" Ford rear axle, with Richmond 4.11 gears installed. Also comes with box of mounting hardware, adjustable control arms, adjustable coilover shocks, brackets, etc. Everything is in new unused condition, but was purchased in 1993.

Cragar drag-star Bob Glidden wheels, 15". Never mounted onto a vehicle. Narrow front wheels (15x5) are new in box, wide rear wheels (15x14) have S/C-515 street rod tires mounted. Rear wheels are dirty but will clean up nicely. Paperwork found with these wheels indicate these were purchased in 1992, so the tires themselves may not be good for street use any more. Lot also includes a box of center caps, and two sets of security lug nuts, one set is 7/16" thread, one set is 1/2" thread. Front wheels are 5x4.75 bolt pattern with 3.5 backspace Rear wheels are 5x4.5 bolt pattern with 6.5 backspace

Chevy 350 engine. Block and heads appear to have been disassembled and professionally cleaned, just never reassembled. Also appears to have not been bored oversized. I measured the cylinder bores at the factory 4.000". Comes with many new and used parts (see pictures). Chevy turbo 350 transmission, I don't know anything about it, I can only assume it was rebuilt, but i cannot confirm that. comes with a brand new 10" torque converter. CART NOT INCLUDED, cart will be lot 211a

Metal cart, similar to those used at big box stores. Rolls nice

New Chrome dress-up parts for small block Chevy. Valve and timing covers, oil pan, flywheel cover, aftermarket fan, universal braided stainless hose covers

Weiand dual quad tunnel ram intake manifold, #5984, for small block Chevy, in unused condition. Pair of Holley 4 barrel carburetors #0-9776 in new unused condition. Lot also comes with fuel supply line in new condition, and a Holley electric fuel pump in used condition

Craftsman string mower, 6.75hp, unknown operating condition. Engine does turn over, stored inside

Landa pressure washer, appears to be 3.5hp Briggs and Stratton engine. Operating conditions unknown. Engine does turn over, I did not try to start it

Generac industrial pressure washer, operating condition unknown. Engine turns over but I did not try to start it. Comes with accessories shown. 13hp OHV engine

Equipment Company of America platform lift, manual crank operated, platform will raise to 10ft. 500lb capacity

Large Jobox lockable toolbox, model #682990r5, nice condition. Box measures 61"w, 31"d, 55"h

2 Clarke floor maintainers, one model 1500, one model 1700. 120v. Both worked when tested. Comes with bin of extra heads/pads

Garden hose hangers, in new condition. 3pcs with pole and spigot, 4pcs metal hangers, sections of garden hose, metal watering can

Live trap, good condition.

2 Propane burners, plus an assortment of large pots. Operating conditions unknown, untested

Propane heater, operating condition unknown, untested

2 hand carts, red one has a flat tire

Hand cart, good condition. Tires may need air

Rolling scaffold, good condition. 75" wide, 29"

Rolling scaffold, good condition. 75" wide, 29" deep. Same item as lot 225, this is a second one

Warner scaffold deck plank, measures 7' x 19". Good condition

Miscellaneous pole tents and various tarps and pieces. Unsure if tent kits are complete

Lot of 5 boat bumpers, some are unused

4 drawer wooden cabinet, decent condition. 60" wide, 31" tall, 31"

4 drawer wooden cabinet, in decent condition. 60" wide, 31" tall, 31" deep

Oak boards 1pc 3/4" x 2 1/2" x 11' 1pc 3/4" x 9 1/4" x 10' Plus miscellaneous trim pieces, not oak. All are new unused

One barn beam, measures 7 3/4" x 5 3/4", 93 1/2" overall length

Various lengths of pipe and tubing, including black iron, galvanized steel, and copper

Two 6' ladders, one wood and one aluminum. In usable condition

Lifetime brand tailgating table, measures 2'x4' in good condition. Lot also includes metal step stool

Two shop stools, good condition

Heavy duty mop bucket, in good condition

Ryobi 10" electric 110v table saw, in working condition

Makita 14" electric 110v mitre saw, in working condition

3-shelf shelf unit, comes apart for transport. In good condition. CONTENTS NOT INCLUDED

Stihl MS-170 chainsaw with case, very clean condition, should run. Homelite 240 chainsaw, operating condition unknown, untested

Homelite MP-38 and Target 52-14 gas powered saws. Operating condition unknown, untested. Comes with extra 14" diamond blade

Pile of new and used miscellaneous boat parts, some are new-old-stock. Includes everything in boxes and on shelf, also includes shelf unit. Shelf unit is tack welded together so would need to be cut apart or moved whole. See pictures for sampling of contents of boxes

Stihl FS-56 trimmer, in working condition. Husqvarna 124L trimmer in unknown condition, pull string is broke

2 parts cabinets, full of misc hardware

Grouping of party lights, operating condition unknown, poor condition

Kennedy 5pc rolling toolbox, in good condition. Comes with contents. Middle 3 boxes have keys

Craftsman 2pc toolbox, with contents. Both boxes have keys

Ryobi 10" table saw for parts or repair, NOT working! Motor appears to be seized. Has nice carbide toothed blade

Bosch electric jackhammer, in working condition, with bits and cart. 110v

Two-man post hole digger, 5hp Briggs and Stratton engine, operating condition unknown, untested. Comes with 4" auger

Steamer unit for wallpaper, operating condition unknown

8 boxes of miscellaneous hardware. See pictures for contents

Box full of joist hangers, new condition

3 boxes of miscellaneous lightbulbs and hardware

Tote of charcoal for grill, plus starter chimney. Some bags open

6 pcs 20" x 20" vent covers, new condition

Cast iron door off a woodstove, with lion face

Ridgid R150FSA pneumatic stapler, and Porter Cable brad nailer, both in working condition with cases

3 trays of pneumatic tools, 12pcs in total. All in working condition. DA sanders, board sanders, impacts, air hammer with bits, drill, nibbles, punch

Small Kennedy expanding box, with contents. Contains an assortment of drill bits

2 propane heaters, mini propane stove, and a tray of miscellaneous hardware

Pair of aluminum landscaping rakes

2 gas hedge trimmers, McCullough Mac 110 chainsaw, operating condition unknown, untested

2 Gas powered string trimmers and gas leaf blower, with box of attachments. Operating conditions unknown, untested

Bucket full of various masonry tools

Greenlee 3/16" x 150' fish tape, good condition

Husqvarna 7" diamond grinding disc for masonry. In new condition.

7 horseshoes

Box of padlocks with keys, 11 in all. Mostly Master brand. Plus bag of various loose keys and keychains

Various taps and die set

Box of machinist tools. Micrometers, calipers, transfer punches, etc.

2 sump pumps, one works, one does not

Black & Decker 2hp electric edger, electric string trimmer

(3) 14ga x 25" landscaping extension cords. These have several outlets throughout the length of the cord

2 extension cords. 1- 14ga x 100' 1- 16ga x 20'

Heavy duty extension cord. 12ga x 40', with 4 outlets

Heavy duty extension cord. 10ga x 30', with two outlets

Heavy duty extension cord. 12ga x 50'

Pair of jumper cables, in usable condition

Tote of various cords and pieces, some are extension cords that are missing ends

Miscellaneous household lot, contains decorative NY plates, 2 marble rolling pins (new), electric knife

3 extension cords. 16ga x 50', 16ga x 20', 16 ga Cord with drop light

4 extension cords. (2) 16ga x 25' 16ga x 50' 14ga x 25' with gang box

Box full of power strips, outlet adapters, light duty household extension cords

2 extension cords, both are 16ga x 100'

Heavy duty extension cord. 14ga x 50', missing one end

Lot of miscellaneous hardware, tubing, water filter, lights, etc

2 hose repair kits

Carpet stretcher/ installer. Good condition

Box of various stove and vent pipe pieces

Lot of garden tools and other long handled tools

Lot of garden and other long handled tools

Lot of 3 pinch bars plus 8# sledgehammer

Porter Cable portable air compressor, 2hp, 4gal, works well. Comes with two air hoses

Greenbull 20' fiberglass extension ladder. Good condition

Aluminum ladder stand-off, good condition

Werner 7' fiberglass ladder, good condition

Little Giant folding ladder, with accessories

Gould water/well pump

Large heavy cast iron bell, 20" in diameter

Antique dental cabinet, dated 1922. Upper part is lined with white glass, lower drawer has some glass trays (pictured). Also included is a bag of vintage dental tools. Cabinet measures 40w, 13d, 63h

4 drawer parts cabinet, with contents. Primarily plumbing and electrical supplies, lots of brass fittings. Measures 20w, 16d, 15h

14' aluminum extension ladder, no name. 5' aluminum step ladder. Both in good condition

18 drawer parts cabinet, with contents. Measures 27w, 16d, 46h

Brass railing pieces These pieces are solid brass tubing, not brass wrapped around steel

Pieces of various size threaded rod

Large tile mosaic, measures 36"x36"

Porthole windows decor piece, aluminum, 21"

Brass licensed plumber sign, Niagara Falls NY, measures 22x14

Metal storage cabinet, with sliding doors. Measures 30w, 27d, 41h

18 drawer parts cabinet, with contents. Measures 34.5w, 17d, 10.5h

2 tackle boxes with contents, 2 rod holders, can of lead

Vintage oak tackle box, with contents. Has two tray inserts, and some antique wooden fishing lures inside

Lot of fishing poles, some with reels. Also comes with storage tube

Lot of tiki torches, trash can included

4 bags of older golf clubs, plus partial bucket of balls and accessories

Pair of men's Huffy cruiser bicycles, good condition but tires are flat

Several full and partial pieces of drywall and cement board

Metal storage cabinet, good condition. Measures 36w, 18d, 72h

4 bows, some wood some fiberglass, all need strings. Plus bb gun, non-functioning

Vintage wooden sailboat rudder, no idea what it came off of

3 sheets of plexiglass, unused, measures 4'x8', thickness is 0.082"

2 buckets of tractor hydraulic fluid, unopened

Shelf unit and tote with contents, shop fluids and miscellaneous

Red toolbox with contents, unsure of manufacturer

2 toolboxes with contents, brown one is a Kennedy

Red toolbox with contents, manufacturer unknown

Pair of pullers, one is cable, other is strap

Lot of arc welding rod, and wire for oxy-acetylene welding

3 shop vacuums, Ridgid one is wall mounted. Includes large box of hoses and accessories. All are in working condition

4 newer safety fuel cans, 2 for gas, 2 for diesel. All are empty

Two sandblasters, with 2.5 bags and bucket of sand. Operating conditions unknown

Bosch air nailer, Bosch air stapler, porter cable nailer. Operating conditions unknown

2 porta-nailers, condition unknown

4 drawer wooden storage cabinet, measures 60x30x30

Sundog propane torpedo heater, untested with propane but electrical seems to work

Pair of battery chargers, in operating condition

Pair of gas small engines, Briggs and Stratton 3.5hp and tecumseh 5hp, condition unknown but were stored in original boxes, may be new

Pile of torch and welding hoses, condition unknown

Corner clamp, new. Large dustpan, old wooden toolbox, sickle

Bin full of various ratchet straps, pull straps, and bungee cords.

Pail of various small short chain pieces, cable slings, and box of various plastic funnels

4 buckets of speedy dry absorbant, clean and dry

Box of steel mechanics wire, and box of various clevises

6 brass fire hose nozzles

Box of various forstner drill bits, all in good condition

Tray of various drill bits

Box of saw blades, all sizes, some with carbide tips

2 boxes of miscellaneous hardware

Box of various c-clamps. The two large ones are rusty and need to be freed up

Sears Roebuck dovetail jig

Plastic toolbox full of various hole saws and arbors

Tote full of various work lights, some may need bulbs replaced

2 galvanized steel wash tubs, good condition

Pair of lawnmower tires, size 16x6.50-8, and three trailer hitch balls, sizes 1 7/8" and 2"

2 jacks, 2 jack stands, and a creeper

5 gallon air tank, good condition

Orange and white parachute, I believe it is a round parachute, there's a smaller matching one in the cloth bag as well

4 boxes of various Christmas decorations and lights

3 boxes. Vintage faucet and bathroom parts, vintage ceramic insulators, brass door pull signs, elevator key box

Lot of various gauges, some new some used. One has broken glass face as shown in picture

2 sextants, with cases

4 boxes of staples and nails, boxes may be open but are mostly full

4 boxes of framing nails, boxes may be open but are mostly full

3 totes of various copper wire. Romex, THHN, speaker wire, coax, etc

5 various off-brand pipe wrenches, usable condition

5 Ridgid pipe wrenches, in usable condition

4 Ridgid pipe wrenches, in usable condition

Crate of various drywall tools and caulk guns

4 Lincoln hubcaps, tote of shop rags, round wheeled dolly, doll crib

Lot of hand saws of different types, piece of railroad rail, rubber overshoot, bolt cutters (larger one has chipped jaws)

5 Ridgid pipe wrenches, in usable condition

5 Ridgid pipe wrenches, in usable condition

5 crowbars, in usable condition

Crowbars, prybars, and 36" Ridgid pipe wrenches, in usable condition

2 bags of lawn food (one bag open), and handheld spreader

Box of screws, nails, anchors, etc

Graco cordless paint sprayer, with case. operating condition unknown

Box of TIG welding parts; TIG torches, ground cables, consumables, gas regulator, etc. Conditions unknown

Huge lot of rope, various lengths and diameters. Some is new, some is used. 3 boxes plus bucket of twine

Two lanterns; fuel one has no globe and is in poor condition, Coleman electric lantern, condition unknown

12x12 catch basin for drain tile, new condition

Vintage kitchen grinder/juicer

Box of Teflon tape, in new condition, approximately 100 rolls

2 boxes of miscellaneous hardware, plus a tool bucket with a tool belt

Lot of various hardware, nuts, bolts, washers, etc

Large roll of black plastic sheeting, 6mil thickness, unknown length or width

Square D panel box and circuit breakers

Large roll of 10/3 copper wire

Misc lot, long drill bit, long wire brushes, garage door seal

Lot of stereo equipment, operating conditions unknown, but did power up when plugged in. Speaker does work, but only have 1. Pioneer, RCA, Technics

HookEye brand cutlery grinder/ sander. In operating condition

Gear reduction motor. With variable speeds , comes in non matching case

Air blower, from an inflatable yard toy

Clear plastic sheeting, black plastic sheeting, fabric painter's drop cloth

Vintage wooden toolbox, with contents. Missing a couple drawers

7 coolers, in usable condition

Rinse and vac cleaning machine, operating condition unknown

Spool of rope, length unknown

Barth sheet metal crimper, good condition

Milwaukee router, in case, working condition

Kreg jig for dowels, and a remote powered pencil die grinder

Chicago electric powder coating system, appears to be unused, comes with 3 cans of powder paint

Metabo angle grinder, with case and accessories. In working condition

Craftsman router, in working condition

Bosch roto-zip, with case and accessories. In working condition

B&D angle drill, with case. In working condition

B&D electric hammer, with case. In working condition

Porter Cable portable band saw, with case. In working condition

Makita sander/polisher, with bag. In working condition

10" orbital car waxer, unused in box

Bosch impact jackhammer, with case and bits. In working condition

Senco screw gun, in case. Comes with 2 containers of screws. In working condition

Milwaukee Sawzall, with case and extra blades. In working condition

Manifold gauge set for HVAC, 3 mixers, and scrub brush attachment for power washer

Pair of bronze boat props, approximately 18" in diameter

4 boxes of vintage light fixtures and globes

Ridgid tripod pipe stand, in good condition

4 Ridgid pipe cutters, in good condition

Two pipe threading heads, Ridgid #4-P, and Toledo #2

Fall harness, unknown condition

2 pairs of plastic saw horses, in usable condition

Electric jackhammer with bits, unknown brand but looks like possibly Makita

Contents of cabinet, various caulk, adhesive, caulk guns, etc

Lot of 4 power tools, in working condition

Skilsaw worm drive saw, in working condition

Milwaukee drill and screw gun, both in working condition

Lot of 5 power tools, all in working condition

Milwaukee drill and Bosch laminate trimmer. Both in working condition

Box of bits for drain auger. Brand unknown

Contents of cabinet. Propane torch, air horns, brushes, trowels, and more

Pair of MIG welders, operating condition unknown. Linde 160, and Multi-mig

Contents of cabinet- 8 power tools, all in working condition. Jig saw, belt sander, drills, grinder, stapler

Ridgid model 700 power pipe threader, in working condition

Large lot of Ridgid pipe threading dies and handles, and related equipment, all in good condition

Dremel kit with case and accessories, in working condition

Tile Mate tile saw, in working condition

9 power tools, all in working condition.

Contents of cabinet, hoods/shields, weatherstrip, magazines, and more

4 pipe vises, in usable condition

3 bench vises, in usable condition

Vintage saw and wood plane

Skil jigsaw, in case. In working condition

Contents of two drawers, miscellaneous hardware

Contents of drawer, spray gun kit, masking, paint filters, etc

Contents of two drawers; sandpaper and abrasives

Contents of cabinet; home painting supplies

Contents of cabinet; marine radio, various tape, throttle cables, small inner tubes

Contents of 3 drawers; electrical supplies

Contents of cabinet, Dewalt angle grinder and all grinding wheels

Milwaukee box and bits for a hammer drill. No drill included!

Milwaukee drill, in working condition

Auto-tinting welding helmet, appears to be in like new condition

Milwaukee sawzall, older model in case with extra blades. In working condition

Skil roto-hammer, with bits and metal case. In working condition

Milwaukee right angle drill , in metal case. In working condition

Milwaukee sawzall, in metal case. In working condition

Box of various repair parts for faucets and plumbing

Tote full of power and pneumatic tools in NON WORKING condition. Selling for parts or scrap

Box of life vests, 7 pcs total

Bench grinder on pedestal, 1/2hp, in working condition

Miscellaneous aluminum material, and diamond plate

4 unused pieces of rigid foam insulation, R-10 value. Measures 4'x8'x2"

4 antique copper/brass fire extinguishers, all different makers

Drywall lift, appears to be in usable condition

Glass and brass fireplace facade, in new condition

Helium cylinder, still has helium in it but unsure how much. Comes with two regulators with balloon nozzles

3 acetylene cylinders and 1 oxygen cylinder, with cart

Plastic planting trays and fiber pots

Several sheets of used stainless steel

Various light duty saw horses, adjustable roller stand, and wooden table top

48" T-square and two 2' levels, in good condition

Lot of various paint spray guns, conditions unknown

Oster 1/2hp pipe threading head, 110v, has forward and reverse. Motor works

4 pcs air line filters and lubricators, in new condition

7pcs SMC model NAL4000- pneumatic air line lubricators, 6pcs in new condition, 1pc used condition

7pcs SMC model NAL4000-NO4 pneumatic air line lubricators, 6pcs in new condition, 1pc possible used condition

Misc zone valves, flush valves, mostly brass

Large lot of various PVC and ABS pipe fittings, all different sizes; rubber connectors, hangers, clamps, valves, and other plumbing related items. 4 totes in all. 95%+ of this lot is new and unused

New Chrome brass sink drain parts

Lot of various bags of cement, concrete, mortar, and one sonotube. Some partial bags, some unopened. Stored inside, not sure how good they actually are, a few bags seem hard

Lot of fiberglass repair materials. Includes resins, fiberglass sheeting and matting, brushes, and various other bodywork supplies

Tote with 4 boxes of new nails, over 100# in total

Large lot of Rainbird lawn sprinkler parts and accessories, all in new condition

Router table with Ridgid router, plus bag of router accessories and a few bits

Stainless steel kitchen sink, in new condition, with new drain. Also comes with mounting hardware. Measures 25x22

Pow'r Gard generator, 7hp, 3kw, 115/230v, engine turns over, we did not try to start. Operating conditions unknown.

3 plastic toolboxes with contents

Miller tile saw, 1.5hp, 120v, works, comes with foldable stand

3 toolboxes with contents

3 toolboxes with contents

Lot of miscellaneous toolboxes with contents, and 2 pelican cases

4 boxes of tubing benders, cutters, other plumbing related tools, and flashlights

Lot of household painting supplies; brushes, rollers, trays, etc

Lot of router bits, and set of plug cutting drill bits

MK model 101 tile saw, 1.5hp, saw works but coolant pump does not

Lot of PPE, including welding jacket, coveralls, gloves of all kinds, and a couple tarps

Vintage Phototron grow tower, operating condition unknown

Large cutting board, measures 1.75" thick, 25"x26"

5 pipe bar clamps

Liberty sump pumps, 1/2hp, works, appears new

Zoeller sump pump, in working condition

3 boxes, small engine repair parts and air hose fittings

4 pump sprayers, one is new in box

Vintage copper boiler, no lid

Vice grips and adjustable wrenches, in good condition

Various socket sets and torque wrenches, in good condition. 11 pieces/cases in all

2 boxes, miscellaneous pliers, hammers, and hammer heads

Box full of various Craftsman screwdrivers

Box of miscellaneous screwdrivers

4 boxes hand tools. Vise grips, snips, nut drivers, torque wrench, adjustable wrenches

Box of name brand wrenches, including Craftsman, Proto, Williams

Box of miscellaneous wrenches

Box of miscellaneous wrenches

4 totes of miscellaneous electrical, boxes, indoor and outdoor lighting, etc (blurry pic is outdoor lights)

5 pieces of Snap-on, 1 piece Mac (1/2" impact swivel)

Box of 3/8" drive Craftsman sockets, and Craftsman torque wrench

3/4" drive sockets, mostly Craftsman, some Williams. 3/4" drive Craftsman ratchet

Box of miscellaneous 1/4" drive sockets; Craftsman, Williams, and others

Box of miscellaneous 3/8" drive sockets and ratchets, some Williams, mostly off-brand

Box of miscellaneous 1/2" drive sockets and ratchets. Mostly Craftsman and Williams

5pcs aluminum pipe wrenches, 2 are Ridgid, 3 are Pittsburgh

2 machetes, and 1 Plumb hewing hatchet

Box of miscellaneous hammers, and case of matching 25' tape measures

Box of various rolls of solder, approximately 16+ lbs, plus soldering gun kit

Box of various pipe and tubing cutters

2 water pumps, black one is American Products 1/2hp 120v pool pump, and works. Blue one has no cord, so condition is unknown

3 boxes of tools, wire brushes, small levels, and assorted Allen wrenches

3/8" chain, 23ft long, with slip hooks on both ends

Coffing 1 ton chain fall, marked as 30' of lift

Columbus McKinnon 1 ton chain fall, approximately 30' lift

4 boxes of tools, manual and electric staplers with staples, various squares, various types of scrapers, torch strikers and propane tips

4 boxes of tools including tape measures, scissors, knives, plumbing bobs

4 boxes of tools, including snips, files, punches, and wood chisels

Bosch of miscellaneous pipe/tubing hangers and strapping. All hangers are copper coated steel

2 buckets full of mostly new brass valves and fittings, approximately 95lbs

3 buckets mostly new copper fittings and tubing pieces, primarily sizes 3/8" to 1". Approximately 113lbs

2 buckets and two trays of various steel pipe fittings and nipples. Various sizes, mostly 1/2" to 1"

2 conduit benders, in good condition

2 boxes concrete anchors and chem-stud capsule anchors

Simplex house jack

Pallet full of various 2-by lumber

Ditch Witch 1220 trencher, was stored outside, not currently running, 12.5hp Kohler engine does turn over by hand. Operating condition unknown. We have a loader tractor on site to help lift onto your truck or trailer

2 wheel trailer, in poor condition. Tires shot, no deck, no paperwork. Trailer is 5'x8'

Promark model 210 brush chipper, has been stored outside, 16hp Briggs and Stratton I/C engine does turn over by hand, operating condition unknown. Tires flat. We do have a loader tractor on site to assist with loading

Small orange trailer in poor condition, measures 4'x9', tires flat, tongue bent, no paperwork. We do have a loader tractor on site to assist with loading

5 pieces of what we believe to be radiant heat tubing

Two roller carts, were stored outside, bottom one is a little bent

Two rototillers, for repair or parts, were stored outside, engines do turn over by hand, operating condition unknown

Post hole digger, with 8" auger. Was stored outside, operating condition unknown. Briggs and Stratton 5hp engine does turn over by hand

3 boat anchors

Pile of scrap steel

Lawn cart, solid condition

Various metal shelving, no hardware

1991 Chevy 1500 truck for parts/scrap. Been sitting approximately 10 years, not running, rusty, tires flat, no title, do have keys. 5.0L/305 engine

Plastic lawn cart, has flat tires

Large 8cf dual wheel wheelbarrow, tires flat, with lawn spreader

Metal shepherds hook, and 3 metal trellises

Small lawn roller

Lot of plastic barrel, fencing, tar paper, culvert pipe

Lot of plastic blow mold Christmas decorations

Oxy acetylene torch cylinders with cart, plus a couple other cylinders. Were stored outside, poor condition

Pair of vintage steel chairs

Lot of different screens, mesh, and a large dog crate

One section of scaffolding, with extra wheels

Different types and sized of plastic tubing, 5 piles in all

Pallet of fence posts and rebar pieces (some posts bent and need straightening) Lengths 4.5ft to 5ft

Lot of PVC pipe and conduit

Ridgid shaft, not sure what it goes to but looks like a PTO shaft

Lot of 6' fence posts, 57 pieces in all

Pallet of garden tools in poor condition, were stored outside, most handles are rotted. Good for garden decor

Lot of pressure treated lumber, some used, some unused, was stored outside but is still usable

Lot of plywood, mostly 1/2", was stored outside but could still be usable. Some insect damage (ants). Mostly full 4x8 sheets, some partials

Homemade picnic table, with one bench. Needs a little work but wood is solid

Lot of cast aluminum boat parts, mostly lower units. Some housings may be usable but listing as scrap aluminum